1、AEROSPACE STANDARD CONNECTOR, RECEPTACLE, CABLE CONNECTING, ELECTRICAL, CIRCULAR, HIGH DENSITY, QUICK DISCONNECT, ENVIRONMENT RESISTING, CRIMP TYPE CONTACTS (CLASS A, F, AND E - SERIES 1)AS81511/25Copyright 2014 SAE International All rights reserved. No part of this publication may be reproduced, st
2、ored in a retrieval system or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of SAE. TO PLACE A DOCUMENT ORDER: Tel: 877-606-7323 (inside USA and Canada) Tel: +1 724-776-4970 (outside USA) Fax: 724-776-079
3、0 Email: CustomerServicesae.org SAE WEB ADDRESS: http:/www.sae.org ISSUED 2014-10THIRD ANGLE PROJECTION CUSTODIAN: AE-8/AE-8C1 FEDERAL SUPPLY CLASS 5935AS81511/25SHEET 1 OF 4PROCUREMENT SPECIFICATION: AS81511SAE Technical Standards Board Rules provide that: “This report ispublishedby SAE toadvance t
4、hestate of technicalandengineering sciences. Theuse ofthisreportis entirelyvoluntary, andits applicability and suitability forany particular use,including any patent infringement arising therefrom, is thesole responsibilityoftheuser.”SAE reviews eachtechnicalreport at least every five years at which
5、 time itmay berevised,reaffirmed, stabilized, orcancelled. SAE invites yourwrittencomments andsuggestions. SAE values your input. To provide feedbackon this Technical Report, please visit http:/www.sae.org/technical/standards/AS81511/25RATIONALE THIS DETAIL SPECIFICATION SHEET IS WRITTEN TO PERMIT T
6、HE CANCELLATION AND SUPERSESSION OF MIL-C-81511/25 WITH THIS DOCUMENT. NOTICE THE COMPLETE REQUIREMENTS FOR PROCURING THE PRODUCT DESCRIBED HEREIN SHALL CONSIST OF THIS DOCUMENT AND THE LATEST ISSUE OF AS81511. FIGURE 1 - CONNECTOR RECEPTACLE, CABLE CONNECTING AEROSPACE STANDARD AS81511/25SHEET 2 OF
7、 4CONNECTOR, RECEPTACLE, CABLE CONNECTING, ELECTRICAL, CIRCULAR, HIGH DENSITY, QUICK DISCONNECT, ENVIRONMENT RESISTING, CRIMP TYPE CONTACTS (CLASS A, F, AND E - SERIES 1)TABLE 1 - FIGURE 1 METRIC EQUIVALENTS INCHES MILLIMETERS INCHES MILLIMETERS INCHES MILLIMETERS INCHES MILLIMETERS .003 0.08 .067 1
8、70 .230 5.84 1.471 37.36 .005 0.13 .073 1.85 .685 17.40 1.531 38.89.006 0.15 .090 2.29 .705 17.91 .010 0.25 .094 2.39 1.406 35.71.015 0.38 .200 5.08 1.436 36.47 TABLE 2 - FIGURE 1 DIMENSIONS/CONFIGURATION SHELLSIZEBDEFTHREADGACROSS FLATS KLACROSS FLAT NTHREADP LL 8.553(14.05).547(13.89) .430(10.92)
9、424(10.77) .422(10.72).407(10.34) 1/2-28UNEF-2A.989(25.12) .969(24.61) 1.072(27.23) 1.052(26.72) .598(15.19) .590(14.99) 5/8-20UN-2A .640(16.26).630(16.00).610(15.49).600(15.24)10.678(17.22).672(17.07) .555(14.10).549(13.94) .548(13.92).533(13.54) 5/8-28UN-2A 1.114(28.30) 1.094(27.79) 1.197(30.40)
10、1.177(29.90) .723(18.36) .715(18.16) 3/4-20UNEF-2A .765(19.43).755(19.18).735(18.67).725(18.42)14.928(23.57).922(23.42) .805(20.45).799(20.29) .798(20.27).783(19.89) 7/8-28UN-2A 1.401(35.59) 1.381(35.08) 1.510(38.35) 1.490(37.85) .973(24.71) .965(24.51) 1-20UNEF-2A 1.015(25.78)1.005(25.53).985(25.02
11、).975(24.77)161.054(26.77)1.048(26.62) .930(23.63).924(23.47) .924(23.47).909(23.09) 1-28UN-2A 1.526(38.76) 1.506(38.25) 1.635(41.53) 1.615(41.02) 1.098(27.89) 1.090(27.69) 1 1/8-20UN-2A 1.140(28.96)1.130(28.70)1.110(28.19)1.100(27.94)181.178(29.92)1.172(29.77) 1.055(26.80)1.049(26.64) 1.048(26.62)1
12、033(26.24) 1 1/8-28UN-2A 1.651(41.94) 1.631(41.43) 1.745(44.32) 1.725(43.82) 1.222(31.04) 1.214(30.84) 1 1/4-20UN-2A 1.265(32.13)1.255(31.88)1.235(31.37)1.225(31.12)201.303(33.10)1.297(32.94) 1.180(29.97)1.174(29.82) 1.173(29.79)1.158(29.41) 1 1/4-28UN-2A 1.776(45.11) 1.756(44.60) 1.870(47.50) 1.85
13、0(46.99) 1.347(34.21) 1.339(34.01) 1 3/8-20UN-2A 1.390(35.31)1.380(35.05)1.360(34.54)1.350(34.29)221.428(36.27)1.422(36.12) 1.305(33.15)1.299(32.99) 1.298(32.97)1.283(32.59) 1 3/8-28UN-2A 1.901(48.29) 1.881(47.78) 1.995(50.67) 1.975(50.17) 1.472(37.39) 1.464(37.19) 1 1/2-20UN-2A 1.515(38.48)1.505(38
14、23)1.485(37.72)1.475(37.47)241.553(39.45)1.547(39.29) 1.430(36.32)1.424(36.17) 1.423(36.14)1.408(35.76) 1 1/2-28UN-2A 2.026(51.46) 2.006(50.95) 2.120(53.85) 2.100(53.34) 1.597(40.56) 1.589(40.36) 1 5/8-20UN-2A 1.640(41.66)1.630(41.40)1.610(40.89)1.600(40.64)AEROSPACE STANDARD AS81511/25SHEET 3 OF 4
15、CONNECTOR, RECEPTACLE, CABLE CONNECTING, ELECTRICAL, CIRCULAR, HIGH DENSITY, QUICK DISCONNECT, ENVIRONMENT RESISTING, CRIMP TYPE CONTACTS (CLASS A, F, AND E - SERIES 1)TABLE 2A - FIGURE 1 DIMENSIONS/CONFIGURATION SHELLSIZEARBSCBRBSCCR BSCDR BSCPANELO-RING EE BSC POSITION 1 2 3 4 5 6 8 105 140 215 26
16、5 AS3582-018 60 46 43 60 89 43 10 95 141 208 236 AS3582-020 53 87 51 77 87 87 14 95 141 208 236 AS3582-024 53 87 51 77 87 87 16 80 142 196 293 AS3582-026 98 98 98 98 98 98 18 80 142 196 293 AS3582-028 98 98 98 98 98 98 20 80 142 196 293 AS3582-029 98 98 98 98 98 98 22 80 142 196 293 AS3582-030 98 98
17、 98 98 98 98 24 80 142 196 293 AS3582-031 98 98 98 98 98 98 REQUIREMENTS: ALL REQUIREMENTS SHALL CONSIST OF THIS DOCUMENT AND THE LATEST ISSUE OF AS81511. 1. DESIGN: CONNECTORS SHALL BE DESIGNED IN ACCORDANCE WITH FIGURE 1 AND TABLE 2. DIMENSIONS ARE IN INCHES AND APPLY AFTER PLATING. METRIC EQUIVAL
18、ENTS ARE GIVEN FOR GENERAL INFORMATION ONLY AND ARE BASED ON 1 INCH = 25.4 MM. UNLESS OTHERWISE SPECIFIED, TOLERANCES ARE .016 INCHES. NORMAL MATING KEYWAY POSITION SHOWN IN FIGURE 1. FOR ALTERNATE KEYWAY POSITIONS, SEE AS81511, FIGURE 8. SLOTTED NUT SHALL CONFORM TO AS81511/20. 2. FOR INSERT ARRANG
19、EMENTS, SEE AS81511, APPENDIX A. 3. PART NUMBER: THE CONNECTOR PART NUMBER WILL CONSIST OF THE LETTER M, THE BASIC SPECIFICATION NUMBER/APPLICABLE SPECIFICATION SHEET, AND THE APPLICABLE ALPHA-NUMERIC CHARACTERS ON THE CONNECTOR SHELL. THE PART NUMBER SHALL BE FORMULATED AS IN THE FOLLOWING EXAMPLE:
20、 M81511/25ED01P1. M81511/25 E D 01 P 1 BASIC PART NUMBERCLASSSHELL SIZE INSERT ARRANGEMENT CONTACT DESIGNATOR KEY POSITIONS 4. SHELL POLARIZATION: 1 THROUGH 6 KEY POSITION. 5. INSERTION AND REMOVAL TOOLS: AS81969/2 INSERTION TOOL, AS81969/3 REMOVAL TOOL. 6. MATING CONNECTOR: THIS RECEPTACLE MATES DI
21、RECTLY WITH AN AS81511/26 PLUG. 7. CONNECTOR WEIGHT: THE CONNECTOR REFERENCE WEIGHTS ARE LISTED IN TABLE 3. AEROSPACE STANDARD AS81511/25SHEET 4 OF 4CONNECTOR, RECEPTACLE, CABLE CONNECTING, ELECTRICAL, CIRCULAR, HIGH DENSITY, QUICK DISCONNECT, ENVIRONMENT RESISTING, CRIMP TYPE CONTACTS (CLASS A, F,
22、AND E - SERIES 1)TABLE 3 - CONNECTOR WEIGHT SHELL SIZE WEIGHT (REFERENCE - POUNDS) 1/ 24 (CODE J) .151 22 (CODE H) .137 20 (CODE G) .119 18 (CODE F) .100 16 (CODE E) .082 14 (CODE D) .070 10 (CODE B) .046 8 (CODE A) .035 1/ REMOVABLE CRIMP CONTACTS NOT INCLUDED IN WEIGHT. APPLICATION NOTES: 1. AS815
23、11 CONNECTORS AND ACCESSORIES ARE NOT RECOMMENDED FOR NEW DESIGN. SPECIFICATION NOTES: NOTICE THIS DOCUMENT REFERENCES A PART WHICH CONTAINS CADMIUM AS A PLATING MATERIAL. CONSULT LOCAL OFFICIALS IF YOU HAVE QUESTIONS CONCERNING CADMIUMS USE. 1. A CHANGE BAR (l) LOCATED IN THE LEFT MARGIN IS FOR THE
24、 CONVENIENCE OF THE USER IN LOCATING AREAS WHERE TECHNICAL REVISIONS, NOT EDITORIAL CHANGES, HAVE BEEN MADE TO THE PREVIOUS ISSUE OF THIS DOCUMENT. AN (R) SYMBOL TO THE LEFT OF THE DOCUMENT TITLE INDICATES A COMPLETE REVISION OF THE DOCUMENT, INCLUDING TECHNICAL REVISIONS. CHANGE BARS AND (R) ARE NOT USED IN ORIGINAL PUBLICATIONS, NOR IN DOCUMENTS THAT CONTAIN EDITORIAL CHANGES ONLY.
