1、 SAE Technical Standards Board Rules provide that: “This report is published by SAE to advance the state of technical and engineering sciences. The use of this report is entirely voluntary, and its applicability and suitability for any particular use, including any patent infringement arising there
2、from, is the sole responsibility of the user.” SAE reviews each technical report at least every five years at which time it may be revised, reaffirmed, stabilized, or cancelled. SAE invites your written comments and suggestions. Copyright 2012 SAE International All rights reserved. No part of this p
3、ublication may be reproduced, stored in a retrieval system or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of SAE. TO PLACE A DOCUMENT ORDER: Tel: 877-606-7323 (inside USA and Canada) Tel: +1 724-776-497
4、0 (outside USA) Fax: 724-776-0790 Email: CustomerServicesae.org SAE WEB ADDRESS: http:/www.sae.org SAE values your input. To provide feedback on this Technical Report, please visit http:/www.sae.org/technical/standards/AS7330 AEROSPACE STANDARD AS7330 Issued 1992-10 Reaffirmed 2012-11 Superseding AM
5、S7330A Rings, Retaining - Spiral Wound, Uniform Section Corrosion Resistant Steel Procurement Specification For FSC 5365 RATIONALE AS7330 has been reaffirmed to comply with the SAE five-year review policy. SAE AS7330 Page 2 of 22 SAE AS7330 Page 3 of 22 SAE AS7330 Page 4 of 22 SAE AS7330 Page 5 of 2
6、2 SAE AS7330 Page 6 of 22 SAE AS7330 Page 7 of 22 SAE AS7330 Page 8 of 22 SAE AS7330 Page 9 of 22 SAE AS7330 Page 10 of 22 SAE AS7330 Page 11 of 22 SAE AS7330 Page 12 of 22 SAE AS7330 Page 13 of 22 SAE AS7330 Page 14 of 22 SAE AS7330 Page 15 of 22 SAE AS7330 Page 16 of 22 SAE AS7330 Page 17 of 22 SAE AS7330 Page 18 of 22 SAE AS7330 Page 19 of 22 SAE AS7330 Page 20 of 22 SAE AS7330 Page 21 of 22 SAE AS7330 Page 22 of 22
