1、SAE Technical Standards Board Rules provide that: “This report is published by SAE to advance the state of technical and engineering sciences. The use of this report is entirelyvoluntary, and its applicability and suitability for any particular use, including any patent infringement arising therefro
2、m, is the sole responsibility of the user.”SAE reviews each technical report at least every five years at which time it may be reaffirmed, revised, or cancelled. SAE invites your written comments and suggestions.Copyright 2007 SAE InternationalAll rights reserved. No part of this publication may be
3、reproduced, stored in a retrieval system or transmitted, in any form or by any means, electronic, mechanical, photocopying,recording, or otherwise, without the prior written permission of SAE.TO PLACE A DOCUMENT ORDER: Tel: 877-606-7323 (inside USA and Canada)Tel: 724-776-4970 (outside USA)Fax: 724-
4、776-0790Email: CustomerServicesae.orgSAE WEB ADDRESS: http:/www.sae.orgSURFACEVEHICLESTANDARDJ1109REAF.AUG2007Issued 1975-05Reaffirmed 2007-08Superseding J1109 DEC2002Component NomenclatureArticulated Log Skidder, Rubber-Tired1. ScopeThis SAE Standard includes names of major components and parts par
5、ticular to this type of machine.Illustrations used here are not intended to include all existing commercial machines, or to be exactlydescriptive of any particular machine. They have been chosen to describe the principles to be used inapplying this document (see Figures 1 and 2).1. Engine2. Sweep3.
6、Operator Enclosure4. Seat5. Rear Frame6. Winch7. Arch8. Fairlead8(a) Main Fairlead Roller8(b) Auxiliary Fairlead Rollers9. Tire10. Rim11. Axle12. Driveline13. Steering Cylinder14. Front Frame15. Blade Arm116. Blade17. Decking Lug18. Blade Cylinder19. Radiator20. Log Bumper1. See NomenclatureDozerSAE
7、 J729. This part, depending upon its shape, could be called: a. Push Beamb. C-Framec. Angling Strutd. Push FrameSAE J1109 Reaffirmed AUG2007-2-FIGURE 1SIDE VIEW LOG SKIDDERFIGURE 2TOP VIEW LOG SKIDDER1.1 RationaleThis document has been reaffirmed to comply with the SAE 5-Year Review policy.2. Refere
8、nces2.1 Applicable PublicationThe following publication forms a part of the specification to the extent specifiedherein. Unless otherwise indicated the latest revision of SAE publications shall apply.2.1.1 SAE PUBLICATIONAvailable from SAE, 400 Commonwealth Drive, Warrendale, PA 15096-0001, Tel: 877
9、606-7323 (inside USA and Canada) or 724-776-4970 (outside USA), www.sae.org.SAE J729Nomenclature and Specification DefinitionsDozersSAE J1109 Reaffirmed AUG2007-3-2.2 Related PublicationsThe following publications are provided for information purposes only and are not arequired part of this documen
10、t.2.2.1 SAE PUBLICATIONSAvailable from SAE, 400 Commonwealth Drive, Warrendale, PA 15096-0001, Tel:877-606-7323 (inside USA and Canada) or 724-776-4970 (outside USA), www.sae.org.SAE J1110Specification DefinitionsArticulated, Rubber-Tired Log SkiddersSAE J1111Component NomenclatureSkidder-GrappleSAE J1112Specification DefinitionsSkidder-Grapple PREPARED BY THE SAE MACHINE TECHNICAL COMMITTEE SC4FORESTRY AND LOGGING EQUIPMENT
