1、SAE Technical Standards Board Rules provide that: “This report is published by SAE to advance the state of technical and engineering sciences. The use of this report is entirely voluntary, and its applicability and suitability for any particular use, including any patent infringement arising theref
2、rom, is the sole responsibility of the user.” SAE reviews each technical report at least every five years at which time it may be revised, reaffirmed, stabilized, or cancelled. SAE invites your written comments and suggestions.Copyright 2013 SAE International All rights reserved. No part of this pub
3、lication may be reproduced, stored in a retrieval system or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of SAE. TO PLACE A DOCUMENT ORDER: Tel: 877-606-7323 (inside USA and Canada) Tel: +1 724-776-4970
4、outside USA) Fax: 724-776-0790 Email: CustomerServicesae.org SAE WEB ADDRESS: http:/www.sae.orgSAE values your input. To provide feedback on this Technical Report, please visit http:/www.sae.org/technical/standards/ARP618AAEROSPACERECOMMENDEDPRACTICEARP618 REV. A Issued 1975-01 Revised 1988-01 Reaf
5、firmed 2013-01 Superseding ARP618 Boss Fittings, Metal Seal, Fluid Systems: General Requirements For RATIONALEARP618A has been reaffirmed to comply with the SAE five-year review policy. SAE ARP618A Page 2 of 11 SAE ARP618A Page 3 of 11 SAE ARP618A Page 4 of 11 SAE ARP618A Page 5 of 11 SAE ARP618A Page 6 of 11 SAE ARP618A Page 7 of 11 SAE ARP618A Page 8 of 11 SAE ARP618A Page 9 of 11 SAE ARP618A Page 10 of 11 SAE ARP618A Page 11 of 11
