1、 SAE Technical Standards Board Rules provide that: “This report is published by SAE to advance the state of technical and engineering sciences. The use of this report is entirely voluntary, and its applicability and suitability for any particular use, including any patent infringement arising there
2、from, is the sole responsibility of the user.” SAE reviews each technical report at least every five years at which time it may be revised, reaffirmed, stabilized, or cancelled. SAE invites your written comments and suggestions. Copyright 2013 SAE International All rights reserved. No part of this p
3、ublication may be reproduced, stored in a retrieval system or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of SAE. TO PLACE A DOCUMENT ORDER: Tel: 877-606-7323 (inside USA and Canada) Tel: +1 724-776-497
4、0 (outside USA) Fax: 724-776-0790 Email: CustomerServicesae.org SAE WEB ADDRESS: http:/www.sae.org SAE values your input. To provide feedback on this Technical Report, please visit http:/www.sae.org/technical/standards/J1075_201303 SURFACE VEHICLE STANDARD J1075 MAR2013 Issued 1978-04 Reaffirmed 201
5、3-03 Superseding J1075 NOV2007 Sound Measurement - Construction Site RATIONALE SAE J1075 is being reaffirmed due to its continued value as a standardized test method for measuring the non-specific noise levels around the perimeter of a work site. The methods and technology used within this test stan
6、dard are unchanged and are not anticipated to change in the near future. SAE J1075 Reaffirmed MAR2013 Page 2 of 9 SAE J1075 Reaffirmed MAR2013 Page 3 of 9 SAE J1075 Reaffirmed MAR2013 Page 4 of 9 SAE J1075 Reaffirmed MAR2013 Page 5 of 9 SAE J1075 Reaffirmed MAR2013 Page 6 of 9 SAE J1075 Reaffirmed MAR2013 Page 7 of 9 SAE J1075 Reaffirmed MAR2013 Page 8 of 9 SAE J1075 Reaffirmed MAR2013 Page 9 of 9 REAFFIRMED BY THE SAE OPTC3, LIGHTING AND SOUND COMMITTEE
