1、SAE Technical Standards Board Rules provide that: “This report is published by SAE to advance the state of technical and engineering sciences. The use of this report is entirely voluntary, and its applicability and suitability for any particular use, including any patent infringement arising theref
2、rom, is the sole responsibility of the user.” SAE reviews each technical report at least every five years at which time it may be revised, reaffirmed, stabilized, or cancelled. SAE invites your written comments and suggestions.Copyright 2013 SAE International All rights reserved. No part of this pub
3、lication may be reproduced, stored in a retrieval system or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of SAE. TO PLACE A DOCUMENT ORDER: Tel: 877-606-7323 (inside USA and Canada) Tel: +1 724-776-4970
4、outside USA) Fax: 724-776-0790 Email: CustomerServicesae.org SAE WEB ADDRESS: http:/www.sae.orgSAE values your input. To provide feedback on this Technical Report, please visit http:/www.sae.org/technical/standards/AS4401AEROSPACESTANDARDAS4401 Issued 1996-08 Reaffirmed 2013-01 Separable Fittings,
5、Permanent Fittings, Tubing, Fluid Systems 8000 psi Qualification Test Standard For RATIONALEAS4401 has been reaffirmed to comply with the SAE five-year review policy. SAE AS4401 Page 2 of 38 SAE AS4401 Page 3 of 38 SAE AS4401 Page 4 of 38 SAE AS4401 Page 5 of 38 SAE AS4401 Page 6 of 38 SAE AS4401 Pa
6、ge 7 of 38 SAE AS4401 Page 8 of 38 SAE AS4401 Page 9 of 38 SAE AS4401 Page 10 of 38 SAE AS4401 Page 11 of 38 SAE AS4401 Page 12 of 38 SAE AS4401 Page 13 of 38 SAE AS4401 Page 14 of 38 SAE AS4401 Page 15 of 38 SAE AS4401 Page 16 of 38 SAE AS4401 Page 17 of 38 SAE AS4401 Page 18 of 38 SAE AS4401 Page 19 of 38 SAE AS4401 Page 20 of 38 SAE AS4401 Page 21 of 38 SAE AS4401 Page 22 of 38 SAE AS4401 Page 23 of 38 SAE AS4401 Page 24 of 38 SAE AS4401 Page 25 of 38 SAE AS4401 Page 26 of 38 SAE AS4401 Page 27 of 38 SAE AS4401 Page 28 of 38 SAE AS4401 Page 29 of 38 SAE AS4401 Page 30 of 38
