SAE AS 85049 9C-2012 CONNECTOR ACCESSORIES ELECTRICAL BACKSHELL ENVIRONMENTAL CABLE SEALING 90 CATEGORY 1A (FOR AS50151 CRIMP MIL-DTL-26482 SERIES 2 AS81703 SERIES 3 AND MIL-DTL-83.pdf

上传人:花仙子 文档编号:1025669 上传时间:2019-03-21 格式:PDF 页数:9 大小:203.80KB
下载 相关 举报
SAE AS 85049 9C-2012 CONNECTOR ACCESSORIES ELECTRICAL BACKSHELL ENVIRONMENTAL CABLE SEALING 90 CATEGORY 1A (FOR AS50151 CRIMP MIL-DTL-26482 SERIES 2 AS81703 SERIES 3 AND MIL-DTL-83.pdf_第1页
第1页 / 共9页
SAE AS 85049 9C-2012 CONNECTOR ACCESSORIES ELECTRICAL BACKSHELL ENVIRONMENTAL CABLE SEALING 90 CATEGORY 1A (FOR AS50151 CRIMP MIL-DTL-26482 SERIES 2 AS81703 SERIES 3 AND MIL-DTL-83.pdf_第2页
第2页 / 共9页
SAE AS 85049 9C-2012 CONNECTOR ACCESSORIES ELECTRICAL BACKSHELL ENVIRONMENTAL CABLE SEALING 90 CATEGORY 1A (FOR AS50151 CRIMP MIL-DTL-26482 SERIES 2 AS81703 SERIES 3 AND MIL-DTL-83.pdf_第3页
第3页 / 共9页
SAE AS 85049 9C-2012 CONNECTOR ACCESSORIES ELECTRICAL BACKSHELL ENVIRONMENTAL CABLE SEALING 90 CATEGORY 1A (FOR AS50151 CRIMP MIL-DTL-26482 SERIES 2 AS81703 SERIES 3 AND MIL-DTL-83.pdf_第4页
第4页 / 共9页
SAE AS 85049 9C-2012 CONNECTOR ACCESSORIES ELECTRICAL BACKSHELL ENVIRONMENTAL CABLE SEALING 90 CATEGORY 1A (FOR AS50151 CRIMP MIL-DTL-26482 SERIES 2 AS81703 SERIES 3 AND MIL-DTL-83.pdf_第5页
第5页 / 共9页
点击查看更多>>
资源描述

1、 AEROSPACE STANDARD CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, ENVIRONMENTAL, CABLE SEALING, 90, CATEGORY 1A (FOR AS50151 CRIMP, MIL-DTL-26482 SERIES 2, AS81703 SERIES 3, AND MIL-DTL-83723 SERIES III CONNECTORS) AS85049/9 Copyright 2017 SAE International All rights reserved. No part of this publi

2、cation may be reproduced, stored in a retrieval system or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of SAE. TO PLACE A DOCUMENT ORDER: Tel: 877-606-7323 (inside USA and Canada) Tel: +1 724-776-4970 (o

3、utside USA) Fax: 724-776-0790 Email: CustomerServicesae.org SAE WEB ADDRESS: http:/www.sae.org ISSUED 2001-07REVISED2012-07REAFFIRMED 2017-08THIRD ANGLE PROJECTION CUSTODIAN: AE-8/AE-8C1 REV.C FEDERAL SUPPLY CLASS 5935 AS85049 /9 SHEET 1 OF 9 REV. C PROCUREMENT SPECIFICATION: AS85049 SAE Technical S

4、tandards Board Rules provide that: “This report is published by SAEtoadvance thestate of technicaland engineering sciences. The useof this report is entirely voluntary, and its applicability andsuitability for any particularuse, includingany patent infringement arisingtherefrom,is the sole responsib

5、ility of theuser.” SAE reviews eachtechnical reportatleast every fiveyears at whichtime it may be revised, reaffirmed, stabilized, or cancelled. SAE invites your written comments and suggestions.SAE values your input. To provide feedback on this Technical Report, please visit http:/standards.sae.org

6、/AS85049/9C RATIONALE AS85049/9C HAS BEEN REAFFIRMED TO COMPLY WITH THE SAE FIVE-YEAR REVIEW POLICY. NOTICE THE REQUIREMENTS FOR PROCURING THE PRODUCT DESCRIBED HEREIN SHALL CONSIST OF THIS SPECIFICATION SHEET AND THE LATEST ISSUE OF: SAE AS85049. FIGURE 1 - CONFIGURATION AND DIMENSIONS AEROSPACE ST

7、ANDARD AS85049 /9 SHEET 2 OF 9 REV. C CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, ENVIRONMENTAL, CABLE SEALING, 90, CATEGORY 1A (FOR AS50151 CRIMP, MIL-DTL-26482 SERIES 2, AS81703 SERIES 3, AND MIL-DTL-83723 SERIES III CONNECTORS) FIGURE 1 - CONFIGURATION AND DIMENSIONS (CONTINUED) TABLE 1 - DIMEN

8、SIONS DASH NO. CONNECTOR SHELL SIZE CLAMPSIZE A (SEE NOTE 6) STYLE B .125 C REF AS81703 SERIES 3 MIL-DTL-26482 SERIES 2 AS50151 CRIMP MIL-DTL-83723 SERIES III WIRE BUNDLE ACCOMMODATION RANGE MIN MAX 1 3 N/A N/A N/A 4 .125 ( 3.18) .250 ( 6.35) 1 1.800 (45.72) 1.027 (26.09)2 6 .250 ( 6.35) .437 (11.10

9、) 2 1.320 (33.53) 1.027 (26.09)3 N/A 8 8S 8 4 .125 ( 3.18) .250 ( 6.35) 1 1.200 (30.48) 1.027 (26.09)4 10 10S, 10SL 10 4 .125 ( 3.18) .312 ( 7.92) 1 1.920 (48.77) 1.027 (26.09)5 6 .250 ( 6.35) .375 ( 9.53) 1 1.320 (33.53) 1.027 (26.09)6 7 12 12, 12S 12 4 .125 ( 3.18) .312 ( 7.92) 1 1.940 (49.28) 1.0

10、27 (26.09)7 6 .250 ( 6.35) .437 (11.10) 1 1.940 (49.28) 1.027 (26.09)8 10 .350 ( 8.89) .500 (12.70) 1 1.335 (33.91) 1.027 (26.09)9 12 14 14,14S 14 6 .250 ( 6.35) .437 (11.10) 1 2.010 (51.05) 1.027 (26.09)10 10 .350 ( 8.89) .575 (14.61) 1 1.655 (42.04) 1.027 (26.09)11 19 16 16, 16S 16 6 .250 ( 6.35)

11、.437 (11.10) 1 2.100 (53.34) 1.027 (26.09)12 12 .500 (12.70) .700 (17.78) 1 1.745 (44.32) 1.059 (26.90)13 27 18 18 18 10 .350 ( 8.89) .625 (15.88) 1 2.270 (57.66) 1.027 (26.09)14 16 .625 (15.88) .779 (19.79) 1 1.920 (48.77) 1.156 (29.36)15 37 20 20 20 10 .350 ( 8.89) .625 (15.88) 1 2.270 (57.66) 1.0

12、27 (26.09)16 16 .625 (15.88) .904 (22.96) 1 1.920 (48.77) 1.156 (29.36)AEROSPACE STANDARD AS85049 /9 SHEET 3 OF 9 REV. C CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, ENVIRONMENTAL, CABLE SEALING, 90, CATEGORY 1A (FOR AS50151 CRIMP, MIL-DTL-26482 SERIES 2, AS81703 SERIES 3, AND MIL-DTL-83723 SERIES

13、III CONNECTORS) TABLE 1 - DIMENSIONS (CONTINUED) DASH NO. D DIA MAX E .125 V THREAD CLASS 2A F MAX G DIA MAX H MAX 1 .669 (16.99) .636 (16.15) .625-24 UNEF 1.18 (29.97) 1.57 (39.88) 2 .669 (16.99) 1.386 (35.20) .750-20 UNEF 2.02 (51.31) .858 (21.79) 2.41 (61.21) 3 .617 (15.67) .541 (13.74) .625-24 U

14、NEF 1.09 (27.69) 1.48 (37.59) 4 .734 (18.64) .636 (16.15) .625-24 UNEF 1.18 (29.97) 1.57 (39.88) 5 .734 (18.64) .636 (16.15) .750-20 UNEF 1.27 (32.26) 1.66 (42.16) 6 .858 (21.79) .641 (16.28) .625-24 UNEF 1.18 (29.97) 1.57 (39.88) 7 .858 (21.79) .641 (16.28) .750-20 UNEF 1.28 (32.51) 1.67 (42.42) 8

15、.858 (21.79) .641 (16.28) 1.000-20 UNEF 1.37 (34.80) 1.76 (44.70) 9 .984 (24.99) .741 (18.82) .750-20 UNEF 1.38 (35.05) 1.77 (44.96) 10 .984 (24.99) .741 (18.82) 1.000-20 UNEF 1.47 (37.34) 1.86 (47.24) 11 1.112 (28.24) .926 (23.52) .750-20 UNEF 1.59 (40.39) 1.98 (50.29) 12 1.112 (28.24) .926 (23.52)

16、 1.1875-18 UNEF 1.77 (44.96) 2.16 (54.86) 13 1.218 (30.94) 1.016 (25.81) 1.000-20 UNEF 1.80 (45.72) 2.19 (55.63) 14 1.218 (30.94) 1.016 (25.81) 1.4375-18 UNEF 1.97 (50.04) 2.36 (59.94) 15 1.345 (34.16) 1.016 (25.81) 1.000-20 UNEF 1.80 (45.72) 2.19 (55.63) 16 1.345 (34.16) 1.016 (25.81) 1.4375-18 UNE

17、F 1.97 (50.04) 2.36 (59.94) TABLE 1 - DIMENSIONS (CONTINUED) DASH NO. CONNECTOR SHELL SIZE CLAMPSIZE A (SEE NOTE 6) STYLE B .125 C REF AS81703 SERIES 3 MIL-DTL-26482 SERIES 2 AS50151 CRIMP MIL-DTL-83723 SERIES III WIRE BUNDLE ACCOMMODATION RANGE MIN MAX 17 N/A 22 22 22 12 .500 (12.70) .750 (19.05) 1

18、 2.380 (60.45) 1.059 (26.90)18 20 .875 (22.23) 1.029 (26.14) 1 2.025 (51.44) 1.375 (34.93)19 24 24 24 12 .500 (12.70) .750 (19.05) 1 2.380 (60.45) 1.059 (26.90)20 20 .875 (22.23) 1.144 (29.06) 1 2.025 (51.44) 1.375 (34.93)21 N/A 28 N/A 16 .625 (15.88) .937 (23.80) 1 2.550 (64.77) 1.156 (29.36)22 24

19、1.000 (25.40) 1.375 (34.93) 1 2.195 (55.75) 1.500 (38.10)23 32 16 .625 (15.88) .937 (23.80) 1 2.800 (71.12) 1.156 (29.36)24 20 .875 (22.23) 1.250 (31.75) 1 2.800 (71.12) 1.375 (34.93)25 28 1.250 (31.75) 1.625 (41.28) 1 2.445 (62.10) 1.781 (45.24)26 36 16 .625 (15.88) .937 (23.80) 1 2.770 (70.36) 1.1

20、56 (29.36)27 24 1.000 (25.40) 1.375 (34.93) 1 2.770 (70.36) 1.500 (38.10)28 32 1.437 (36.50) 1.840 (46.74) 1 2.415 (61.34) 1.830 (46.48)29 40 16 .625 (15.88) .937 (23.80) 1 2.770 (70.36) 1.156 (29.36)30 24 1.000 (25.40) 1.375 (34.93) 1 2.770 (70.36) 1.500 (38.10)31 32 1.437 (36.50) 1.875 (47.63) 1 2

21、.415 (61.34) 1.830 (46.48)AEROSPACE STANDARD AS85049 /9 SHEET 4 OF 9 REV. C CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, ENVIRONMENTAL, CABLE SEALING, 90, CATEGORY 1A (FOR AS50151 CRIMP, MIL-DTL-26482 SERIES 2, AS81703 SERIES 3, AND MIL-DTL-83723 SERIES III CONNECTORS) TABLE 1 - DIMENSIONS (CONTINU

22、ED) DASH NO. D DIA MAX E .125 V THREAD CLASS 2A F MAX G DIA MAX H MAX 17 1.468 (37.29) 1.166 (29.62) 1.1875-18 UNEF 2.11 (53.59) 2.50 (63.50) 18 1.468 (37.29) 1.166 (29.62) 1.750-18 UNS 2.29 (58.17) 2.68 (68.07) 19 1.593 (40.46) 1.166 (29.62) 1.1875-18 UNEF 2.11 (53.59) 2.50 (63.50) 20 1.593 (40.46)

23、 1.166 (29.62) 1.750-18 UNS 2.29 (58.17) 2.68 (68.07) 21 1.969 (50.01) 1.266 (32.16) 1.4375-18 UNEF 2.33 (59.18) 2.88 (73.15) 22 1.969 (50.01) 1.266 (32.16) 2.000-18 UNS 2.51 (63.75) 3.06 (77.72) 23 2.219 (56.36) 1.616 (41.05) 1.4375-18 UNEF 2.81 (71.37) 3.36 (85.34) 24 2.219 (56.36) 1.616 (41.05) 1

24、.750-18 UNS 2.81 (71.37) 3.36 (85.34) 25 2.219 (56.36) 1.616 (41.05) 2.250-16 UN 3.07 (77.98) 3.62 (91.95) 26 2.469 (62.71) 1.816 (46.13) 1.4375-18 UNEF 3.13 (79.50) 3.68 (93.47) 27 2.469 (62.71) 1.816 (46.13) 2.000-18 UNS 3.13 (79.50) 3.68 (93.47) 28 2.469 (62.71) 1.816 (46.13) 2.500-16 UN 3.39 (86

25、.11) 3.94 (100.08) 29 2.719 (69.06) 2.566 (65.18) 1.4375-18 UNEF 3.88 (98.55) 4.43 (112.52) 30 2.719 (69.06) 2.566 (65.18) 2.000-18 UNS 3.88 (98.55) 4.43 (112.52) 31 2.719 (69.06) 2.566 (65.18) 2.500-16 UN 4.14 (105.16) 4.69 (119.13) TABLE 1 - DIMENSIONS (CONTINUED) DASH NO. CONNECTOR SHELL SIZE CLA

26、MPSIZE A (SEE NOTE 6) STYLE B .125 C REF AS81703 SERIES 3 MIL-DTL-26482 SERIES 2 AS50151 CRIMP MIL-DTL-83723 SERIES III WIRE BUNDLE ACCOMMODATION RANGE MIN MAX 32 N/A N/A 44 N/A 16 .625 (15.88) .937 (23.80) 1 2.770 (70.36) 1.156 (29.36) 33 24 1.000 (25.40) 1.375 (34.93) 1 2.770 (70.36) 1.500 (38.10)

27、 34 32 1.437 (36.50) 1.875 (47.63) 1 2.415 (61.34) 1.830 (46.48) 35 48 16 .625 (15.88) .937 (23.80) 1 2.770 (70.36) 1.156 (29.36) 36 24 1.000 (25.40) 1.375 (34.93) 1 2.770 (70.36) 1.500 (38.10) 37 32 1.437 (36.50) 1.875 (47.63) 1 2.415 (61.34) 1.830 (46.48) 38 61 N/A 12 .500 (12.70) .750 (19.05) 1 2

28、.380 (60.45) 1.059 (26.90) 39 20 .875 (22.23) 1.184 (30.07) 1 2.025 (51.44) 1.375 (34.93) 40 19 16 16, 16S 16 10 .350 ( 8.89) .625 (15.88) 1 2.100 (53.34) 1.027 (26.09) 41 27 18 18 18 4 .125 ( 3.18) .312 ( 7.92) 1 2.270 (57.66) 1.027 (26.09) 42 6 .250 ( 6.35) .437 (11.10) 1 2.270 (57.66) 1.027 (26.0

29、9) 43 37 20 20 20 6 .250 ( 6.35) .437 (11.10) 1 2.270 (57.66) 1.027 (26.09) 44 N/A 22 22 22 4 .125 ( 3.18) .312 ( 7.92) 1 2.380 (60.45) 1.027 (26.09) 45 6 .250 ( 6.35) .437 (11.10) 1 2.380 (60.45) 1.027 (26.09) 46 24 24 24 10 .350 ( 8.89) .625 (15.88) 1 2.380 (60.45) 1.027 (26.09) AEROSPACE STANDARD

30、 AS85049 /9 SHEET 5 OF 9 REV. C CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, ENVIRONMENTAL, CABLE SEALING, 90, CATEGORY 1A (FOR AS50151 CRIMP, MIL-DTL-26482 SERIES 2, AS81703 SERIES 3, AND MIL-DTL-83723 SERIES III CONNECTORS) TABLE 1 - DIMENSIONS (CONTINUED) DASH NO. D DIA MAX E .125 V THREAD CLASS

31、 2A F MAX G DIA MAX H MAX 32 2.969 (75.41) 2.566 (65.18) 1.4375-18 UNEF 3.88 ( 98.55) 4.43 (112.52) 33 2.969 (75.41) 2.566 (65.18) 2.000-18 UNS 3.88 ( 98.55) 4.43 (112.52) 34 2.969 (75.41) 2.566 (65.18) 2.500-16 UN 4.14 (105.16) 4.69 (119.13) 35 3.219 (81.76) 2.566 (65.18) 1.4375-18 UNEF 3.88 ( 98.5

32、5) 4.43 (112.52) 36 3.219 (81.76) 2.566 (65.18) 2.000-18 UNS 3.88 ( 98.55) 4.43 (112.52) 37 3.219 (81.76) 2.566 (65.18) 2.500-16 UN 4.14 (105.16) 4.69 (119.13) 38 1.653 (41.99) 1.166 (29.62) 1.1875-18 UNEF 2.11 ( 53.59) 2.50 ( 63.50) 39 1.653 (41.99) 1.166 (29.62) 1.750-18 UNS 2.29 ( 58.17) 2.68 ( 6

33、8.07) 40 1.112 (28.24) .926 (23.52) 1.000-20 UNEF 1.66 ( 42.16) 2.05 ( 52.07) 41 1.218 (30.94) 1.016 (25.81) .625-24 UNEF 1.80 ( 45.72) 2.19 ( 55.63) 42 1.218 (30.94) 1.016 (25.81) .750-20 UNEF 1.80 ( 45.72) 2.19 ( 55.63) 43 1.345 (34.16) 1.016 (25.81) .750-20 UNEF 1.80 ( 45.72) 2.19 ( 55.63) 44 1.4

34、68 (37.29) 1.166 (29.62) .625-24 UNEF 2.11 ( 53.59) 2.50 ( 63.50) 45 1.468 (37.29) 1.166 (29.62) .750-20 UNEF 2.11 ( 53.59) 2.50 ( 63.50) 46 1.593 (40.46) 1.166 (29.62) 1.000-20 UNEF 2.11 ( 53.59) 2.50 ( 63.50) TABLE 1 - DIMENSIONS (CONTINUED) DASH NO. CONNECTOR SHELL SIZE CLAMPSIZE A (SEE NOTE 6) S

35、TYLE B .125 C REF AS81703 SERIES 3 MIL-DTL-26482 SERIES 2 AS50151 CRIMP MIL-DTL-83723 SERIESIII WIRE BUNDLE ACCOMMODATION RANGE MIN MAX 47 N/A N/A 36 N/A 12 .500 (12.70) .750 (19.05) 1 2.770 (70.36) 1.059 (26.90)48 40 12 .500 (12.70) .750 (19.05) 1 2.770 (70.36) 1.059 (26.90)49 10 10S, 10SL 10 6 .25

36、0 ( 6.35) .437 (11.10) 2 1.940 (49.28) 1.027 (26.09)50 12 14 14, 14S 14 12 .500 (12.70) .750 (19.05) 2 2.270 (57.66) 1.059 (26.90)51 19 16 16, 16S 16 16 .625 (15.88) .937 (23.80) 2 2.380 (60.45) 1.156 (29.36)52 27 18 18 18 12 .500 (12.70) .750 (19.05) 1 2.270 (57.66) 1.059 (26.90)53 61 N/A N/A N/A 1

37、6 .625 (15.88) .937 (23.80) 1 2.025 (51.44) 1.156 (29.36)54 37 20 20 20 12 .500 (12.70) .750 (19.05) 1 2.270 (57.66) 1.059 (26.90)55 20 .875 (22.23) 1.250 (31.75) 2 2.550 (64.77) 1.375 (34.93)56 N/A 22 22 22 10 .350 ( 8.89) .625 (15.88) 1 2.380 (60.45) 1.027 (26.09)57 16 .625 (15.88) .937 (23.80) 1

38、2.380 (60.45) 1.156 (29.36)58 20 .875 (22.23) 1.250 (31.75) 2 2.550 (64.77) 1.375 (34.93)59 24 24 24 16 .625 (15.88) .937 (23.80) 1 2.380 (60.45) 1.156 (29.36)60 N/A 28 N/A 12 .500 (12.70) .750 (19.05) 1 2.550 (64.77) 1.059 (26.90)AEROSPACE STANDARD AS85049 /9 SHEET 6 OF 9 REV. C CONNECTOR ACCESSORI

39、ES, ELECTRICAL, BACKSHELL, ENVIRONMENTAL, CABLE SEALING, 90, CATEGORY 1A (FOR AS50151 CRIMP, MIL-DTL-26482 SERIES 2, AS81703 SERIES 3, AND MIL-DTL-83723 SERIES III CONNECTORS) TABLE 1 - DIMENSIONS (CONTINUED) DASH NO. D DIA MAX E .125 V THREAD CLASS 2A F MAX G DIA MAX H MAX 47 2.469 (62.71) 1.816 (4

40、6.13) 1.1875-18 UNEF 3.13 (79.50) 3.68 ( 93.47) 48 2.719 (69.06) 1.816 (46.13) 1.1875-18 UNEF 3.88 (98.55) 4.43 (112.52) 49 .734 (18.64) 1.391 (35.33) .750-20 UNEF 2.03 (51.56) .858 (21.79) 2.42 ( 61.47) 50 .984 (24.99) 1.766 (44.86) 1.1875-18 UNEF 2.61 (66.29) 1.218 (30.94) 3.00 ( 76.20) 51 1.112 (

41、28.24) 1.916 (48.67) 1.4375-18 UNEF 2.87 (72.90) 1.468 (37.29) 3.26 ( 82.80) 52 1.218 (30.94) 1.016 (25.81) 1.1875-18 UNEF 1.86 (47.24) 2.25 ( 57.15) 53 1.653 (41.99) 1.166 (29.62) 1.4375-18 UNEF 2.14 (54.36) 2.53 ( 64.26) 54 1.345 (34.16) 1.016 (25.81) 1.1875-18 UNEF 1.86 (47.24) 2.25 ( 57.15) 55 1

42、.345 (34.16) 2.016 (51.21) 1.750-18 UNS 3.14 (79.76) 1.969 (50.01) 3.53 ( 89.66) 56 1.468 (37.29) 1.166 (29.62) 1.000-20 UNEF 2.11 (53.59) 2.50 ( 63.50) 57 1.468 (37.29) 1.166 (29.62) 1.4375-18 UNEF 2.12 (53.85) 2.51 ( 63.75) 58 1.468 (37.29) 2.016 (51.21) 1.750-18 UNS 3.14 (79.76) 1.969 (50.01) 3.5

43、3 ( 89.66) 59 1.593 (40.46) 1.166 (29.62) 1.4375-18 UNEF 2.14 (54.36) 2.53 ( 64.26) 60 1.969 (50.01) 1.266 (32.16) 1.1875-18 UNEF 2.33 (59.18) 2.88 ( 73.15) TABLE 1 - DIMENSIONS (CONTINUED) DASH NO. CONNECTOR SHELL SIZE CLAMPSIZE A (SEE NOTE 6) STYLE B .125 C REF AS81703 SERIES 3 MIL-DTL-26482 SERIE

44、S 2 AS50151 CRIMP MIL-DTL-83723 SERIES III WIRE BUNDLE ACCOMMODATION RANGE MIN MAX 61 N/A N/A 28 N/A 20 .875 (22.23) 1.250 (31.75) 1 2.550 (64.77) 1.375 (34.93) 62 32 24 1.000 (25.40) 1.375 (34.93) 1 2.800 (71.12) 1.500 (38.10) 63 36 20 .875 (22.23) 1.250 (31.75) 1 2.770 (70.36) 1.375 (34.93) 64 28

45、1.250 (31.75) 1.625 (41.28) 1 2.770 (70.36) 1.781 (45.24) 65 40 20 .875 (22.23) 1.250 (31.75) 1 2.770 (70.36) 1.375 (34.93) 66 28 1.250 (31.75) 1.625 (41.28) 1 2.770 (70.36) 1.781 (45.24) 67 44 20 .875 (22.23) 1.250 (31.75) 1 2.770 (70.36) 1.375 (34.93) 68 28 1.250 (31.75) 1.625 (41.28) 1 2.770 (70.

46、36) 1.781 (45.24) 69 48 20 .875 (22.23) 1.250 (31.75) 1 2.770 (70.36) 1.375 (34.93) 70 28 1.250 (31.75) 1.625 (41.28) 1 2.770 (70.36) 1.781 (45.24) 71 7 12 12, 12S 12 10 .350 ( 8.89) .625 (15.88) 2 2.100 (53.34) 1.027 (26.09) 72 27 18 18 18 16 .625 (15.88) .937 (23.80) 2 2.380 (60.45) 1.156 (29.36)

47、73 N/A 24 24 24 20 .875 (22.23) 1.250 (31.75) 2 2.550 (64.77) 1.375 (34.93) 74 12 14 14, 14S 14 4 .125 ( 3.18) .312 ( 7.92) 1 2.010 (51.05) 1.027 (26.09) 75 19 16 16, 16S 16 4 .125 ( 3.18) .312 ( 7.92) 1 2.100 (53.34) 1.027 (26.09) AEROSPACE STANDARD AS85049 /9 SHEET 7 OF 9 REV. C CONNECTOR ACCESSOR

48、IES, ELECTRICAL, BACKSHELL, ENVIRONMENTAL, CABLE SEALING, 90, CATEGORY 1A (FOR AS50151 CRIMP, MIL-DTL-26482 SERIES 2, AS81703 SERIES 3, AND MIL-DTL-83723 SERIES III CONNECTORS) TABLE 1 - DIMENSIONS (CONTINUED) DASH NO. D DIA MAX E .125 V THREAD CLASS 2A F MAX G DIA MAX H MAX 61 1.969 (50.01) 1.266 (32.16) 1.750-18 UNS 2.39 (60.71) 2.94 (74.68) 62 2.219 (56.36) 1.616 (41.05) 2.000-18 UNS 2.86 (72.64) 3.41 (86.61) 63 2.469 (62.71) 1.816 (46.13) 1.750-18 UNS 3.13 (79.50) 3.68

展开阅读全文
相关资源
猜你喜欢
  • ASTM A615 A615M-2009a Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement《变形和普通钢筋混凝土碳钢钢筋的标准规范》.pdf ASTM A615 A615M-2009a Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement《变形和普通钢筋混凝土碳钢钢筋的标准规范》.pdf
  • ASTM A615 A615M-2009b Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement《变形和普通钢筋混凝土碳钢钢筋的标准规范》.pdf ASTM A615 A615M-2009b Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement《变形和普通钢筋混凝土碳钢钢筋的标准规范》.pdf
  • ASTM A615 A615M-2012 Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement 《变形和普通钢筋混凝土碳钢钢筋的标准规格》.pdf ASTM A615 A615M-2012 Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement 《变形和普通钢筋混凝土碳钢钢筋的标准规格》.pdf
  • ASTM A615 A615M-2013 Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement《混凝土钢筋用变形和普通钢筋的标准规格》.pdf ASTM A615 A615M-2013 Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement《混凝土钢筋用变形和普通钢筋的标准规格》.pdf
  • ASTM A615 A615M-2014 Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement《混凝土钢筋用变形和普通钢筋的标准规格》.pdf ASTM A615 A615M-2014 Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement《混凝土钢筋用变形和普通钢筋的标准规格》.pdf
  • ASTM A615 A615M-2015 Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement《混凝土钢筋用变形和普通碳素钢筋的标准规格》.pdf ASTM A615 A615M-2015 Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement《混凝土钢筋用变形和普通碳素钢筋的标准规格》.pdf
  • ASTM A615 A615M-2015a Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement《混凝土钢筋用变形和普通碳素钢筋的标准规格》.pdf ASTM A615 A615M-2015a Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement《混凝土钢筋用变形和普通碳素钢筋的标准规格》.pdf
  • ASTM A615 A615M-2015ae1 Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement《混凝土钢筋用变形和普通碳钢棒的标准规格》.pdf ASTM A615 A615M-2015ae1 Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement《混凝土钢筋用变形和普通碳钢棒的标准规格》.pdf
  • ASTM A615 A615M-2016 Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement《混凝土钢筋用变形和普通碳钢棒的标准规格》.pdf ASTM A615 A615M-2016 Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement《混凝土钢筋用变形和普通碳钢棒的标准规格》.pdf
  • 相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > 其他

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1