1、 SAE Technical Standards Board Rules provide that: “This report is published by SAE to advance the state of technical and engineering sciences. The use of this report is entirely voluntary, and its applicability and suitability for any particular use, including any patent infringement arising there
2、from, is the sole responsibility of the user.” SAE reviews each technical report at least every five years at which time it may be revised, reaffirmed, stabilized, or cancelled. SAE invites your written comments and suggestions. Copyright 2013 SAE International All rights reserved. No part of this p
3、ublication may be reproduced, stored in a retrieval system or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of SAE. TO PLACE A DOCUMENT ORDER: Tel: 877-606-7323 (inside USA and Canada) Tel: +1 724-776-497
4、0 (outside USA) Fax: 724-776-0790 Email: CustomerServicesae.org SAE WEB ADDRESS: http:/www.sae.org SAE values your input. To provide feedback on this Technical Report, please visit http:/www.sae.org/technical/standards/J493_201302 SURFACE VEHICLE STANDARD J493 FEB2013 Issued 1915-01 Stabilized 2013-
5、02 Superseding J493 JUN1961 Rod Ends and Clevis Pins RATIONALE Current requirements for Rod Ends and Clevis Pins have been determined to contain stable technology that is not dynamic in nature. The documents listed in 2.1.1 are not the correct references for the SAE 1010 and SAE 1111 steels identifi
6、ed in 3.1. For the current requirements of SAE 1010 and SAE 1111 steels see AISI C1010 and AISI B1111 steels. STABILIZED NOTICE This document has been declared “Stabilized“ by the SAE Fasteners Committee and will no longer be subjected to periodic reviews for currency. Users are responsible for veri
7、fying references and continued suitability of technical requirements. Newer technology may exist. Copyright SAE International Provided by IHS under license with SAENot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SAE J493 Stabilized FEB2013 Page 1 of 3 Copyright SAE
8、 International Provided by IHS under license with SAENot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SAE J493 Stabilized FEB2013 Page 2 of 3 Copyright SAE International Provided by IHS under license with SAENot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SAE J493 Stabilized FEB2013 Page 3 of 3 STABILIZED BY THE SAE FASTENERS COMMITTEE Copyright SAE International Provided by IHS under license with SAENot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
