1、AEROSPACE STANDARD HOSE ASSEMBLY, LINED SILICONE, HEATED, FLARELESS TO FIXED CAVITY, 125 PSI, POTABLE WATER AS5423Copyright 2013 SAE International All rights reserved. No part of this publication may be reproduced, stored in a retrieval system or transmitted, in any form or by any means, electronic,
2、 mechanical, photocopying, recording, or otherwise, without the prior written permission of SAE. TO PLACE A DOCUMENT ORDER: Tel: 877-606-7323 (inside USA and Canada) Tel: +1 724-776-4970 (outside USA) Fax: 724-776-0790 Email: CustomerServicesae.org SAE WEB ADDRESS: http:/www.sae.org ISSUED 2000-07RE
3、AFFIRMED 2013-01 REVISED 2013-09THIRD ANGLE PROJECTION CUSTODIAN: G-3/G-3D REV.BFEDERAL SUPPLY CLASS 4720 AS5423SHEET 1 OF 13REV. BPROCUREMENT SPECIFICATION: AS5420 /2/SAE Technical Standards Board Rules provide that: “This report ispublishedby SAE toadvance thestate of technicalandengineering scien
4、ces. Theuse ofthis report is entirely voluntary, andits applicability and suitability forany particular use,including any patent infringement arising therefrom, isthe soleresponsibilityofthe user.”SAE reviews eachtechnicalreport at least every five years at which time itmay berevised, reaffirmed, st
5、abilized, orcancelled. SAE invites yourwrittencomments andsuggestions. SAE values your input. To provide feedbackon this Technical Report, please visit http:/www.sae.org/technical/standards/AS5423BRATIONALE REACH DIMENSIONS C1 AND F1 WERE REVISED FROM “MIN” TO “MAX” BECAUSE THIS IS MAXIMUM LENGTH OF
6、 THE FITTING. A TOLERANCE WAS ADDED TO THE LEADWIRE LENGTH. FIGURE 1 - STYLE A1 FIGURE 2 - STYLE A2 FIGURE 3 - STYLE B1 FIGURE 4 - STYLE B2 AEROSPACE STANDARD AS5423SHEET 2 OF 13REV. BHOSE ASSEMBLY, LINED SILICONE, HEATED, FLARELESS TO FIXED CAVITY, 125 PSI, POTABLE WATER FIGURE 5 - STYLE C1 FIGURE
7、6 - STYLE C2 FIGURE 7 - STYLE D1 FIGURE 8 - STYLE D2 FIGURE 9 - STYLE E1 AEROSPACE STANDARD AS5423SHEET 3 OF 13REV. BHOSE ASSEMBLY, LINED SILICONE, HEATED, FLARELESS TO FIXED CAVITY, 125 PSI, POTABLE WATER FIGURE 10 - STYLE E2 FIGURE 11 - STYLE F1 FIGURE 12 - STYLE F2 FIGURE 13 - STYLE G1 AEROSPACE
8、STANDARD AS5423SHEET 4 OF 13REV. BHOSE ASSEMBLY, LINED SILICONE, HEATED, FLARELESS TO FIXED CAVITY, 125 PSI, POTABLE WATER FIGURE 14 - STYLE G2 FIGURE 15 - STYLE H1 FIGURE 16 - STYLE H2 FIGURE 17 - STYLE J1 FIGURE 18 - STYLE J2 AEROSPACE STANDARD AS5423SHEET 5 OF 13REV. BHOSE ASSEMBLY, LINED SILICON
9、E, HEATED, FLARELESS TO FIXED CAVITY, 125 PSI, POTABLE WATER FIGURE 19 - STYLE K1 FIGURE 20 - STYLE K2 FIGURE 21 - STYLE L1 FIGURE 22 - STYLE L2 AEROSPACE STANDARD AS5423SHEET 6 OF 13REV. BHOSE ASSEMBLY, LINED SILICONE, HEATED, FLARELESS TO FIXED CAVITY, 125 PSI, POTABLE WATER FIGURE 23 - STYLE M1 F
10、IGURE 24 - STYLE M2 FIGURE 25 - STYLE N1 FIGURE 26 - STYLE N2 AEROSPACE STANDARD AS5423SHEET 7 OF 13REV. BHOSE ASSEMBLY, LINED SILICONE, HEATED, FLARELESS TO FIXED CAVITY, 125 PSI, POTABLE WATER FIGURE 27 - STYLE P1 FIGURE 28 - STYLE P2 FIGURE 29 - STYLE R1 FIGURE 30 - STYLE R2 FIGURE 31 - STYLE S1
11、AEROSPACE STANDARD AS5423SHEET 8 OF 13REV. BHOSE ASSEMBLY, LINED SILICONE, HEATED, FLARELESS TO FIXED CAVITY, 125 PSI, POTABLE WATER FIGURE 32 - STYLE S2 FIGURE 33 - STYLE T1 FIGURE 34 - STYLE T2 FIGURE 35 - STYLE U1 AEROSPACE STANDARD AS5423SHEET 9 OF 13REV. BHOSE ASSEMBLY, LINED SILICONE, HEATED,
12、FLARELESS TO FIXED CAVITY, 125 PSI, POTABLE WATER FIGURE 36 - STYLE U2 FIGURE 37 - STYLE V1 FIGURE 38 - STYLE V2 FIGURE 39 - STYLE W1 AEROSPACE STANDARD AS5423SHEET 10 OF 13REV. BHOSE ASSEMBLY, LINED SILICONE, HEATED, FLARELESS TO FIXED CAVITY, 125 PSI, POTABLE WATER FIGURE 40 - STYLE W2 FIGURE 41 -
13、 HOSE AND THERMOSTAT DATA TABLE 1A - FITTING DIMENSIONS A1-H2 HOSE ASSY SIZE LETTERSIZE CODEA1MAXA2MAXB1MAXB2MAXC1MAXC2MAXD1MAXD2MAXE1MAXE2MAXF1MAXF2MAXG1MAXG2MAXH1MAXH2MAX-08 H 1.28 2.46 1.32 2.52 1.73 2.92 1.39 2.58 1.58 2.80 1.81 3.00 1.39 2.58 1.63 2.83 -10 J 1.37 2.56 1.32 2.52 1.85 3.04 1.57 2
14、.76 1.58 2.80 1.93 3.12 1.57 2.76 1.82 3.01 -12 K 1.53 2.71 1.53 2.72 2.36 3.54 2.05 3.23 1.82 3.03 2.45 3.64 2.05 3.23 2.19 3.37 -16 M 1.57 2.75 1.58 2.76 2.48 3.66 2.17 3.35 1.90 3.11 2.60 3.78 2.17 3.35 2.41 3.59 TABLE 1B - FITTING DIMENSIONS J1-W HOSEASSY SIZE LETTERSIZE CODEJ1 MAXJ2 MAXK1MAXK2M
15、AXL1MAXL2MAXM1MAXM2MAXMTHRU REFN.030 P.030 R.030 S.030 T.030 U.030 V.030 W.030 -08 H 1.39 2.58 1.52 2.69 1.82 3.11 1.39 2.58 .430 .622 1.153 .702 1.266 .526 1.018 .702 1.267 -10 J 1.58 2.76 1.61 2.77 2.02 3.36 1.57 2.76 .555 .648 1.284 .728 1.397 .622 1.246 .818 1.524 -12 K 2.05 3.23 1.87 3.02 2.54
16、3.87 2.05 3.23 .660 .815 1.647 .910 1.782 .646 1.409 .994 1.900 -16 M 2.18 3.35 1.91 3.06 2.63 3.96 2.17 3.35 .915 .882 1.817 1.002 1.986 .817 1.724 1.030 2.025 TABLE 2A - FITTING DEDUCT LENGTHS AND NOMINAL WEIGHTS (REF) FIGURES 1-16 /8/ HOSE ASSY SIZE FIGURE 1 & 2 DED LG FIGURE 1 & 2 FTG WT FIGURE
17、3 & 4 DED LG FIGURE 3 & 4 FTG WT FIGURE 5 & 6 DED LG FIGURE5 & 6 FTG WT FIGURE7 & 8 DED LG FIGURE7 & 8 FTG WT FIGURE9 & 10 DED LG FIGURE9 & 10 FTG WT FIGURE11 & 12 DED LG FIGURE 11 & 12 FTG WT FIGURE 13 & 14 DED LG FIGURE13 & 14 FTG WT FIGURE15 & 16 DED LG FIGURE15 & 16 FTG WT -08 1.45 .269 1.86 .28
18、4 1.52 .289 1.71 .286 1.94 .297 1.52 .302 1.81 .277 1.57 .282 -10 1.55 .321 2.07 .346 1.80 .354 1.81 .341 2.15 .360 1.80 .368 2.00 .339 1.75 .348 -12 1.59 .488 2.42 .526 2.10 .539 1.88 .515 2.51 .544 2.10 .558 2.26 .504 2.11 .518 -16 1.68 .625 2.58 .676 2.27 .696 2.00 .653 2.69 .695 2.27 .715 2.53 .
19、668 2.29 .688 AEROSPACE STANDARD AS5423SHEET 11 OF 13REV. BHOSE ASSEMBLY, LINED SILICONE, HEATED, FLARELESS TO FIXED CAVITY, 125 PSI, POTABLE WATER TABLE 2B - FITTING DEDUCT LENGTHS AND NOMINAL WEIGHTS (REF) FIGURES 17-32 /8/ HOSE ASSY SIZE FIGURE 17 & 18 DED LG FIGURE 17 & 18 FTG WT FIGURE 19 & 20
20、DED LG FIGURE 19 & 20 FTG WT FIGURE 21 & 22 DED LG FIGURE21 & 22 FTG WT FIGURE23 & 24 DED LG FIGURE23 & 24 FTG WT FIGURE25 & 26 DED LG FIGURE25 & 26 FTG WT FIGURE27 & 28 DED LG FIGURE 27 & 28 FTG WT FIGURE 29 & 30 DED LG FIGURE29 & 30 FTG WT FIGURE31 & 32 DED LG FIGURE31 & 32 FTG WT -08 1.70 .232 1.
21、99 .243 1.57 .248 2.10 .295 1.86 .300 1.99 .250 2.28 .261 1.86 .266 -10 1.79 .274 2.19 .298 1.75 .306 2.29 .359 2.04 .368 2.08 .294 2.48 .318 2.04 .326 -12 1.94 .400 2.60 .429 2.11 .443 2.58 .532 2.43 .546 2.26 .428 2.92 .457 2.43 .471 -16 2.03 .510 2.74 .540 2.29 .560 2.88 .699 2.64 .719 2.38 .541
22、3.09 .571 2.64 .591 TABLE 2C - FITTING DEDUCT LENGTHS AND NOMINAL WEIGHTS (REF) FIGURES 33-40 /8/ HOSE ASSY SIZEFIGURE 33 & 34 DEDLGFIGURE33 & 34FTG WT FIGURE35 & 36DEDLGFIGURE35 & 36FTG WT FIGURE37 & 38 DEDLGFIGURE37 & 38 FTG WT FIGURE 39 & 40 DEDLGFIGURE 39 & 40 FTG WT -08 2.08 .248 1.74 .253 2.16
23、 .261 1.74 .266 -10 2.28 .299 2.01 .307 2.36 .313 2.01 .321 -12 2.74 .439 2.42 .452 2.83 .457 2.42 .471 -16 2.90 .563 2.59 .583 3.01 .582 2.59 .602 TABLE 3 - THERMOSTAT DIMENSIONS HOSE ASSY SIZELETTER SIZECODE XMAXYMAXZMAXAAREF -08 H 1.73 1.00 .89 .46 -10 J 1.73 1.15 .97 .46 -12 K 1.90 1.29 1.04 .46
24、 -16 M 1.90 1.54 1.17 .46 TABLE 4 - HOSE DATA HOSE ASSY SIZELETTER SIZECODE IDREF OD MAXNOM WT/IN REF MINBENDRAD-08 H .500 .790 .0115 1.50 -10 J .625 .940 .0153 1.88 -12 K .750 1.070 .0186 2.25 -16 M 1.000 1.320 .0245 3.00 TABLE 5 - HOSE ASSEMBLY LENGTH INCREMENT AND TOLERANCE HOSE ASSEMBLY LENGTH A
25、VAILABLE INCREMENTS TOLERANCE 5 INCHES MIN TO 18 INCHES EXCLUSIVE (NOT LESS THAN) .125 +.125/-.125 18 TO 36 INCHES EXCLUSIVE (NOT LESS THAN) .250 +.250/-.250 36 TO 100 INCHES EXCLUSIVE (NOT LESS THAN) .500 +.375/-.375 100 TO 360 INCHES MAX /7/ (NOT LESS THAN) 1.000 +.5%/-.500 NOTES: 1. MATERIAL AND
26、FINISH: AS5420, TABLE 1. /2/ PRODUCT SUPPLIED TO THIS SPECIFICATION SHALL BE MANUFACTURED AND ASSEMBLED BY AN ACCREDITED MANUFACTURER OR ASSEMBLED BY AN ACCREDITED ASSEMBLING DISTRIBUTOR LISTED IN THE PERFORMANCE REVIEW INSTITUTE (PRI) QUALIFIED PRODUCTS LIST FOR PRI-QPL-AS5420 FOR THIS STANDARD. SE
27、E www.eAuditN FOR CURRENT QPL ONLINE. AEROSPACE STANDARD AS5423SHEET 12 OF 13REV. BHOSE ASSEMBLY, LINED SILICONE, HEATED, FLARELESS TO FIXED CAVITY, 125 PSI, POTABLE WATER 3. MARKING: AS5420. 4. OPERATING CHARACTERISTICS: a. OPERATING TEMPERATURE: -65 TO +160 F (-54 TO +71 C). b. OPERATING PRESSURE:
28、 125 PSI MAX c. THERMOSTAT SHALL BE SET TO CLOSE AT 40 F MINIMUM AND OPEN AT 70 F MAXIMUM. d. POWER CONSUMPTION: NOMINAL POWER IN WATTS SHOULD FALL WITHIN 10% OF THE VALUE OBTAINED FROM EQUATION 1: POWER = (4 x ID + 8.5) x L/12 + 10 x ID2(EQ. 1) WHERE: ID = HOSE ID IN INCHES L = ASSEMBLY LENGTH “L”
29、IN INCHES 5. ACCEPTANCE TEST AND CLEANING: AS5420. 6. CONSTRUCTION: AS5420. /7/ LENGTH “L” IS A FOUR-DIGIT NUMBER OF WHICH THE FIRST THREE DIGITS DESCRIBE THE HOSE ASSEMBLY LENGTH IN WHOLE INCHES, AND THE FOURTH DIGIT THE FRACTION OF AN INCH IN EIGHTHS. LENGTH “L” IS MEASURED TO “GAGE POINT” ON ASSE
30、MBLIES WITH FLARELESS SWIVEL END FITTINGS. SEE TABLE 3 FOR LENGTH TOLERANCES. MINIMUM LENGTH IS 5 INCHES MAXIMUM LENGTH IS 360 INCHES. /8/ FOR DETERMINING HOSE WEIGHT, DEDUCT HOSE LENGTH CORRECTION FACTOR FROM THE ASSEMBLY LENGTH. /9/ FITTING WEIGHT INCLUDES WEIGHT OF THERMOSTAT AND ASSOCIATED MATER
31、IALS. /10/ FITTING END IN ACCORDANCE WITH NAS1760-(SIZE) EXCEPT AS NOTED. /11/ FITTING END IN ACCORDANCE WITH AS4375-(SIZE) EXCEPT AS NOTED. /12/ FITTING END IN ACCORDANCE WITH AS1656-1-(SIZE) EXCEPT AS NOTED. /13/ FITTING END IN ACCORDANCE WITH AS1656-3-(SIZE) EXCEPT AS NOTED. /14/ LEAD WIRES ARE 1
32、8 AWG, TINNED COPPER PER AS22759/34 AND SHALL BE 3 TO 4 FEET LONG. A DARK COLOR SHALL BE USED FOR THE “HOT LEAD” CONTAINING THE THERMOSTAT CIRCUIT AND THE RETURN LEAD SHALL BE WHITE. /15/ SINGLE PIN CONNECTORS SHALL BE PER AS5420. THE “HOT LEAD” (DARK COLOR) SHALL TERMINATE WITH A PLUG CONNECTOR AND
33、 THE RETURN LEAD SHALL TERMINATE WITH A SOCKET CONNECTOR. 16. DIMENSIONING AND TOLERANCING: ASME Y14.5M-1994. 17. DIMENSIONS IN INCHES. UNLESS OTHERWISE SPECIFIED, TOLERANCES: LINEAR DIMENSIONS .010, ANGULAR DIMENSIONS 2 DEGREES. AEROSPACE STANDARD AS5423SHEET 13 OF 13REV. BHOSE ASSEMBLY, LINED SILI
34、CONE, HEATED, FLARELESS TO FIXED CAVITY, 125 PSI, POTABLE WATER 18. EXAMPLE OF PART NUMBER: AS5423 H 024 2 A1 CSINGLE PIN CONNECTOR REQUIRED (OMIT IF CONNECTORS ARE NOT REQUIRED) /15/ STYLE (SEE FIGURES 1 THRU 20) FRACTIONAL LENGTH IN EIGHTHS OF AN INCH INCREMENTS (.25 INCH) /7/ LENGTH IN WHOLE INCH
35、ES (24 INCHES) /7/ HOSE ASSEMBLY SIZE LETTER CODE (.500 INCH HOSE SIZE) (SEE TABLE 1) BASIC PART NUMBER 19. A CHANGE BAR (l) LOCATED IN THE LEFT MARGIN IS FOR THE CONVENIENCE OF THE USER IN LOCATING AREAS WHERE TECHNICAL REVISIONS, NOT EDITORIAL CHANGES, HAVE BEEN MADE TO THE PREVIOUS ISSUE OF THIS DOCUMENT. AN (R) SYMBOL TO THE LEFT OF THE DOCUMENT TITLE INDICATES A COMPLETE REVISION OF THE DOCUMENT, INCLUDING TECHNICAL REVISIONS. CHANGE BARS AND (R) ARE NOT USED IN ORIGINAL PUBLICATIONS, NOR IN DOCUMENTS THAT CONTAIN EDITORIAL CHANGES ONLY.
