SAE ARP 5606A-2011 Composite Honeycomb NDI Reference Standards《复合蜂窝结构无损检查参考标准》.pdf

上传人:confusegate185 文档编号:1023144 上传时间:2019-03-21 格式:PDF 页数:30 大小:3.52MB
下载 相关 举报
SAE ARP 5606A-2011 Composite Honeycomb NDI Reference Standards《复合蜂窝结构无损检查参考标准》.pdf_第1页
第1页 / 共30页
SAE ARP 5606A-2011 Composite Honeycomb NDI Reference Standards《复合蜂窝结构无损检查参考标准》.pdf_第2页
第2页 / 共30页
SAE ARP 5606A-2011 Composite Honeycomb NDI Reference Standards《复合蜂窝结构无损检查参考标准》.pdf_第3页
第3页 / 共30页
SAE ARP 5606A-2011 Composite Honeycomb NDI Reference Standards《复合蜂窝结构无损检查参考标准》.pdf_第4页
第4页 / 共30页
SAE ARP 5606A-2011 Composite Honeycomb NDI Reference Standards《复合蜂窝结构无损检查参考标准》.pdf_第5页
第5页 / 共30页
点击查看更多>>
资源描述

1、SAE Technical Standards Board Rules provide that: “This report is published by SAE to advance the state of technical and engineering sciences. The use of this report is entirely voluntary, and its applicability and suitability for any particular use, including any patent infringement arising theref

2、rom, is the sole responsibility of the user.” SAE reviews each technical report at least every five years at which time it may be revised, reaffirmed, stabilized, or cancelled. SAE invites your written comments and suggestions.Copyright 2011 SAE International All rights reserved. No part of this pub

3、lication may be reproduced, stored in a retrieval system or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of SAE. TO PLACE A DOCUMENT ORDER: Tel: 877-606-7323 (inside USA and Canada) Tel: +1 724-776-4970

4、outside USA) Fax: 724-776-0790 Email: CustomerServicesae.org SAE WEB ADDRESS: http:/www.sae.orgSAE values your input. To provide feedback on this Technical Report, please visit http:/www.sae.org/technical/standards/ARP5606AAEROSPACERECOMMENDEDPRACTICEARP5606 REV. A Issued 2001-09 Stabilized 2011-12

5、Superseding ARP5606 Composite Honeycomb NDI Reference Standards RATIONALEThis document has been determined to contain basic and stable technology which is not dynamic in nature. STABILIZED NOTICE This document has been declared “Stabilized” by the CACRC Technical Committee and will no longer be subj

6、ected to periodic reviews for currency. Users are responsible for verifying references and continued suitability of technical requirements. Newer technology may exist. Copyright SAE International Provided by IHS under license with SAENot for ResaleNo reproduction or networking permitted without lice

7、nse from IHS-,-,-SAE ARP5606A Page 2 of 30 Copyright SAE International Provided by IHS under license with SAENot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SAE ARP5606A Page 3 of 30 Copyright SAE International Provided by IHS under license with SAENot for ResaleNo

8、 reproduction or networking permitted without license from IHS-,-,-SAE ARP5606A Page 4 of 30 Copyright SAE International Provided by IHS under license with SAENot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SAE ARP5606A Page 5 of 30 Copyright SAE International Prov

9、ided by IHS under license with SAENot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SAE ARP5606A Page 6 of 30 Copyright SAE International Provided by IHS under license with SAENot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SAE ARP5

10、606A Page 7 of 30 Copyright SAE International Provided by IHS under license with SAENot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SAE ARP5606A Page 8 of 30 Copyright SAE International Provided by IHS under license with SAENot for ResaleNo reproduction or networki

11、ng permitted without license from IHS-,-,-SAE ARP5606A Page 9 of 30 Copyright SAE International Provided by IHS under license with SAENot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SAE ARP5606A Page 10 of 30 Copyright SAE International Provided by IHS under licens

12、e with SAENot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SAE ARP5606A Page 11 of 30 Copyright SAE International Provided by IHS under license with SAENot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SAE ARP5606A Page 12 of 30 Copy

13、right SAE International Provided by IHS under license with SAENot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SAE ARP5606A Page 13 of 30 Copyright SAE International Provided by IHS under license with SAENot for ResaleNo reproduction or networking permitted without

14、license from IHS-,-,-SAE ARP5606A Page 14 of 30 Copyright SAE International Provided by IHS under license with SAENot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SAE ARP5606A Page 15 of 30 Copyright SAE International Provided by IHS under license with SAENot for Re

15、saleNo reproduction or networking permitted without license from IHS-,-,-SAE ARP5606A Page 16 of 30 Copyright SAE International Provided by IHS under license with SAENot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SAE ARP5606A Page 17 of 30 Copyright SAE Internatio

16、nal Provided by IHS under license with SAENot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SAE ARP5606A Page 18 of 30 Copyright SAE International Provided by IHS under license with SAENot for ResaleNo reproduction or networking permitted without license from IHS-,-,

17、SAE ARP5606A Page 19 of 30 Copyright SAE International Provided by IHS under license with SAENot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SAE ARP5606A Page 20 of 30 Copyright SAE International Provided by IHS under license with SAENot for ResaleNo reproduction

18、or networking permitted without license from IHS-,-,-SAE ARP5606A Page 21 of 30 Copyright SAE International Provided by IHS under license with SAENot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SAE ARP5606A Page 22 of 30 Copyright SAE International Provided by IHS

19、under license with SAENot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SAE ARP5606A Page 23 of 30 Copyright SAE International Provided by IHS under license with SAENot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SAE ARP5606A Page 2

20、4 of 30 Copyright SAE International Provided by IHS under license with SAENot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SAE ARP5606A Page 25 of 30 Copyright SAE International Provided by IHS under license with SAENot for ResaleNo reproduction or networking permit

21、ted without license from IHS-,-,-SAE ARP5606A Page 26 of 30 Copyright SAE International Provided by IHS under license with SAENot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SAE ARP5606A Page 27 of 30 Copyright SAE International Provided by IHS under license with S

22、AENot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SAE ARP5606A Page 28 of 30 Copyright SAE International Provided by IHS under license with SAENot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SAE ARP5606A Page 29 of 30 Copyright SA

23、E International Provided by IHS under license with SAENot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SAE ARP5606A Page 30 of 30 Copyright SAE International Provided by IHS under license with SAENot for ResaleNo reproduction or networking permitted without license from IHS-,-,-

展开阅读全文
相关资源
猜你喜欢
  • FORD WSK-M4D622-A-2010 POLYBUTYLENE TEREPHTHALATE (PBT) IMPACT MODIFIED 45 % GLASS FIBRE REINFORCEDMOLDING COMPOUND  TO BE USED WITH FORD WSS-M99P1111-A  《45%玻璃纤维增强的聚对苯二甲酸丁二醇酯(PBT).pdf FORD WSK-M4D622-A-2010 POLYBUTYLENE TEREPHTHALATE (PBT) IMPACT MODIFIED 45 % GLASS FIBRE REINFORCEDMOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《45%玻璃纤维增强的聚对苯二甲酸丁二醇酯(PBT).pdf
  • FORD WSK-M4D623-A-2011 POLYPHENYLENE ETHER + POLYAMIDE (PPE+PA) BLEND MOLDING COMPOUND IMPACT MODIFIED  TO BE USED WITH FORD WSS-M99P1111-A  《冲击改良的聚亚苯基乙醚+聚酰胺(PPE+PA)混合模塑材料  与福特WSS-.pdf FORD WSK-M4D623-A-2011 POLYPHENYLENE ETHER + POLYAMIDE (PPE+PA) BLEND MOLDING COMPOUND IMPACT MODIFIED TO BE USED WITH FORD WSS-M99P1111-A 《冲击改良的聚亚苯基乙醚+聚酰胺(PPE+PA)混合模塑材料 与福特WSS-.pdf
  • FORD WSK-M4D623-A2-2011 POLYPHENYLENE ETHER + POLYAMIDE BLEND (PPE+PA) IMPACT MODIFIED MOLDING COMPOUND  TO BE USED WITH FORD WSS-M99P1111-A  《冲击改良的聚亚苯基乙醚+聚酰胺(PPE+PA)模塑材料  与福特WSS-M.pdf FORD WSK-M4D623-A2-2011 POLYPHENYLENE ETHER + POLYAMIDE BLEND (PPE+PA) IMPACT MODIFIED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《冲击改良的聚亚苯基乙醚+聚酰胺(PPE+PA)模塑材料 与福特WSS-M.pdf
  • FORD WSK-M4D625-A-2010 POLYBUTHYLENE TEREPHTHALATE (PBT) 40% GLASS FIBER MINERAL REINFORCED LOW WARPAGE MOLDING COMPOUND  TO BE USED WITH FORD WSS-M99P1111-A  《低翘曲的40%玻璃纤维 矿物增强的聚对苯.pdf FORD WSK-M4D625-A-2010 POLYBUTHYLENE TEREPHTHALATE (PBT) 40% GLASS FIBER MINERAL REINFORCED LOW WARPAGE MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《低翘曲的40%玻璃纤维 矿物增强的聚对苯.pdf
  • FORD WSK-M4D626-A1-2010 POLYARYLATE (ARP) MOLDING COMPOUND HIGH HEAT RESISTANT SE  TO BE USED WITH FORD WSS-M99P1111-A  《抗高温自熄型聚芳酯(ARP)模塑材料  与福特WSS-M99P1111-A  一起使用》.pdf FORD WSK-M4D626-A1-2010 POLYARYLATE (ARP) MOLDING COMPOUND HIGH HEAT RESISTANT SE TO BE USED WITH FORD WSS-M99P1111-A 《抗高温自熄型聚芳酯(ARP)模塑材料 与福特WSS-M99P1111-A 一起使用》.pdf
  • FORD WSK-M4D626-A2-2010 POLYARYLATE (ARP) MOLDING COMPOUND HIGH HEAT RESISTANT SE INTERIOR  TO BE USED WITH FORD WSS-M99P1111-A  《内部抗高温自熄型聚芳酯(ARP)模塑材料  与福特WSS-M99P1111-A  一起使用》.pdf FORD WSK-M4D626-A2-2010 POLYARYLATE (ARP) MOLDING COMPOUND HIGH HEAT RESISTANT SE INTERIOR TO BE USED WITH FORD WSS-M99P1111-A 《内部抗高温自熄型聚芳酯(ARP)模塑材料 与福特WSS-M99P1111-A 一起使用》.pdf
  • FORD WSK-M4D630-A-2008 ABS MOLDING COMPOUND HIGH IMPACT INTERIOR  TO BE USED WITH FORD WSS-M99P1111-A  《内部用耐高冲击丙烯腈-丁二烯-苯乙烯模塑料(和FORD WSS-M99P1111-A一起使用)(使用 FORD WSK-M4D827-A FORD WS.pdf FORD WSK-M4D630-A-2008 ABS MOLDING COMPOUND HIGH IMPACT INTERIOR TO BE USED WITH FORD WSS-M99P1111-A 《内部用耐高冲击丙烯腈-丁二烯-苯乙烯模塑料(和FORD WSS-M99P1111-A一起使用)(使用 FORD WSK-M4D827-A FORD WS.pdf
  • FORD WSK-M4D631-A-2008 ABS MOLDING COMPOUND HIGH COLD IMPACT INTERIOR  TO BE USED WITH FORD WSS-M99P1111-A  《耐高冷冲击丙烯腈-丁二烯-苯乙烯模塑料(和FORD WSS-M99P1111-A一起使用)(使用 FORD WSK-M4D827-A FORD.pdf FORD WSK-M4D631-A-2008 ABS MOLDING COMPOUND HIGH COLD IMPACT INTERIOR TO BE USED WITH FORD WSS-M99P1111-A 《耐高冷冲击丙烯腈-丁二烯-苯乙烯模塑料(和FORD WSS-M99P1111-A一起使用)(使用 FORD WSK-M4D827-A FORD.pdf
  • FORD WSK-M4D632-A2-2005 POLYTETRAFLUOROETHYLENE (PTFE) PASTE EXTRUSION COMPOUND  TO BE USED WITH FORD WSS-M99P1111-A  《聚四氟乙烯(PTFE)糊料挤塑成型料  与标准FORD WSS-M99P1111-A一起使用 》.pdf FORD WSK-M4D632-A2-2005 POLYTETRAFLUOROETHYLENE (PTFE) PASTE EXTRUSION COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《聚四氟乙烯(PTFE)糊料挤塑成型料 与标准FORD WSS-M99P1111-A一起使用 》.pdf
  • 相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > 其他

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1