1、AEROSPACE STANDARD (R) CONTACTS, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE (FOR MIL-DTL-28748/3AND MIL-DTL-28748/13 CONNECTORS) AS39029/35Copyright 2010 SAE International All rights reserved. No part of this publication may be reproduced, stored in a retrieval system or transmitted, in any form
2、or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of SAE. TO PLACE A DOCUMENT ORDER: Tel: 877-606-7323 (inside USA and Canada) Tel: +1 724-776-4970 (outside USA) Fax: 724-776-0790 Email: CustomerServicesae.org SAE WEB ADDRESS: http:/
3、www.sae.org ISSUED 2000-07REAFFIRMED 2007-06 REVISED 2010-12THIRD ANGLE PROJECTION CUSTODIAN: AE-8/AE-8C1 REV.BFEDERAL SUPPLY CLASS 5999 AS39029/35SHEET 1 OF 3REV. BPROCUREMENT SPECIFICATION: AS39029SAE Technical Standards Board Rules provide that: “This report ispublishedby SAE toadvance thestate o
4、f technicalandengineering sciences. Theuse ofthis report is entirely voluntary, andits applicability and suitability forany particular use,including any patent infringement arising therefrom, isthe soleresponsibilityofthe user.”SAE reviews eachtechnicalreport at least every five years at which time
5、itmay bereaffirmed, revised, orcancelled. SAE invites yourwrittencomments andsuggestions. SAE values your input. To provide feedbackon this Technical Report, please visit http:/www.sae.org/technical/standards/AS39029/35BRATIONALE REVISE TO INCORPORATE THE OUTSTANDING AMENDMENT AS REQUIRED BY SAE GUI
6、DELINES AND UPDATE FORMAT, FIGURES AND TABLES. NOTICE THE REQUIREMENTS FOR PROCURING THE PRODUCT DESCRIBED HEREIN SHALL CONSIST OF THIS SPECIFICATION SHEET AND THE LATEST ISSUE OF SAE AS39029. FIGURE 1 - AS39029/35 SOCKET CONTACT Copyright SAE International Provided by IHS under license with SAENot
7、for ResaleNo reproduction or networking permitted without license from IHS-,-,-AEROSPACE STANDARD AS39029/35SHEET 2 OF 3REV. B(R) CONTACTS, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE (FOR MIL-DTL-28748/3 AND MIL-DTL-28748/13 CONNECTORS) TABLE 1A - CONTACT DIMENSIONS BINCODE ADIABDIACDIADDIAEDIAFD
8、IAGDIA MAXHDIA MIN 274.121.119.070.067.048.044.079.076.119MAX.135MAX.101.0415 275.064276.095.092.070.066.112.109441.077.074.057.054.037.034.070.067.077.074.078 MAX.061 .032 TABLE 1B CONTACT DIMENSIONS (CONTINUED) BINCODE I J K L M N P R SDIA 1/274.096.090.312.282.695.675.771.757.075.055.265.245.545.
9、525.510.490.034.028275276441.050.044.195.175.426.406.464.444.045.025.145.125.350.330.288.268.023.0171/ HOLE ONE WALL LOCATED ON C AXIS WITHIN .008 INCHES. TABLE 2 - MARKING AND DESIGN CHARACTERISTICS BIN CODE COLOR BANDS MATING ENDSIZEWIREBARREL SIZETYPE CLASS1ST2ND3RD274 RED VIOLET YELLOW 20 20 A A
10、 275 RED VIOLET GREEN 16 20 276 RED VIOLET BLUE 16 16 441 YELLOW YELLOW BROWN 22 22 TABLE 3 - TOOL REQUIREMENTS BINCODE BASICCRIMPING TOOL POSITIONER INSTALLINGTOOL REMOVAL TOOL 274 M22520/1-01 M22520/1-03 REDM81969/18-01 M81969/20-01 275 M22520/1-01 M22520/1-03 BLUEM81969/18-01 M81969/20-01 276 M22
11、520/1-01 M22520/1-03 BLUEM81969/18-01 M81969/20-01 441 M22520/2-01 K280 1/ OR 640092 2/OR EQUIVALENT M81969/18-02 M81969/20-02 1/ DANIELS MANUFACTURING CORPORATION PART NUMBER 2/ ASTRO TOOL CORPORATION PART NUMBER Copyright SAE International Provided by IHS under license with SAENot for ResaleNo rep
12、roduction or networking permitted without license from IHS-,-,-AEROSPACE STANDARD AS39029/35SHEET 3 OF 3REV. B(R) CONTACTS, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE (FOR MIL-DTL-28748/3 AND MIL-DTL-28748/13 CONNECTORS) TABLE 4 - PART NUMBERS AS39029 PART NUMBER BINCODE SUPERSEDEDPART NUMBER(S)
13、M39029/35-274 274 MS17804-20-20 M39029/35-275 275 MS17804-16-20M39029/35-276 276 MS17804-16-16 M39029/35-441 441 M39029/35-22-22 REQUIREMENTS: ALL REQUIREMENTS SHALL CONSIST OF THIS SPECIFICATION AND THE LATEST ISSUE OF AS39029. 1. DESIGN: CONTACT SHALL BE DESIGNED IN ACCORDANCE WITH FIGURE 1, TABLE
14、 1 AND 2. WALL THICKNESS OF ANY PART OF THE CONTACT SHALL NOT BE LESS THAN 0.010 (0.25 MM). DIMENSIONS ARE IN INCHES AND SHOWN AFTER PLATING. 2. TOOLS: TOOLS REQUIRED FOR CRIMPING CONTACTS TO WIRE/CABLE AND THE INSTALLING/REMOVAL FROM THE CONNECTOR SHALL BE IN ACCORDANCE WITH TABLE 3. 3. PART NUMBER
15、S: CONTACT PART NUMBERS SHALL BE IN ACCORDANCE WITH TABLE 4. SUPERSEDED PART NUMBERS ARE AS SPECIFIED. 4. MATERIALS: MATERIALS SHALL BE IN ACCORDANCE WITH AS39029. 5. MECHANICAL: MECHANICAL PROPERTIES SHALL BE IN ACCORDANCE WITH AS39029. 6. ELECTRICAL: ELECTRICAL PROPERTIES SHALL BE IN ACCORDANCE WI
16、TH AS39029. 7. ENVIRONMENTAL: ENVIRONMENTAL PROPERTIES SHALL BE IN ACCORDANCE WITH AS39029. VIBRATION IS TEST CONDITION II. SHOCK IS TEST CONDITION I. APPLICATION NOTES 1. THE AS39029/35 SOCKET CONTACT MATES DIRECTLY WITH AN AS39029/34 PIN AS SHOWN IN TABLE 5. TABLE 5 - CONTACT MATING PART NUMBERS A
17、S39029/35 BIN CODE MATING AS39029/34 BIN CODE 274 271 275 272 276 273 441 440 SPECIFICATION NOTES A CHANGE BAR (|) LOCATED IN THE LEFT MARGIN IS FOR THE CONVENIENCE OF THE USER IN LOCATING AREAS WHERE TECHNICAL REVISIONS, NOT EDITORIAL CHANGES HAVE BEEN MADE TO THE PREVIOUS ISSUE OF THIS DOCUMENT. A
18、N (R) SYMBOL TO THE LEFT OF THE DOCUMENT TITLE INDICATES A COMPLETE REVISION OF THE DOCUMENT, INCLUDING TECHNICAL REVISIONS. CHANGE BARS AND (R) ARE NOT USED IN ORIGINAL PUBLICATIONS NOR IN DOCUMENTS THAT CONTAIN EDITORIAL CHANGES ONLY. Copyright SAE International Provided by IHS under license with SAENot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
