1、SAE Technical Standards Board Rules provide that: “This report is published by SAE to advance the state of technical and engineering sciences. The use of this report is entirely voluntary, and its applicability and suitability for any particular use, including any patent infringement arising theref
2、rom, is the sole responsibility of the user.” SAE reviews each technical report at least every five years at which time it may be revised, reaffirmed, stabilized, or cancelled. SAE invites your written comments and suggestions.Copyright 2012 SAE International All rights reserved. No part of this pub
3、lication may be reproduced, stored in a retrieval system or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of SAE. TO PLACE A DOCUMENT ORDER: Tel: 877-606-7323 (inside USA and Canada) Tel: +1 724-776-4970
4、outside USA) Fax: 724-776-0790 Email: CustomerServicesae.org SAE WEB ADDRESS: http:/www.sae.orgSAE values your input. To provide feedback on this Technical Report, please visit http:/www.sae.org/technical/standards/AS5054AAEROSPACESTANDARDAS5054 REV. A Issued 1998-11 Revised 2005-06 Reaffirmed 2012
5、11 Superseding AS5054 Areas for Calculating Stress or Load Values for Externally and Internally Threaded Fasteners RATIONALEAS5054A has been reaffirmed to comply with the SAE five-year review policy. SAE AS5054A Page 2 of 8 SAE AS5054A Page 3 of 8 SAE AS5054A Page 4 of 8 SAE AS5054A Page 5 of 8 SAE AS5054A Page 6 of 8 SAE AS5054A Page 7 of 8 SAE AS5054A Page 8 of 8
