1、AEROSPACE STANDARD ACCESSORY, COVER, PROTECTIVE, RECEPTACLE, CONNECTOR, ELECTRICAL, CIRCULAR, HIGH DENSITY, QUICK DISCONNECT, ENVIRONMENT RESISTING(SERIES 1 OR 2)AS81511/18Copyright 2014 SAE International All rights reserved. No part of this publication may be reproduced, stored in a retrieval syste
2、m or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of SAE. TO PLACE A DOCUMENT ORDER: Tel: 877-606-7323 (inside USA and Canada) Tel: +1 724-776-4970 (outside USA) Fax: 724-776-0790 Email: CustomerServices
3、ae.org SAE WEB ADDRESS: http:/www.sae.org ISSUED 2014-10THIRD ANGLE PROJECTION CUSTODIAN: AE-8/AE-8C1 FEDERAL SUPPLY CLASS 5935 AS81511/18SHEET 1 OF 3PROCUREMENT SPECIFICATION: AS81511SAE Technical Standards Board Rules provide that: “This report ispublishedby SAE toadvance thestate of technicalande
4、ngineering sciences. Theuse ofthisreportis entirelyvoluntary, andits applicability and suitability forany particular use,including any patent infringement arising therefrom, is thesole responsibilityoftheuser.”SAE reviews eachtechnicalreport at least every five years at which time itmay berevised,re
5、affirmed, stabilized, orcancelled. SAE invites yourwrittencomments andsuggestions. SAE values your input. To provide feedbackon this Technical Report, please visit http:/www.sae.org/technical/standards/AS81511/18RATIONALE THIS DETAIL SPECIFICATION SHEET IS WRITTEN TO PERMIT THE CANCELLATION AND SUPE
6、RSESSION OF MIL-C-81511/18 WITH THIS DOCUMENT. NOTICE THE COMPLETE REQUIREMENTS FOR PROCURING THE PRODUCT DESCRIBED HEREIN SHALL CONSIST OF THIS DOCUMENT AND THE LATEST ISSUE OF AS81511. FIGURE 1 - PROTECTIVE COVER, RECEPTACLE AEROSPACE STANDARD AS81511/19SHEET 2 OF 3ACCESSORY, DUMMY STOWAGE RECEPTA
7、CLE, CONNECTOR, ELECTRICAL, CIRCULAR, HIGH DENSITY, QUICK DISCONNECT, ENVIRONMENT RESISTING (FOR SERIES 2 CONNECTORS)FIGURE 1A - PROTECTIVE COVER, RECEPTACLE (DETAIL A) TABLE 1 - FIGURE 1 METRIC EQUIVALENTS INCHES MILLIMETERS INCHES MILLIMETERS INCHES MILLIMETERS INCHES MILLIMETERS .006 0.15 .100 2.
8、54 .206 5.23 .465 11.81 .022 0.56 .112 2.84 .211 5.36 .835 21.21.028 0.71 .125 3.18 .215 5.46 .885 22.48 .047 1.19 .156 3.96 .220 5.59 .094 2.39 .161 4.09 .445 11.30 TABLE 2 - FIGURE 1 DIMENSIONS/CONFIGURATION PARTNUMBER SHELLSIZEBDIA.KDIA.APPROX. WEIGHT (LB) E ONE LINK M81511/18-08 (SERIES 1 OR 2)
9、8.553 (14.05).547 (13.89) .844 (21.44).830 (21.08) .023 3.0 (76.20) M81511/18-10 (SERIES 1 OR 2) 10.678 (17.22).672 (17.07) .969 (24.61).955 (24.26) .027 3.0 (76.20) M81511/18-14 (SERIES 1 OR 2) 14.928 (23.57).922 (23.42) 1.219 (30.96) 1.205 (30.61) .038 3.5 (88.90) M81511/18-16 (SERIES 1 OR 2) 161.
10、054 (26.77) 1.048 (26.62) 1.345 (34.16) 1.331 (33.81) .043 3.5 (88.90) M81511/18-18 (SERIES 1 OR 2) 181.178 (29.92) 1.172 (29.77) 1.469 (37.31) 1.455 (36.96) .050 3.5 (88.90) M81511/18-20 (SERIES 1 OR 2) 201.316 (33.43) 1.308 (33.22) 1.594 (40.49) 1.580 (40.13) .057 3.5 (88.90) M81511/18-22 (SERIES
11、1 OR 2) 221.441 (36.60) 1.433 (36.40) 1.719 (43.66) 1.705 (43.31) .065 3.5 (88.90) M81511/18-24 (SERIES 1 OR 2) 241.566 (39.78) 1.558 (39.57) 1.844 (46.84) 1.830 (46.48) .074 3.5 (88.90) AEROSPACE STANDARD AS81511/19SHEET 3 OF 3ACCESSORY, DUMMY STOWAGE RECEPTACLE, CONNECTOR, ELECTRICAL, CIRCULAR, HI
12、GH DENSITY, QUICK DISCONNECT, ENVIRONMENT RESISTING (FOR SERIES 2 CONNECTORS)REQUIREMENTS: ALL REQUIREMENTS SHALL CONSIST OF THIS DOCUMENT AND THE LATEST ISSUE OF AS81511. 1. DESIGN: PROTECTIVE COVERS SHALL BE DESIGNED IN ACCORDANCE WITH FIGURE 1 AND TABLE 2. DIMENSIONS ARE IN INCHES AND APPLY AFTER
13、 PLATING. METRIC EQUIVALENTS ARE GIVEN FOR GENERAL INFORMATION ONLY AND ARE BASED ON 1 INCH = 25.4 MM. UNLESS OTHERWISE SPECIFIED, TOLERANCES ARE .016 INCHES. THIS COVER MATES WITH AS81511/6 CONNECTORS. 2. MATERIAL/PLATING: BODY - ALUMINUM BASE MATERIAL IN ACCORDANCE WITH AS81511 PLATED IN ACCORDANC
14、E WITH AMS-QQ-P-416, TYPE II, CLASS 3. A PRELIMINARY PLATING OF ANOTHER METAL IS PERMISSIBLE. THE RESULTING FINISH SHALL BE OLIVE DRAB (LIGHT TO DARK - 500 HOUR CORROSION). CHAIN - STAINLESS STEEL SASH CHAIN PER RR-C-271, TYPE II, CLASS 3, GRADE B, PASSIVATED. CHAIN END FASTENERS - COMMERCIAL GRADE
15、OF STAINLESS STEEL, PASSIVATED. INSERT - SILICONE RUBBER IN ACCORDANCE WITH AS81511. APPLICATION NOTES: 1. AS81511 CONNECTORS AND ACCESSORIES ARE NOT RECOMMENDED FOR NEW DESIGN. SPECIFICATION NOTES: NOTICE THIS DOCUMENT REFERENCES A PART WHICH CONTAINS CADMIUM AS A PLATING MATERIAL. CONSULT LOCAL OF
16、FICIALS IF YOU HAVE QUESTIONS CONCERNING CADMIUMS USE. 1. A CHANGE BAR (l) LOCATED IN THE LEFT MARGIN IS FOR THE CONVENIENCE OF THE USER IN LOCATING AREAS WHERE TECHNICAL REVISIONS, NOT EDITORIAL CHANGES, HAVE BEEN MADE TO THE PREVIOUS ISSUE OF THIS DOCUMENT. AN (R) SYMBOL TO THE LEFT OF THE DOCUMENT TITLE INDICATES A COMPLETE REVISION OF THE DOCUMENT, INCLUDING TECHNICAL REVISIONS. CHANGE BARS AND (R) ARE NOT USED IN ORIGINAL PUBLICATIONS, NOR IN DOCUMENTS THAT CONTAIN EDITORIAL CHANGES ONLY.
