1、 AEROSPACE STANDARD CABLE, SAFETY, NICKEL ALLOY, CORROSION RESISTANT (UNS N06625) AS3655Copyright 2014 SAE International All rights reserved. No part of this publication may be reproduced, stored in a retrieval system or transmitted, in any form or by any means, electronic, mechanical, photocopying,
2、 recording, or otherwise, without the prior written permission of SAE. TO PLACE A DOCUMENT ORDER: Tel: 877-606-7323 (inside USA and Canada) Tel: +1 724-776-4970 (outside USA) Fax: 724-776-0790 Email: CustomerServicesae.org SAE WEB ADDRESS: http:/www.sae.org ISSUED 2009-05REAFFIRMED2014-04THIRD ANGLE
3、 PROJECTION CUSTODIAN: E-25 FEDERAL SUPPLY CLASS 5342 AS3655 SHEET 1 OF 3 PROCUREMENT SPECIFICATION: AS4536SAE Technical Standards Board Rules provide that: “This report ispublishedby SAE toadvance thestate of technicalandengineeringsciences.The useofthis reportisentirelyvoluntary, andits applicabil
4、ity and suitability forany particular use,including any patent infringement arising therefrom, isthe soleresponsibilityofthe user.”SAE reviews eachtechnicalreport at least every five years at which time itmay berevised,reaffirmed, stabilized, orcancelled. SAE invites yourwrittencomments andsuggestio
5、ns. SAE values your input. To provide feedbackon this Technical Report, please visit http:/www.sae.org/technical/standards/AS3655 RATIONALE AS3655 HAS BEEN REAFFIRMED TO COMPLY WITH THE SAE FIVE-YEAR REVIEW POLICY. FIGURE 1 SAFETY CABLE-END FITTING AND CABLE FIGURE 2 FERRULE CABLE END FITTING CRIMPE
6、D ONTO CABLE TO WITHSTAND PULL-OFF LOAD IN TABLE 1B, SEE NOTE /4/ LENGTH OF CABLE /6/AEROSPACE STANDARD AS3655 SHEET 2 OF 3 CABLE, SAFETY, NICKEL ALLOY, CORROSION RESISTANT (UNS N06625) TABLE 1A DIMENSIONS A-D PART NUMBER /11/ A /5/ INCH (mm) B MAX INCH (mm) C MAX INCH (mm) D INCH (mm) AS3655-01XXX
7、AS3655-02XXX AS3655-03XXX AS3655-04XXX .022-.026 (0.56-0.66) .032-.038 (0.81-0.97) .040-.046 (1.02-1.17) .062-.072 (1.57-1.83) .135 (3.43) .135 (3.43) .135 (3.43) .190 (4.83) .085 (2.16) .125 (3.18) .125 (3.18) .155 (3.94) .029-.032 (0.74-0.81) .043-.049 (1.09-1.24) .051-.057 (1.30-1.45) .077-.083 (
8、1.96-2.11) TABLE 1B DIMENSIONS E-F PART NUMBER /11/ E INCH (mm) F INCH (mm) CABLE TYPE MINIMUM PULL-OFF LOAD POUND (NEWTON) AS3655-01XXX AS3655-02XXX AS3655-03XXX AS3655-04XXX .089-.091 (2.26-2.31) .104-.106 (2.64-2.69) .104-.106 (2.64-2.69) .149-.151 (3.78-3.84) .087-.095 (2.21-2.41) .156-.164 (3.9
9、6-4.17) .156-.164 (3.96-4.17) .245-.255 (6.22-6.48) STRAND 1X7 CABLE 3X7 CABLE 7X7 CABLE 7X19 30 (133.4) 70 (311.4) 110 (489.3) 280 (1245.5) NOTES: 1. MATERIAL: CABLE, END FITTING, AND FERRULE AMS5666, CORROSION RESISTANT NICKEL ALLOY (UNS N06625 CRES WIRE) CHEMICAL COMPOSITION ONLY. 2. PROCUREMENT
10、SPECIFICATION: AS4536 3. INSTALLATION IN ACCORDANCE WITH AS4536 and AS567. /4/ CABLE END FITTING SHAPE OPTIONAL, HOWEVER, MUST BE WITHIN SPECIFIED ENVELOPE. /5/ CUT END OF CABLE OR STRAND SHALL BE FUSED TO PREVENT UNRAVELING AND CAN BE UP TO .006 in (0.1524mm) ABOVE ACTUAL MEASURED DIAMETER. HOWEVER
11、 THE MAXIMUM FUSED END DIAMETER SHALL NOT EXCEED .028 (0.71), .042 (1.07), .050 (1.27), OR .076 (1.93) FOR SIZE CODES -01XXX, -02XXX, -03XXX, OR -04XXX RESPECTIVELY. /6/ LENGTH OF CABLE SHALL BE 3.0 in (76.2 mm) INCREMENTS; MINIMUM LENGTH AT 6.0 in (152.4 mm), MAXIMUM LENGTH AT 24.0 in (609.6 mm),
12、50 (12.7 mm). 7. MARK PART NUMBER AND MANUFACTURER IDENTIFICATION PER AS478 CLASS N. 8. DIMENSIONING AND TOLERANCING PER ASME Y14.5M-1994. 9. DIMENSIONS ARE IN INCHES, MILLIMETERS ARE IN PARENTHESIS. /10/ PULL-OFF LOAD IS IN POUND-FORCE, NEWTONS ARE IN PARENTHESIS. AEROSPACE STANDARD AS3655 SHEET 3
13、 OF 3 CABLE, SAFETY, NICKEL ALLOY, CORROSION RESISTANT (UNS N06625) /11/ EXAMPLE OF KIT PART NUMBER: FOR .032 in (0.8128 mm) NOMINAL DIAMETER SAFETY CABLE AND FERRULE, 9.0 in (228.6 mm) LONG CABLE AND FERRULE (SEE NOTE 12 AND 16). EXAMPLE OF A SAFETY CABLE PART NUMBER: FOR .032 in (0.8128 mm) NOMINA
14、L DIAMETER SAFETY CABLE 9.0 in (228.6 mm) LONG. EXAMPLE OF A FERRULE PART NUMBER: FOR .032 in (0.8128 mm) NOMINAL DIAMETER SAFETY CABLE. 12. DO NOT USE UNASSIGNED PART NUMBERS. 13. AS AND AMS ARE SAE PUBLICATIONS. 14. ASME Y14.5M-1994 IS AN AMERICAN SOCIETY OF MECHANICAL ENGINEERS PUBLICATION. 15. P
15、RODUCTS SUPPLIED TO THIS SPECIFICATION SHALL BE PACKAGED IN ACCORDANCE WITH AS4536. AS3655 02 09 C IDENTIFIES ITEM AS A SAFETY CABLE (NO FERRULE) DOCUMENT NUMBER 9.0 in (228.6 mm) LENGTH OF CABLE AS3655 02 09 K IDENTIFIES ITEM AS A KIT (SAFETY CABLE AND FERRULE) 9.0 in (228.6 mm) LENGTH OF CABLE SAFETY CABLE ASSEMBLY A PER TABLE 1A & 1B DOCUMENT NUMBER SAFETY CABLE ASSEMBLY A PER TABLE 1A & 1BAS3655 02 F IDENTIFIES ITEM AS A SAFETY CABLE FERRULE (NO CABLE) SAFETY CABLE ASSEMBLY A PER TABLE 1A & 1BDOCUMENT NUMBER
