1、SAE Technical Standards Board Rules provide that: “This report is published by SAE to advance the state of technical and engineering sciences. The use of this report is entirelyvoluntary, and its applicability and suitability for any particular use, including any patent infringement arising therefro
2、m, is the sole responsibility of the user.”SAE reviews each technical report at least every five years at which time it may be reaffirmed, revised, or cancelled. SAE invites your written comments and suggestions.TO PLACE A DOCUMENT ORDER: +01 724-776-4970 FAX: +01 724-776-0790SAE WEB ADDRESS http:/w
3、ww.sae.orgCopyright 2001 Society of Automotive Engineers, Inc.All rights reserved. Printed in U.S.A.SURFACEVEHICLE400 Commonwealth Drive, Warrendale, PA 15096-0001RECOMMENDEDPRACTICESubmitted for recognition as an American National StandardJ33REAF.DEC2000Issued 1973-03Reaffirmed 2000-12Superseding J
4、33 DEC1991Snowmobile Definitions and NomenclatureGeneralForewordThis Document has not changed other than to put it into the new SAE Technical Standards BoardFormat. Defintions changed to Section 3. All other section numbers have changed accordingly.1. Scope and PurposeThis SAE Recommended Practice s
5、ets forth accepted definitions and terminology ofmajor components and parts peculiar to snowmobiles.Illustrations have been selected to identify functional characteristics and to identify common mechanisms.They are not intended to show all existing commercial machines or to be exactly descriptive of
6、 any particularmachine. These criteria were prepared to facilitate clear understanding and promote uniformity in snowmobilenomenclature.2. References2.1 Applicable PublicationThe following publication forms a part of this specification to the extent specifiedherein. The latest issue of SAE publicati
7、ons shall apply.2.1.1 SAE PUBLICATIONAvailable from SAE, 400 Commonwealth Drive, Warrendale, PA 15096-0001.SAE J1038Recommendations for Childrens Snowmobile3. Definitions3.1 SnowmobileA self-propelled vehicle intended for off-road travel primarily on snow, having a curb weight ofnot more than 450 kg
8、 (1000 lb), driven by a track or tracks in contact with the snow, steered by a ski or skis incontact with the snow, with the following special classes:3.1.1 CLASS I-COMPETITION SNOWMOBILEA snowmobile intended only for competition as stated and identifiedpublicly by the manufacturer.3.1.2 CLASS II-CH
9、ILDRENS SNOWMOBILEA snowmobile intended only for use by children, as stated and identifiedpublicly by the manufacturer. For a more detailed definition, see SAE J1038.3.2 Operation WeightThe total weight of a snowmobile including a full load of fuel, oil, coolant, tool kit (suppliedby manufacturer),
10、and an 80 kg (175 lb) operator.Copyright SAE International Provided by IHS under license with SAENot for ResaleNo reproduction or networking permitted without license from IHS-,-SAE J33 Reaffirmed DEC2000-2-3.3 Curb WeightThe total weight of a snowmobile including a full load of fuel, oil, coolant,
11、and tool kit (suppliedby manufacturer), but without any occupants or cargo.3.4 Unladen WeightThe weight of a snowmobile without load, fuel, and oil, but comprising of all other materialsnecessary for its operation.3.5 Flotation Area (Bearing Area)The projection in a horizontal plane of the area on t
12、he surface of the trackand skis which contact the snow. To account for machine penetration into snow, the projection plane islocated 75 mm (3 in) above a nonyielding horizontal surface supporting the snowmobile while in a curb weightcondition. (See side view Figure 1.)3.6 Snowmobile CutterA sleigh d
13、esigned to be drawn behind a snowmobile.4. Snowmobile Dimensional DefinitionsThe dimensions listed are defined by Figure 1 and are to be takenwith the snowmobile in an unladen weight condition on any unyielding horizontal surface, with the followingexceptions:4.1 Overall LengthThe horizontal distanc
14、e from the foremost part of the snowmobile, to include the bumper andski or ski handles, to the rearmost part of the snowmobile, to include the bumper or other fixed attachments.4.2 Overall HeightThe vertical distance from any unyielding horizontal surface on which the snowmobile, in anunladen weigh
15、t condition, rests to the topmost fixed part of the unladen snowmobile, including the windshield.4.3 Overall WidthThe horizontal dimension of the minimum aperture through which the snowmobile can pass.4.4 Driver PositionThe seated, forward-facing position which is necessary to operate the controls u
16、nder normaloperating conditions.4.5 Passenger Position (if provided)The seated, forward-facing position in the area in which adequatehandgrips have been provided.5. NomenclatureThe terms listed as follows are illustrated in Figure 2.1. Steering Control (Handlebar)2. Console3. Headlight Hi-Lo Beam Sw
17、itch4. Emergency Stop Switch (Electrical cut-off for engine ignition)5. Throttle Control (Lever type)6. Manual Starter Handle7. Ski Wear Rod, Wear Bar (Reduces ski wear and greatly improves directional control)8. Suspension (Slider and/or bogie wheel types)9. Track (Cleated or moulded, propels vehic
18、le)10. Snow Flap (Deflects snow and debris released by the rotating track)11. Hitch12. Taillight/Brake Light13. Reflectors/Side Marker Lights14. Vehicle Identification Number (Right side of vehicle)15. Reflectors/Side Marker Lights16. Running Board and Footrest17. Front Bumper18. Headlight or Headla
19、mp19. Windshield20. Brake Control21. Handlebar GripCopyright SAE International Provided by IHS under license with SAENot for ResaleNo reproduction or networking permitted without license from IHS-,-SAE J33 Reaffirmed DEC2000-3-22. Seat23. Passenger Hand Grips (Not used on all machines)24. Rear Bumpe
20、r/Lift Handle (Not used on all machines)25. Tunnel or Frame26. Nose Pan or Belly Pan27. Hood, Cowl, or Shroud28. Ski29. Ski Suspension (Leafspring type)30. Ski Shock Absorber (Not used on all machines)31. Ski Spindle or Ski Leg32. Ski Handle or TipCopyright SAE International Provided by IHS under li
21、cense with SAENot for ResaleNo reproduction or networking permitted without license from IHS-,-SAE J33 Reaffirmed DEC2000-4-FIGURE 1SNOWMOBILE DIMENSIONAL DEFINITIONSCopyright SAE International Provided by IHS under license with SAENot for ResaleNo reproduction or networking permitted without licens
22、e from IHS-,-SAE J33 Reaffirmed DEC2000-5-FIGURE 2NOMENCLATURE POINTSPREPARED BY THE SAE SNOWMOBILE COMMITTEECopyright SAE International Provided by IHS under license with SAENot for ResaleNo reproduction or networking permitted without license from IHS-,-SAE J33 Reaffirmed DEC2000RationaleNot appli
23、cable.Relationship of SAE Standard to ISO StandardNot applicable.ApplicationThis SAE Recommended Practice sets forth accepted definitions and terminology of majorcomponents and parts peculiar to snowmobiles.Illustrations have been selected to identify functional characteristics and to identify commo
24、nmechanisms. They are not intended to show all existing commercial machines or to be exactlydescriptive of any particular machine. These criteria were prepared to facilitate clear understanding andpromote uniformity in snowmobile nomenclature.Reference SectionSAE J1038Recommendations for Childrens SnowmobileDeveloped by the SAE Snowmobile CommitteeCopyright SAE International Provided by IHS under license with SAENot for ResaleNo reproduction or networking permitted without license from IHS-,-
