JUS G C6 507-1991 Plastics Unplasticized polyvinyl chloride (PVC) pipes and fittings for buried drain and sewer pipes Dimensions Pratice and techniques for instalation and testing《.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD WSB-M4D747-A-2010 POLYPHENYLENE ETHER (PPE) MODIFIED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《聚苯醚（PPE）改性成型料 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD WSB-M4D766-A-2010 POLYETHYLENE TEREPHTHALATE (PET) 35% GLASS FIBER REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《35%玻璃纤维增强模塑材料聚乙烯对苯二甲酸酯 与福特WSS-M99P1111-A.pdf

FORD WSB-M4D780-A-2010 POLYVINYL CHLORIDE (PVC) FLEXIBLE 87 DUROMETER A HARDNESS MOLDING COMPOUND EXTERIOR PAINTABLE TO BE USED WITH FORD WSS-M99P1111-A 《汽车外部用可印刷的硬度为87 A的聚氯乙烯(PV.pdf

FORD WSB-M4D780-A2-2010 POLYVINYL CHLORIDE (PVC) FLEXIBLE 65 DUROMETER A HARDNESS MOLDING COMPOUND EXTERIOR PAINTABLE TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD WSB-M4D78.pdf

FORD WSB-M4D812-A-2006 POLYPROPYLENE (PP) COPOLYMER MOLDING COMPOUND INTERIOR TO BE USED WITH FORD WSS-M99P1111-A (Use WSS-M4d812-A)《汽车内部用聚丙烯(PP)共聚物成型料 与标准FORD WSS-M99P1111-A一起使.pdf

FORD WSB-M4D813-A-2012 POLYCARBONATE + ABS BLEND (PC+ABS) HIGH IMPACT PLATING GRADE MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSB-M4D815-A1-2006 POLYPROPYLENE (PP) FOAM CLOSED CELL LOW DENSITY TO BE USED WITH FORD WSS-M99P1111-A 《低密度闭孔聚丙烯（PP）泡沫 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD WSB-M4D815-A2-2006 POLYPROPYLENE (PP) FOAM CLOSED CELL MEDIUM DENSITY TO BE USED WITH FORD WSS-M99P1111-A (Shown on WSB-M4D815-A1)《中等密度闭孔聚丙烯(PP)泡沫 与标准FORD WSS-M99P1111-A一起使.pdf

FORD WSB-M4D815-A3-2006 POLYPROPYLENE (PP) FOAM CLOSED CELL HIGH DENSITY TO BE USED WITH FORD WSS-M99P1111-A (Shown on WSB-M4D815-A1)《高密度闭孔聚丙烯(PP)泡沫 与标准FORD WSS-M99P1111-A一起使用 .pdf