1、_ SAE Technical Standards Board Rules provide that: “This report is published by SAE to advance the state of technical and engineering sciences. The use of this report is entirely voluntary, and its applicability and suitability for any particular use, including any patent infringement arising there
2、from, is the sole responsibility of the user.” SAE reviews each technical report at least every five years at which time it may be revised, reaffirmed, stabilized, or cancelled. SAE invites your written comments and suggestions. Copyright 2017 SAE International All rights reserved. No part of this p
3、ublication may be reproduced, stored in a retrieval system or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of SAE. TO PLACE A DOCUMENT ORDER: Tel: 877-606-7323 (inside USA and Canada) Tel: +1 724-776-497
4、0 (outside USA) Fax: 724-776-0790 Email: CustomerServicesae.org SAE WEB ADDRESS: http:/www.sae.org SAE values your input. To provide feedback on this Technical Report, please visit http:/standards.sae.org/J1942/1_201712 SURFACE VEHICLE INFORMATION REPORT J1942 -1 DEC2017 Issued 1993-06 Revised 2017-
5、12 Superseding J1942-1 DEC2016 Qualified Hoses for Marine Applications RATIONALE New additions to hose listings. FOREWORD It should be noted that the manufacturers and products listed could possibly change. Document is constantly under revision to include new manufacturers and products. 1. SCOPE The
6、 following list consists of hose data provided as of December 2017, and is for convenience in determining acceptability of nonmetallic flexible hose assemblies intended for usage under 46 CFR 56.60-25. Where the maximum allowable working pressure (MAWP) or type of fitting is not specified, use the m
7、anufacturers recommended MAWP or type of fitting. This list has been compiled by SAE Staff from information provided by the manufacturers whose product listings appear in this document. Manufacturers wishing to list their products in this document shall: a. Successfully test their hose to the requir
8、ements of SAE J1942, Table 1. b. Submit a letter of certification to the SAE J1942 test requirements for each specific type of hose tested (see sample table on page 4) along with the test results. All sizes should be included in the same letter which must also include all of the information necessar
9、y to make a SAE J1942-1 listing. c. The SAE will review the letter and may, at their discretion, request to see further test results. A copy of the submittal letter marked “Accepted for Listing” will be returned to the applicant upon approval. d. The cutoff date for inclusion of a hose listing in th
10、e annual SAE Handbook is September 30, of the preceding year. However, listed hoses may be used on vessels as soon as the “Accepted for Listing” letter is issued by the SAE. Next publication of this listing is scheduled to take place in December 2018. If you wish to include additional hoses in the 2
11、018 publication of this list, please submit your Certified List to SAE by September 2018. SAE INTERNATIONAL J1942- 1 DEC2017 Page 2 of 79 2. REFERENCES 2.1 Applicable Documents The following publications form a part of this specification to the extent specified herein. Unless otherwise indicated, th
12、e latest issue of SAE publications shall apply. 2.1.1 SAE Publications Available from SAE International, 400 Commonwealth Drive, Warrendale, PA 15096-0001, Tel: 877-606-7323 (inside USA and Canada) or +1 724-776-4970 (outside USA), www.sae.org. SAE J1942 Hose and Hose Assemblies for Marine Applicati
13、ons 3. LISTING INSTRUCTIONS 3.1 Column 1 - Hose Number List each complete hose supplier catalog number, including the size (one line listing for a series of hoses will no longer be acceptable.) 3.2 Column 2 - Application Code Will show an HF, F, H, VW or NVW. For HF and F listed hoses the type of fi
14、re resistance test (Type A or Type B) in accordance with SAE J1942 shall be listed. Type B hoses can be supplied for Type A applications, but Type A hoses cannot be supplied for Type B applications. Hoses with an F and H rating, at the same working pressure, should be rated HF, good for all services
15、. If a hose is qualified for use in both an F and H application, but at different working pressures, or requires a fire sleeve for either application, it must be listed twice, once for F and once for H, with the appropriate information for each listing. Hoses listed as F can be used for VW and NVW a
16、pplications and do not require a separate listing for VW and NVW. Hoses listed as H can also be used for VW and NVW applications and do not require a separate listing for VW and NVW. Hoses listed as VW can also be used for NVW applications (at 50 psi). NVW listings are for NVW listings only (refer t
17、o Table 1). Because of the multiple uses for F, H and VW hoses, no hose has to be listed more than twice. 3.3 Column 3 - Hose I.D. The actual hose I.D. shall be shown in fractions. 3.4 Column 4 - Maximum Allowable Working Pressure Shall be shown in PSI. VW applications can use F and H hoses at the p
18、ressures shown in the listing or their own listed pressure. NVW applications are all rated at 50 psi maximum. 3.5 Column 5 - Fittings Shall show the catalog number of each fitting style used on each hose size. SAE INTERNATIONAL J1942- 1 DEC2017 Page 3 of 79 3.6 Column 6 - Fire Sleeve Show the number
19、 of the appropriate fire sleeve if one is required. A dash () indicates that a fire sleeve is not required. 3.7 Column 7 - Listing Date For all hoses now on the USCG list, this date will be the date that SAE J1942-1 is printed (The USCG letter date will be dropped). Future listings will be the date
20、the hose is added to the list by SAE. 4. NOTES 4.1 Revision Indicator A change bar (l) located in the left margin is for the convenience of the user in locating areas where technical revisions, not editorial changes, have been made to the previous issue of this document. An (R) symbol to the left of
21、 the document title indicates a complete revision of the document, including technical revisions. Change bars and (R) are not used in original publications, nor in documents that contain editorial changes only. SAE INTERNATIONAL J1942- 1 DEC2017 Page 4 of 79 Table 1 - Sample listing page 1 2 3 4 6 7
22、 Hose Applic. Hose MAWP 5 Fire Listing Number Code ID (PSI) Fittings Sleeve Date E704 H 1/4 3000 HF, EA, CH 04JAN93 E705 H 5/16 2750 HU, EA, CH E706 H 3/8 2500 HU, EA, CH 04JAN93 E708 H 1/2 2250 HU, CH 04JAN93 M716 H 1 4000 HW 04JAN93 M720 H 1-1/4 3000 HW 04JAN93 M724 H 1-1/4 2500 HW 04JAN93 G104 HF
23、 Type A 1/4 3000 GL, EC 04JAN93 G105 HF Type A 5/16 2500 GL, EC 04JAN93 G106 HF Type A 3/8 2500 GL, EC 04JAN93 G108 HF Type A 1/2 2250 GL, EC 04JAN93 Y904 H 3/16 3000 BC, BN 04JAN93 Y905 H 1/4 3000 BC, BN 04JAN93 Y906 H 5/16 2250 BC, BN 04JAN93 Y910 H 1/2 1750 BC, BN 04JAN93 Y904 F Type B 3/16 300 B
24、C, BN 14372 04JAN93 Y905 F Type B 1/4 300 BC, BN 14372 04JAN93 Y906 F Type B 5/16 300 BC, BN 14372 04JAN93 N256-2 VW 2 400 H-620 04JAN93 N256-3 VW 3 400 H-630 04JAN93 N256-4 VW 4 400 H-640 04JAN93 N-1401-12 NVW 3/4 50 H-132 04JAN93 N-1401-16 NVW 1 50 H-140 04JAN93 N-1401-20 NVW 1-1/4 50 H-146 04JAN9
25、3 SAE INTERNATIONAL J1942- 1 DEC2017 Page 5 of 79 1. Alfagomma Hydraulic S.p.A. Via Enrico Mattei, 6 64020 Castelnuovo Vomano (TE) Italy Ph: +39.0861.448.1 Fax: +39.0861.57.106 Table 2 - Alfagomma Hydraulic S.p.A listing Hose Applic. Hose MAWP Fire Listing Number Code ID (PSI) Fittings Sleeve Date R
26、1 HF 1/4 3.270 H1100204-04 H1200102-04 16NOV15 R1 HF 5/16 3.120 H1100204-05 H1200202-05 16NOV15 R1 HF 3/8 2.610 H1100204-06 H1200202-06 H1200212-06 16NOV15 R1 HF 2.320 H1100204-08 H1200202-08 H1200212-08 - 16NOV15 R1 HF 5/8 1.890 H1100204-10 H1200202-10 16NOV15 R1 HF 1.530 H1100204-12 H1200202-12 16
27、NOV15 R1 HF 1 1.280 H1100204-16 H1200202-16 16NOV15 R1 HF 1.1/4 920 H1100104-20 H1200102-20 16NOV15 R1 HF 1.1/2 730 H1100104-24 H1200202-24 16NOV15 R2 HF 5.800 H1100204-04 H1200102-04 16NOV15 R2 HF 5/16 5.000 H1100204-05 H1200202-05 16NOV15 R2 HF 3/8 4.800 H1100204-06 H1200202-06 H1200212-06 16NOV15
28、 R2 HF 4.000 H1100204-08 H1200202-08 H1200212-08 16NOV15 R2 HF 5/8 3.630 H1100204-10 H1200202-10 16NOV15 R2 HF 3.120 H1100204-12 H1200202-12 16NOV15 R2 HF 1 2.400 H1100204-16 H1200202-16 16NOV15 R2 HF 1.1/4 1.820 H1100204-20 H1200102-20 16NOV15 R2 HF 1.1/2 1.310 H1100204-24 H1200202-24 16NOV15 SAE I
29、NTERNATIONAL J1942- 1 DEC2017 Page 6 of 79 Table 2 - Alfagomma Hydraulic S.p.A listing (continued) Hose Applic. Hose MAWP Fire Listing Number Code ID (PSI) Fittings Sleeve Date R2 HF 2 1.160 H1100204-32 H1200202-32 16NOV15 4SP HF 6.550 H1100404-04 16NOV15 4SP HF 3/8 6.450 H1100404-06 H1400200-06 16N
30、OV15 4SP HF 6.000 H1100404-08 H1400200-08 16NOV15 4SP HF 5/8 5.000 H1100404-10 H1400200-10 16NOV15 4SP HF 5.510 H1100404-12 H1100204-12 H1400200-12 16NOV15 4SP HF 1 4.640 H1100204-16 H1400200-16 16NOV15 4SH HF 6.000 H1400200-12 16NOV15 4SH HF 1 5.500 H1400200-16 16NOV15 4SH HF 1.1/4 5.000 H1400200-2
31、0 16NOV15 4SH HF 1.1/2 4.200 H1400200-24 16NOV15 R12 HF 3/8 4.000 H1100404-06 H1200204-06 16NOV15 R12 HF 4.000 H1100404-08 H1200204-08 H1400200-08 16NOV15 R12 HF 5/8 4.000 H1100204-10 H1200204-10 H1400200-10 16NOV15 R12 HF 4.000 H1100204-12 H1200204-12 H1400200-12 16NOV15 R12 HF 1.1/4 3.000 H1100204
32、-20 H1200204-20 H1400200-20 16NOV15 R12 HF 1.1/2 2.500 H1100204-24 H1400200-24 16NOV15 R12 HF 2 2.500 H1100204-32 H1400200-32 16NOV15 R12 HF 2.1/2 2.030 16NOV15 R13 HF 5.000 H1400200-12 16NOV15 R13 HF 1 5.500 H1400200-16 16NOV15 R13 HF 1.1/4 5.000 H1400301-20 16NOV15 R13 HF 1.1/2 5.000 H1400301-24 1
33、6NOV15 R13 HF 2 5.000 H1400301-32 H1T00600-32 16NOV15 R13 HF 2.1/2 5.000 16NOV15 SAE INTERNATIONAL J1942- 1 DEC2017 Page 7 of 79 2. Anchor Coupling Inc. 5520 13th Street Menominee, MI 49858 Ph: (906) 863-2671 Fax: (906) 863-3242 Table 3 - Anchor Coupling Inc. listing Hose Applic. Hose MAWP Fire List
34、ing Number Code ID (PSI) Fittings Sleeve Date 4 FND H 1/4 2750 MN 28APR03 6 FND H 3/8 2250 MN 28APR03 8 FND H 1/2 2000 MN 28APR03 10 FND H 5/8 1500 MN 28APR03 12 FND H 3/4 1250 MN 28APR03 16 FND H 1 1000 MN 28APR03 20 FND H 1-1/4 625 MN 28APR03 24 FND H 1-1/2 500 MN 28APR03 32 FND H 2 375 MN 28APR03
35、 4 CAT 716 H 1/4 2750 MN 28APR03 6 CAT 716 H 3/8 2250 MN 28APR03 8 CAT 716 H 1/2 2000 MN 28APR03 10 CAT 716 H 5/8 1500 MN 28APR03 12 CAT 716 H 3/4 1250 MN 28APR03 16 CAT 716 H 1 1000 MN 28APR03 20 CAT 716 H 1-1/4 625 MN 28APR03 24 CAT 716 H 1-1/2 500 MN 28APR03 32 CAT 716 H 2 375 MN 28APR03 4 FND F
36、Type A 1/4 825 MN 28APR03 6 FND F Type A 3/8 675 MN 28APR03 8 FND F Type A 1/2 600 MN 28APR03 10 FND F Type A 5/8 450 MN 28APR03 12 FND F Type A 3/4 375 MN 28APR03 16 FND F Type A 1 300 MN 28APR03 20 FND F Type A 1-1/4 188 MN 28APR03 24 FND F Type A 1-1/2 150 MN 28APR03 32 FND F Type A 2 113 MN 28AP
37、R03 4 CAT 716 F Type A 1/4 825 MN 28APR03 6 CAT 716 F Type A 3/8 675 MN 28APR03 8 CAT 716 F Type A 1/2 600 MN 28APR03 10 CAT 716 F Type A 5/8 450 MN 28APR03 12 CAT 716 F Type A 3/4 375 MN 28APR03 16 CAT 716 F Type A 1 300 MN 28APR03 20 CAT 716 F Type A 1-1/4 188 MN 28APR03 24 CAT 716 F Type A 1-1/2
38、150 MN 28APR03 32 CAT 716 F Type A 2 113 MN 28APR03 SAE INTERNATIONAL J1942- 1 DEC2017 Page 8 of 79 Table 3 - Anchor Coupling Inc. listing (continued) Hose Applic. Hose MAWP Fire Listing Number Code ID (PSI) Fittings Sleeve Date 4 CND H 1/4 5000 MN 28APR03 6 CND H 3/8 4000 MN 28APR03 8 CND H 1/2 350
39、0 MN 28APR03 10CFND H 5/8 2750 MN 28APR03 12 CND H 3/4 2250 MN 28APR03 16 CND H 1 2000 MN 28APR03 20 CND H 1-1/4 1625 MN 28APR03 24 CND H 1-1/2 1250 MN 28APR03 32 CND H 2 1125 MN 28APR03 4 CAT 294 H 1/4 5000 MN 28APR03 6 CAT 294 H 3/8 4000 MN 28APR03 8 CAT 294 H 1/2 3500 MN 28APR03 10 CAT 294 H 5/8
40、2750 MN 28APR03 12 CAT 294 H 3/4 2250 MN 28APR03 16 CAT 294 H 1 2000 MN 28APR03 20 CAT 294 H 1-1/4 1625 MN 28APR03 24 CAT 294 H 1-1/2 1250 MN 28APR03 32 CAT 294 H 2 1125 MN 28APR03 12 SWH VW 3/4 50 MN 28APR03 16 SWH VW 1 50 MN 28APR03 20 SWH VW 1-1/4 50 MN 28APR03 24 SWH VW 1-1/2 50 MN 28APR03 32 SW
41、H VW 2 50 MN 28APR03 12 CAT 844 VW 3/4 50 MN 28APR03 16 CAT 844 VW 1 50 MN 28APR03 20 CAT 844 VW 1-1/4 50 MN 28APR03 24 CAT 844 VW 1-1/2 50 MN 28APR03 32 CAT 844 VW 2 50 MN 28APR03 SAE INTERNATIONAL J1942- 1 DEC2017 Page 9 of 79 3. Dunlop Hyflex P.O. Box 87 Centurion Way Farington, Leyland PR25 3WL
42、Ph: +44 (0) 1772-421704 Fax: +44 (0) 1772-457749 Table 4 - Dunlop Hyflex listing Hose Applic. Hose MAWP Fire Listing Number Code ID (PSI) Fittings Sleeve Date 122T-04 H 1/4 3260 50/11 & G-Range 26SEP06 122T-05 H 5/16 3115 50/11 & G-Range 26SEP06 122T-06 H 3/8 2610 50/11 & G-Range 26SEP06 122T-08 H 1
43、/2 2320 50/11 & G-Range 26SEP06 122T-10 H 5/8 1885 50/11 & G-Range 26SEP06 122T-12 H 3/4 1520 50/11 & G-Range 26SEP06 122T-16 H 1 1275 50/11 & G-Range 26SEP06 122T-20 H 1-1/4 910 50/11 & G-Range 26SEP06 122T-24 H 1-1/2 725 50/11 & G-Range 26SEP06 122T-32 H 2 580 50/11 & G-Range 26SEP06 222T-04 H 1/4
44、 5800 50/22 & G-Range 26SEP06 222T-05 H 5/16 5075 50/22 & G-Range 26SEP06 222T-06 H 3/8 4785 50/22 & G-Range 26SEP06 222T-08 H 1/2 3985 50/22 & G-Range 26SEP06 222T-10 H 5/8 3625 50/22 & G-Range 26SEP06 222T-12 H 3/4 3115 50/22 & G-Range 26SEP06 222T-16 H 1 2390 50/22 & G-Range 26SEP06 222T-20 H 1-1
45、/4 1810 50/22 & G-Range 26SEP06 222T-24 H 1-1/2 1305 50/22 & G-Range 26SEP06 222T-32 H 2 1160 50/22 & G-Range 26SEP06 241T-04 H 1/4 6525 50/11 & G-Range 26SEP06 241T-05 H 5/16 5800 50/11 & G-Range 26SEP06 241T-06 H 3/8 5075 50/11 & G-Range 26SEP06 241T-08 H 1/2 4495 50/11 & G-Range 26SEP06 241T-10 H
46、 5/8 4060 50/11 & G-Range 26SEP06 241T-12 H 3/4 4060 50/11 & G-Range 26SEP06 241T-16 H 1 3260 50/11 & G-Range 26SEP06 3SPT-06 H 3/8 7250 50/52 26SEP06 3SPT-08 H 1/2 6820 50/52 26SEP06 3SPT-10 H 5/8 5950 50/52 26SEP06 3SPT-12 H 3/4 5440 50/52 26SEP06 3SPT-16 H 1 4750 50/52 26SEP06 3SPT-20 H 1-1/4 348
47、0 50/52 26SEP06 712L-06 H 3/8 4000 56/56 26SEP06 712L-08 H 1/2 4000 56/56 26SEP06 712L-10 H 5/8 4000 56/56 26SEP06 712L-12 H 3/4 4000 56/56 26SEP06 SAE INTERNATIONAL J1942- 1 DEC2017 Page 10 of 79 Table 4 - Dunlop Hyflex listing (continued) Hose Applic. Hose MAWP Fire Listing Number Code ID (PSI) Fi
48、ttings Sleeve Date 712L-16 H 1 4000 56/56 26SEP06 712L-20 H 1-1/4 3000 56/56 26SEP06 712L-24 H 1-1/2 2500 56/56 26SEP06 712L-32 H 2 2500 56/56 26SEP06 713L-12 H 3/4 5000 19/19 26SEP06 713L-16 H 1 5000 19/19 26SEP06 713L-20 H 1-1/4 5000 19/19 & IT 26SEP06 713L-24 H 1-1/2 5000 19/19 & IT 26SEP06 713L-32 H 2 5000 19/19 & IT 26SEP06 730L-04 H 1/4 6960 56/56 26SEP0
