1、AEROSPACE STANDARD CONNECTOR, RECEPTACLE, FLANGE MOUNT, ELECTRICAL,CIRCULAR, HIGH DENSITY, QUICK DISCONNECT, ENVIRONMENT RESISTING, CRIMP TYPE CONTACTS ANDACCESSORIES (CLASS A, F, AND E - SERIES 2)AS81511/1Copyright 2014 SAE International All rights reserved. No part of this publication may be repro
2、duced, stored in a retrieval system or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of SAE. TO PLACE A DOCUMENT ORDER: Tel: 877-606-7323 (inside USA and Canada) Tel: +1 724-776-4970 (outside USA) Fax: 72
3、4-776-0790 Email: CustomerServicesae.org SAE WEB ADDRESS: http:/www.sae.org ISSUED 2014-10THIRD ANGLE PROJECTION CUSTODIAN: AE-8/AE-8C1 FEDERAL SUPPLY CLASS 5935 AS81511/1SHEET 1 OF 4PROCUREMENT SPECIFICATION: AS81511SAE Technical Standards Board Rules provide that: “This report ispublishedby SAE to
4、advance thestate of technicalandengineering sciences. Theuse ofthisreportis entirelyvoluntary, andits applicability and suitability forany particular use,including any patent infringement arising therefrom, is thesole responsibilityoftheuser.”SAE reviews eachtechnicalreport at least every five years
5、 at which time itmay berevised,reaffirmed, stabilized, orcancelled. SAE invites yourwrittencomments andsuggestions. SAE values your input. To provide feedbackon this Technical Report, please visit http:/www.sae.org/technical/standards/AS81511/1RATIONALE THIS DETAIL SPECIFICATION SHEET IS WRITTEN TO
6、PERMIT THE CANCELLATION AND SUPERSESSION OF MIL-C-81511/1 WITH THIS DOCUMENT. NOTICE THE COMPLETE REQUIREMENTS FOR PROCURING THE PRODUCT DESCRIBED HEREIN SHALL CONSIST OF THIS DOCUMENT AND THE LATEST ISSUE OF AS81511. FIGURE 1 - CONNECTOR RECEPTACLE AEROSPACE STANDARD AS81511/1SHEET 2 OF 4CONNECTOR,
7、 RECEPTACLE, FLANGE MOUNT, ELECTRICAL, CIRCULAR, HIGH DENSITY, QUICK DISCONNECT, ENVIRONMENT RESISTING, CRIMP TYPE CONTACTS AND ACCESSORIES (CLASS A, F, AND E - SERIES 2)FIGURE 1A - CONNECTOR RECEPTACLE (CONTINUED) TABLE 1 - FIGURE 1 METRIC EQUIVALENTS INCHES MILLIMETERS INCHES MILLIMETERS INCHES MI
8、LLIMETERS INCHES MILLIMETERS INCHES MILLIMETERS .003 0.08 .016 0.41 .090 2.29 .200 5.08 1.340 34.04 .005 0.13 .065 1.65 .094 2.39 .230 5.84.006 0.15 .067 1.70 .116 2.95 .765 19.43 .010 0.25 .073 1.85 .125 3.18 .775 19.69.015 0.38 .075 1.91 .126 3.20 1.275 32.39 TABLE 2 - FIGURE 1 DIMENSIONS SHELLSIZ
9、EBDEFTHREAD G H PARBSCBRBSCCR BSCDR BSCFF RADIUS EE BSC POSITION 1234568.553(14.05) .547(13.89) .430(10.92) .424(10.77) .422(10.72) .407(10.34) 1/2-28UNEF-2A .820(20.83) .804(20.42).599(15.21) .589(14.96) .640(16.26).630(16.00) 128 - - - .120 (3.05).100 (2.54)40 40 40 40 40 4010.678(17.22) .672(17.0
10、7) .555(14.10) .549(13.94) .548(13.92) .533(13.54) 5/8-28UN-2A .945(24.00) .929(23.60).724(18.39) .714(18.14).765(19.43) .755(19.18)105 140 215 265 .120 (3.05).100 (2.54)60 46 46 60 89 6014.928(23.57) .922(23.42) .805(20.45) .799(20.29) .798(20.27) .783(19.89) 7/8-28UN-2A 1.133(28.78) 1.117(28.37).9
11、11(23.14) .901(22.89)1.015(25.78) 1.005(25.53)105 140 215 265 .120 (3.05).100 (2.54)60 46 46 60 89 60161.054(26.77) 1.048(26.62) .930(23.63) .924(23.47) .924(23.47) .909(23.09) 1-28UN-2A 1.258(31.95) 1.242(31.55).974(24.74) .964(24.49)1.140(28.96) 1.130(28.70)105 140 215 265 .150 (3.81).130 (3.30)50
12、 50 50 50 50 50181.178(29.92) 1.172(29.77) 1.055(26.80) 1.049(26.64) 1.048(26.62) 1.033(26.24) 1 1/8-28UN-2A 1.351(34.32) 1.335(33.91)1.067(27.10) 1.057(26.85)1.265(32.13) 1.255(31.88)105 140 215 265 .150 (3.81).130 (3.30)50 50 50 50 50 50AEROSPACE STANDARD AS81511/1SHEET 3 OF 4CONNECTOR, RECEPTACLE
13、, FLANGE MOUNT, ELECTRICAL, CIRCULAR, HIGH DENSITY, QUICK DISCONNECT, ENVIRONMENT RESISTING, CRIMP TYPE CONTACTS AND ACCESSORIES (CLASS A, F, AND E - SERIES 2)REQUIREMENTS: ALL REQUIREMENTS SHALL CONSIST OF THIS DOCUMENT AND THE LATEST ISSUE OF AS81511. 1. DESIGN: CONNECTORS SHALL BE DESIGNED IN ACC
14、ORDANCE WITH FIGURE 1 AND TABLE 2. DIMENSIONS ARE IN INCHES AND ARE AFTER PLATING. METRIC EQUIVALENTS ARE GIVEN FOR INFORMATION ONLY AND ARE BASED ON 1 INCH = 25.4 MM. UNLESS OTHERWISE SPECIFIED, TOLERANCES ARE .016 INCHES. THE NORMAL MATING KEYWAY POSITION IS SHOWN IN FIGURE 1 AND 1A. FOR ALTERNATE
15、 KEYWAY POSITIONS, SEE AS81511 FIGURE 4. THE .200 MAX. DIMENSION IN FIGURE 1A IS THE DISTANCE FROM THE FRONT OF THE SHELL TO THE POINT AT WHICH A GAGE PIN, HAVING THE SAME BASIC DIAMETER AS THE PLUG SHELL, ENGAGES THE SPRING MEMBER. CONNECTORS ARE SERIES 2, CLASSES ARE A, F AND E. CONTACTS ARE CRIMP
16、 TYPE REMOVABLE, STYLE P AND S. 2. FOR INSERT ARRANGEMENTS, SEE AS81511, APPENDIX A. 3. PART NUMBER: THE CONNECTOR PART NUMBER WILL CONSIST OF THE LETTER M, THE BASIC SPECIFICATION NUMBER/APPLICABLE SPECIFICATION SHEET, AND THE APPLICABLE ALPHA-NUMERIC CHARACTERS ON THE CONNECTOR SHELL. THE PART NUM
17、BER SHALL BE FORMULATED AS IN THE FOLLOWING EXAMPLE: M81511/01ED01P1. 4. SHELL POLARIZATION: 1 THROUGH 6 KEY POSITION. 5. INSERTION AND REMOVAL TOOLS: AS81969/2 INSERTION TOOL, AS81969/3 REMOVAL TOOL. 6. MATING CONNECTOR: THIS RECEPTACLE MATES DIRECTLY WITH AN AS81511/6 PLUG. 7. CONNECTOR WEIGHT: TH
18、E CONNECTOR REFERENCE WEIGHTS ARE LISTED IN TABLE 3. TABLE 3 - CONNECTOR WEIGHT SHELL SIZE WEIGHT (REFERENCE - POUNDS) 1/ 18 (CODE F) .071 16 (CODE E) .064 14 (CODE D) .050 10 (CODE B) .030 8 (CODE A) .023 1/ CONTACTS NOT INCLUDED IN WEIGHT. APPLICATION NOTES: 1. FOR SHELL SIZES 20, 22, AND 24, USE
19、AS81511/21 CONNECTORS. 2. AS81511 CONNECTORS AND ACCESSORIES ARE NOT RECOMMENDED FOR NEW DESIGN. AEROSPACE STANDARD AS81511/1SHEET 4 OF 4CONNECTOR, RECEPTACLE, FLANGE MOUNT, ELECTRICAL, CIRCULAR, HIGH DENSITY, QUICK DISCONNECT, ENVIRONMENT RESISTING, CRIMP TYPE CONTACTS AND ACCESSORIES (CLASS A, F,
20、AND E - SERIES 2)SPECIFICATION NOTES: NOTICE THIS DOCUMENT REFERENCES A PART WHICH CONTAINS CADMIUM AS A PLATING MATERIAL. CONSULT LOCAL OFFICIALS IF YOU HAVE QUESTIONS CONCERNING CADMIUMS USE. 1. A CHANGE BAR (l) LOCATED IN THE LEFT MARGIN IS FOR THE CONVENIENCE OF THE USER IN LOCATING AREAS WHERE
21、TECHNICAL REVISIONS, NOT EDITORIAL CHANGES, HAVE BEEN MADE TO THE PREVIOUS ISSUE OF THIS DOCUMENT. AN (R) SYMBOL TO THE LEFT OF THE DOCUMENT TITLE INDICATES A COMPLETE REVISION OF THE DOCUMENT, INCLUDING TECHNICAL REVISIONS. CHANGE BARS AND (R) ARE NOT USED IN ORIGINAL PUBLICATIONS, NOR IN DOCUMENTS THAT CONTAIN EDITORIAL CHANGES ONLY.
