1、SAE Technical Standards Board Rules provide that: “This report is published by SAE to advance the state of technical and enginee ring sciences. The use of this report is entirelyvoluntary, and its applicability and suitability for any particular use, including any patent infringement arising therefr
2、om, is the sole responsibility of the user.”SAE reviews each technical report at least every five years at which time it may be reaffirmed, revised, or cancelled. SAE invit es your written comments and suggestions.Copyright 1998 Society of Automotive Engineers, Inc.All rights reserved. Printed in U.
3、S.A.QUESTIONS REGARDING THIS DOCUMENT: (724) 772-8510 FAX: (724) 776-0243TO PLACE A DOCUMENT ORDER: (724) 776-4970 FAX: (724) 776-0790SAE WEB ADDRESS: http:/www.sae.org400 Commonwealth Drive, Warrendale, PA 15096-0001*NOTE: THIS DOCUMENT IS A NONCONCENSUS DRAFT REPORT MADE AVAILABLE BY AN SAE TECHNI
4、CAL COMMITTEE DURING THE PROCESS OF STANDARDS DEVELOPMENT. THE INFORMATION CONTAINED IN THIS REPORT IS BEING DISSEMINATED SOLELY FOR COMMENT PURPOSE AND SHOULD NOT BE RELIED UPON AT THIS TIME.AEROS PACE RESOURCE DOCUMENTSubmitted for recognition as an American National StandardARD50048Issued 1998-12
5、Human Modeling System User Requirements SurveyTABLE OF CONTENTS1. SCOPE . 31.1 Purpose . 31.2 Survey Development . 31.3 Procedure Used to Solicit and Collect User Requirements . 31.4 Procedure Used to Input, Sort and Compile Survey Responses . 31.5 Disclaimer 51.6 Plans 52. USER REQUIREMENTS 61.0 Fe
6、atures - Human Model1.1 Anthropometrics (Figure 1) . 71.2 Biomechanics (Figure 2) . 201.3 Articulation (Figure 3) 231.4 Simulation (Figure 4) . 281.5 Vision (Figure 5) 402.0 Features - Hardware/Software Flexibility2.1 CAD (Figure 6) 432.2 Workstation (Figure 7) . 452.3 Miscellaneous (Figure 8) . 46S
7、AE ARD50048- 2 -TABLE OF CONTENTS (Continued)3.0 Features - Usability3.1 User Documentation (Figure 9) . 483.2 User Friendliness (Figure 10) 493.3 Display/Input/Output (Figure 11) 504.0 Features - Supportability (Maintenance)4.1 Updates (Figure 12) . 554.2 Training/User Support (Figure 13) . 565.0 F
8、eatures - Miscellaneous5.1 Miscellaneous (Figure 14) . 57APPENDIX A SAE USER REQUIREMENTS SURVEY COVER LETTER 59APPENDIX B SAE USER REQUIREMENTS SURVEY INSTRUCTIONS 60APPENDIX C EUROPEAN AIT PROJECT: DIGITAL HUMAN MODEL USER REQUIREMENTS 61SAE ARD50048- 3 -1. SCOPE:This SAE Aerospace Resource Docume
9、nt lists Human Modeling System user requirements with corresponding average score.1.1 Purpose:The purpose of this survey is to formulate and publish a statement of user requirements for human modeling systems, and to promote an SAE standard for electronic human modeling technology. This requirements
10、 document will enable human factors and anthropometric researchers, developers of human modeling systems, and others to ensure that human modeling systems satisfy user requirements.1.2 Survey Development:The User Requirements Subcommittee developed a preliminary outline and format for the requiremen
11、ts survey. The entire SAE Human Modeling Technology and Standards Committee was pooled for surveys of which they were aware and the subcommittee compiled existing surveys and questionnaires. The larger committee agreed that a survey, which elicited general requirements, would not prove useful; there
12、fore, the subcommittee developed a survey, which was intended to elicit and obtain specific user requirements.1.3 Procedure Used to Solicit and Collect User Requirements:Initially, human modeling system developers were pooled for names and addresses of users and a preliminary mailing list was compil
13、ed by SAE. Additional names were added to the mailing list by SAE Human Modeling Technology and Standards Committee members, related SAE committee members, and by word of mouth. Approximately 200 surveys were mailed (see Appendix A for the SAE survey cover letter and Appendix B for the survey instru
14、ctions).1.4 Procedure Used to Input, Sort and Compile Survey Responses:56 surveys were returned within the October 1995 to November 1996 timeframe. Survey response from the European community was low due, in part, to the Digital Human Model User Requirements Survey conducted by the European Commissi
15、ons Advanced Information Technology (AIT), Digital Mockup, Ergonomic Simulation Project (see Appendix C for a copy of AIT requirements).The SAE survey response data was input, sorted and compiled within a spreadsheet. Table 1 provides a summary of responses by type of industry. Table 2 details the r
16、esponses by type of industry, company or institution, and country.SAE ARD50048- 4 -TABLE 1 - Responses by Type of IndustryTABLE 2 - Responses by Type of Industry, Company/Institution and CountrySAE ARD50048- 5 -TABLE 2 (Continued)1.5 Disclaimer:While every effort was made to ensure the accuracy of t
17、he data input, sorted and compiled, SAE and the authors cannot guarantee the survey results. This survey is a tabulation of raw data that is available to users to use as they see fit. There has been no attempt to do anything other than compile the results of the survey and make it available.1.6 Plan
18、s:User requirements for human modeling systems are constantly changing and evolving. Therefore, the User Requirements Subcommittee plans to conduct additional user surveys and update this document periodically. It is hoped that web tools can be utilized to distribute surveys, collect and tabulate da
19、ta, and disseminate results in a time efficient manner.SAE ARD50048- 6 -2. USER REQUIREMENTS:User requirements for human modeling systems are listed according to the survey format below.1.0 Features - Human Model1.1 Anthropometrics1.2 Biomechanics1.3 Articulation1.4 Simulation1.5 Vision2.0 Features
20、- Hardware/Software Flexibility2.1 CAD2.2 Workstation2.3 Miscellaneous3.0 Features - Usability3.1 User Documentation3.2 User Friendliness3.3 Display/Input/Output4.0 Features - Supportability (Maintenance)4.1 Updates4.2 Training/User Support5.0 Features - Miscellaneous5.1 MiscellaneousEach requiremen
21、t is listed with: Number of responses (CNT), and Average (AVG) of how beneficial the feature is with 5 being the most beneficial (see Appendix B); by Industry type and total survey.PREPARED BY SAE SUBCOMMITTEE G-13A, USER REQUIREMENTSOF COMMITTEE G-13, HUMAN MODELING TECHNOLOGY & STANDARDSSAE ARD500
22、48- 7 -FIGURE 1SAE ARD50048- 8 -FIGURE 1 (Continued)SAE ARD50048- 9 -FIGURE 1 (Continued)SAE ARD50048- 10 -FIGURE 1 (Continued)SAE ARD50048- 11 -FIGURE 1 (Continued)SAE ARD50048- 12 -FIGURE 1 (Continued)SAE ARD50048- 13 -FIGURE 1 (Continued)SAE ARD50048- 14 -FIGURE 1 (Continued)SAE ARD50048- 15 -FIG
23、URE 1 (Continued)SAE ARD50048- 16 -FIGURE 1 (Continued)SAE ARD50048- 17 -FIGURE 1 (Continued)SAE ARD50048- 18 -FIGURE 1 (Continued)SAE ARD50048- 19 -FIGURE 1 (Continued)SAE ARD50048- 20 -FIGURE 2SAE ARD50048- 21 -FIGURE 2 (Continued)SAE ARD50048- 22 -FIGURE 2 (Continued)SAE ARD50048- 23 -FIGURE 3SAE ARD50048- 24 -FIGURE 3 (Continued)SAE ARD50048- 25 -FIGURE 3 (Continued)SAE ARD50048- 26 -FIGURE 3 (Continued)SAE ARD50048- 27 -FIGURE 3 (Continued)SAE ARD50048- 28 -FIGURE 4SAE ARD50048- 29 -FIGURE 4 (Continued)SAE ARD50048- 30 -FIGURE 4 (Continued)
