1、SAE Technical Standards Board Rules provide that: “This report is published by SAE to advance the state of technical and engineering sciences. The use of this report is entirelyvoluntary, and its applicability and suitability for any particular use, including any patent infringement arising therefro
2、m, is the sole responsibility of the user.”SAE reviews each technical report at least every five years at which time it may be reaffirmed, revised, or cancelled. SAE invites your written comments and suggestions.Copyright 2003 Society of Automotive Engineers, Inc.All rights reserved. No part of this
3、 publication may be reproduced, stored in a retrieval system or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of SAE.TO PLACE A DOCUMENT ORDER: Tel: 877-606-7323 (inside USA and Canada)Tel: 724-776-4970 (
4、outside USA)Fax: 724-776-0790Email: custsvcsae.orgSAE WEB ADDRESS: http:/www.sae.orgAEROSPACE STANDARDAS1424SUP1REV.AIssued 1996-05Reaffirmed 2001-12Revised 2003-01Superseding AS1424SUP1(R) Hose Assemblies, Metal, Medium Pressure, High Temperature(Supplement 1)1. SCOPE:This supplement forms a part o
5、f Aerospace Standard AS1424, Hose Assemblies, Metal, Medium Pressure, High Temperature, and shall be used to identify hose assembly part standards citing this procurement specification.2. APPLICABLE DOCUMENTS:The following publications form a part of this document to the extent specified herein. The
6、 latest issue of SAE publications shall apply. The applicable issue of other publications shall be the issue in effect on the date of the purchase order. In the event of conflict between this document and references cited herein, the text of this document takes precedence. Nothing in this document,
7、however, supersedes applicable laws and regulations unless a specific exemption has been obtained.2.1 SAE Publications:Available from SAE, 400 Commonwealth Drive, Warrendale, PA 15096-0001.AS136 Hose Assembly, Metal, Medium Pressure, Flareless, Welded, Straight to StraightAS137 Hose Assembly, Metal,
8、 Medium Pressure, Flareless, Welded, Straight to 45AS138 Hose Assembly, Metal, Medium Pressure, Flareless, Welded, Straight to 90AS139 Hose Assembly, Metal, Medium Pressure, Flareless, Welded, 45 to 45AS140 Hose Assembly, Metal, Medium Pressure, Flareless, Welded, 45 to 90AS141 Hose Assembly, Metal,
9、 Medium Pressure, Flareless, Welded, 90 to 90AS5458 Hose Assembly, Metal, Medium Pressure, Flared, Welded, Straight to StraightAS5459 Hose Assembly, Metal, Medium Pressure, Flared, Welded, Straight to 45AS5460 Hose Assembly, Metal, Medium Pressure, Flared, Welded, Straight to 90AS5461 Hose Assembly,
10、 Metal, Medium Pressure, Flared, Welded, 45 to 45AS5462 Hose Assembly, Metal, Medium Pressure, Flared, Welded, 45 to 90AS5463 Hose Assembly, Metal, Medium Pressure, Flared, Welded, 90 to 90Copyright SAE International Provided by IHS under license with SAENot for ResaleNo reproduction or networking p
11、ermitted without license from IHS-,-SAE AS1424SUP1 Revision A- 2 -3. NOTES:3.1 The change bar ( l ) located in the left margin is for the convenience of the user in locating areas where technical revisions, not editorial changes, have been made to the previous issue of this document. An (R) symbol t
12、o the left of the document title indicates a complete revision of the document.PREPARED UNDER THE JURISDICTION OFSAE SUBCOMMITTEE G-3D, AEROSPACE HOSE OFCOMMITTEE G-3, AEROSPACE COUPLINGS, FITTINGS, HOSE, AND TUBING ASSEMBLIESCopyright SAE International Provided by IHS under license with SAENot for ResaleNo reproduction or networking permitted without license from IHS-,-
