1、AEROSPACE STANDARD CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL,NONENVIRONMENTAL, STRAIGHT, CATEGORY 3B (FOR MIL-DTL-38999 SERIES III AND IV CONNECTORS)AS85049/21Copyright 2011 SAE International All rights reserved. No part of this publication may be reproduced, stored in a retrieval system or trans
2、mitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of SAE. TO PLACE A DOCUMENT ORDER: Tel: 877-606-7323 (inside USA and Canada) Tel: +1 724-776-4970 (outside USA) Fax: 724-776-0790 Email: CustomerServicesae.org SAE
3、 WEB ADDRESS: http:/www.sae.org ISSUED 2000-04REVISED 2011-02 THIRD ANGLE PROJECTION CUSTODIAN: AE-8/AE-8C1 REV.BFEDERAL SUPPLY CLASS 5935 AS85049/21SHEET 1 OF 3REV. BPROCUREMENT SPECIFICATION: AS85049SAE Technical Standards Board Rules provide that: “This report ispublishedby SAE toadvance thestate
4、 of technicalandengineering sciences. Theuse ofthis report is entirely voluntary, andits applicability and suitability forany particular use,including any patent infringement arising therefrom, isthe soleresponsibilityofthe user.”SAE reviews eachtechnicalreport at least every five years at which tim
5、e itmay bereaffirmed, revised, orcancelled. SAE invites yourwrittencomments andsuggestions. SAE values your input. To provide feedbackon this Technical Report, please visit http:/www.sae.org/technical/standards/AS85049/21BRATIONALE THIS REVISION IS REQUIRED TO INCORPORATE THE OUTSTANDING AMENDMENT,
6、REVIEW FOR KNOWN TECHNICAL ISSUES AND UPDATE TO MEET SAE FORMAT GUIDELINES. THE REQUIREMENTS FOR PROCURING THE PRODUCT DESCRIBED HEREIN SHALL CONSIST OF THIS SPECIFICATION SHEET AND THE LATEST ISSUE OF SAE AS85049 NOTES: 1. DIMENSIONS ARE IN INCHES. 2. METRIC EQUIVALENTS ARE GIVEN FOR GENERAL INFORM
7、ATION ONLY AND ARE BASED UPON 1.00 INCH = 25.4 MM. 3. METRIC EQUIVALENT ARE IN PARENTHESIS. 4. SEE TABLE 1 FOR MINIMUM AND MAXIMUM CLAMP SIZE AVAILABLE WITH EACH SHELL SIZE. SEE TABLE 2 FOR CABLE RANGE FOR EACH CLAMP SIZE. FIGURE 1 - CONFIGURATION AND DIMENSIONS Copyright SAE International Provided
8、by IHS under license with SAENot for ResaleNo reproduction or networking permitted without license from IHS-,-,-AEROSPACE STANDARD AS85049/21SHEET 2 OF 3REV. BCONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, NONENVIRONMENTAL, STRAIGHT, CATEGORY 3B (FOR MIL-DTL-38999 SERIES III AND IV CONNECTORS) TABLE
9、1 - CONNECTOR SHELL SIZE AND CLAMP SIZE SHELLSIZEMIN CLAMP SIZEMAX CLAMP SIZEA MAX DIA OF COUPLING RING 9 01 02 .75 (19.1) 11 01 03 .85 (21.6) 13 02 04 1.00 (25.4) 15 02 05 1.10 (27.9) 17 02 06 1.25 (31.8) 19 03 07 1.40 (35.6) 21 03 08 1.50 (38.1) 23 03 09 1.65 (41.9) 25 04 10 1.75 (44.5) TABLE 2 -
10、CLAMP SIZE AND DIMENSIONS CLAMPSIZECABLE RANGE Y DIM MAX MIN MAX 01 .062 (1.57) .125(3.18) .80(20.3) 02 .125 (3.18) .250(6.35) 1.00(25.4) 03 .250 (6.35) .375(9.53) 1.10(27.9) 04 .312 (7.92) .500(12.70) 1.20(30.5) 05 .437 (11.10) .625(15.88) 1.25(31.8) 06 .562 (14.27) .750(19.05) 1.40(35.6) 07 .687 (
11、17.45) .875(22.23) 1.50(38.1) 08 .812 (20.62) 1.000 (25.40) 1.65(41.9) 09 .937 (23.80) 1.125 (28.58) 1.75(44.5) 10 1.062 (26.97) 1.250 (31.75) 1.90(48.3) TABLE 3 - LENGTH CODE LENGTH IN INCHES .032 (.81) STANDARD ABC1.50 (38.1) 2.50 (63.5) 3.50 (88.9) 4.50 (114.3) Copyright SAE International Provide
12、d by IHS under license with SAENot for ResaleNo reproduction or networking permitted without license from IHS-,-,-AEROSPACE STANDARD AS85049/21SHEET 3 OF 3REV. BCONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, NONENVIRONMENTAL, STRAIGHT, CATEGORY 3B (FOR MIL-DTL-38999 SERIES III AND IV CONNECTORS) REQU
13、IREMENTS: DESIGN AND CONSTRUCTION: 1. DIMENSIONS AND CONFIGURATION: SEE FIGURE 1 AND TABLES 1, 2, AND 3. 2. INTERFACE DIMENSIONS SHALL CONFORM TO SAE AS85049 FIGURE 3. 3. THE COUPLING NUT SHALL BE CAPTIVATED TO THE ADAPTER BODY AND FREE TO ROTATE. MATERIAL: 1. ADAPTER BODY AND COUPLING NUT - ALUMINU
14、M ALLOY IN ACCORDANCE WITH SAE AS85049. 2. CLAMP SCREWS AND LOCKWASHERS - CORROSION RESISTING STEEL, PASSIVATE. 3. FINISH: IN ACCORDANCE WITH SAE AS85049. A - BLACK ANODIZE 1/ N - ELECTROLESS NICKEL 2/ W - CADMIUM OLIVE DRAB X - NICKEL FLUOROCARBON POLYMER Y - PURE DENSE ELECTRODEPOSITED ALUMINUM 2/
15、 Z - ZINC NICKEL 1/ N IS NOT FOR NAVY USE. RESTRICTED TO AIR FORCE SPACE APPLICATIONS ONLY. 2/ W AND Z FINISH ARE NOT FOR USE IN SPACE APPLICATIONS. ALSO SEE SPECIFICATION NOTES. PART NUMBER: SEE EXAMPLE BELOW: QUALIFICATION: SEE AS85049, CATEGORY 3B. SPECIFICATION NOTES: NOTICE THIS DOCUMENT REFERE
16、NCES A PART WHICH CONTAINS CADMIUM AS A PLATING MATERIAL. CONSULT LOCAL OFFICIALS IF YOU HAVE QUESTIONS CONCERNING CADMIUMS USE. A CHANGE BAR (|) LOCATED IN THE LEFT MARGIN IS FOR THE CONVENIENCE OF THE USER IN LOCATING AREAS WHERE TECHNICAL REVISIONS, NOT EDITORIAL CHANGES HAVE BEEN MADE TO THE PRE
17、VIOUS ISSUE OF THIS DOCUMENT. AN (R) SYMBOL TO THE LEFT OF THE DOCUMENT TITLE INDICATES A COMPLETE REVISION OF THE DOCUMENT, INCLUDING TECHNICAL REVISIONS. CHANGE BARS AND (R) ARE NOT USED IN ORIGINAL PUBLICATIONS NOR IN DOCUMENTS THAT CONTAIN EDITORIAL CHANGES ONLY. Copyright SAE International Provided by IHS under license with SAENot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
