SAE J 2608-2012 Off Throttle Steering Capabilities of Personal Watercraft《私人喷气艇的关闭油门转向能力》.pdf

上传人:deputyduring120 文档编号:1027466 上传时间:2019-03-24 格式:PDF 页数:5 大小:251.79KB
下载 相关 举报
SAE J 2608-2012 Off Throttle Steering Capabilities of Personal Watercraft《私人喷气艇的关闭油门转向能力》.pdf_第1页
第1页 / 共5页
SAE J 2608-2012 Off Throttle Steering Capabilities of Personal Watercraft《私人喷气艇的关闭油门转向能力》.pdf_第2页
第2页 / 共5页
SAE J 2608-2012 Off Throttle Steering Capabilities of Personal Watercraft《私人喷气艇的关闭油门转向能力》.pdf_第3页
第3页 / 共5页
SAE J 2608-2012 Off Throttle Steering Capabilities of Personal Watercraft《私人喷气艇的关闭油门转向能力》.pdf_第4页
第4页 / 共5页
SAE J 2608-2012 Off Throttle Steering Capabilities of Personal Watercraft《私人喷气艇的关闭油门转向能力》.pdf_第5页
第5页 / 共5页
亲,该文档总共5页,全部预览完了,如果喜欢就下载吧!
资源描述

1、SAE Technical Standards Board Rules provide that: “This report is published by SAE to advance the state of technical and engineering sciences. The use of this report is entirely voluntary, and its applicability and suitability for any particular use, including any patent infringement arising theref

2、rom, is the sole responsibility of the user.” SAE reviews each technical report at least every five years at which time it may be revised, reaffirmed, stabilized, or cancelled. SAE invites your written comments and suggestions.Copyright 2012 SAE International All rights reserved. No part of this pub

3、lication may be reproduced, stored in a retrieval system or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of SAE. TO PLACE A DOCUMENT ORDER: Tel: 877-606-7323 (inside USA and Canada) Tel: +1 724-776-4970

4、outside USA) Fax: 724-776-0790 Email: CustomerServicesae.org SAE WEB ADDRESS: http:/www.sae.orgSAE values your input. To provide feedback on this Technical Report, please visit http:/www.sae.org/technical/standards/J2608_201205SURFACEVEHICLERECOMMENDEDPRACTICEJ2608 MAY2012 Issued 2003-09Reaffirmed

5、2012-05 Superseding J2608 SEP2003 Off Throttle Steering Capabilities of Personal Watercraft RATIONALEJ2608 has been reaffirmed to comply with the SAE five-year review policy. Copyright SAE International Provided by IHS under license with SAENot for ResaleNo reproduction or networking permitted witho

6、ut license from IHS-,-,-SAE J2608 Reaffirmed MAY2012 Page 2 of 5 Copyright SAE International Provided by IHS under license with SAENot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SAE J2608 Reaffirmed MAY2012 Page 3 of 5 Copyright SAE International Provided by IHS u

7、nder license with SAENot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SAE J2608 Reaffirmed MAY2012 Page 4 of 5 Copyright SAE International Provided by IHS under license with SAENot for ResaleNo reproduction or networking permitted without license from IHS-,-,-SAE J2608 Reaffirmed MAY2012 Page 5 of 5 REAFFIRMED BY THE SAE PERSONAL WATERCRAFT COMMITTEE Copyright SAE International Provided by IHS under license with SAENot for ResaleNo reproduction or networking permitted without license from IHS-,-,-

展开阅读全文
相关资源
猜你喜欢
  • FORD WSB-M4D815-A2-2006 POLYPROPYLENE (PP) FOAM CLOSED CELL MEDIUM DENSITY  TO BE USED WITH FORD WSS-M99P1111-A  (Shown on WSB-M4D815-A1)《中等密度闭孔聚丙烯(PP)泡沫  与标准FORD WSS-M99P1111-A一起使.pdf FORD WSB-M4D815-A2-2006 POLYPROPYLENE (PP) FOAM CLOSED CELL MEDIUM DENSITY TO BE USED WITH FORD WSS-M99P1111-A (Shown on WSB-M4D815-A1)《中等密度闭孔聚丙烯(PP)泡沫 与标准FORD WSS-M99P1111-A一起使.pdf
  • FORD WSB-M4D815-A3-2006 POLYPROPYLENE (PP) FOAM CLOSED CELL HIGH DENSITY  TO BE USED WITH FORD WSS-M99P1111-A  (Shown on WSB-M4D815-A1)《高密度闭孔聚丙烯(PP)泡沫  与标准FORD WSS-M99P1111-A一起使用  .pdf FORD WSB-M4D815-A3-2006 POLYPROPYLENE (PP) FOAM CLOSED CELL HIGH DENSITY TO BE USED WITH FORD WSS-M99P1111-A (Shown on WSB-M4D815-A1)《高密度闭孔聚丙烯(PP)泡沫 与标准FORD WSS-M99P1111-A一起使用 .pdf
  • FORD WSB-M4D816-A-2008 POLYCARBONATE + ABS BLEND (PC+ABS) MEDIUM IMPACT VERY HIGH HEAT MOLDING COMPOUND  TO BE USED WITH FORD WSS-M99P1111-A  《聚碳酸酯+ABS共混物(PC+ABS)中冲击强度 甚高热模塑料(和FORD.pdf FORD WSB-M4D816-A-2008 POLYCARBONATE + ABS BLEND (PC+ABS) MEDIUM IMPACT VERY HIGH HEAT MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《聚碳酸酯+ABS共混物(PC+ABS)中冲击强度 甚高热模塑料(和FORD.pdf
  • FORD WSB-M4D816-A2-2008 POLYCARBONATE + ABS BLEND (PC+ABS) MEDIUM IMPACT HIGH HEAT MOLDING COMPOUND  TO BE USED WITH FORD WSS-M99P1111-A  《中等抗冲、耐高温丙烯腈-丁二烯-苯乙烯共聚物(ABS) 聚碳酸酯混合物(ABS+P.pdf FORD WSB-M4D816-A2-2008 POLYCARBONATE + ABS BLEND (PC+ABS) MEDIUM IMPACT HIGH HEAT MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《中等抗冲、耐高温丙烯腈-丁二烯-苯乙烯共聚物(ABS) 聚碳酸酯混合物(ABS+P.pdf
  • FORD WSB-M4D818-A2-2010 POLYPROPYLENE (PP) SHEET 40% LONG GLASS FIBER REINFORCED  TO BE USED WITH FORD WSS-M99P1111-A  《40%长玻璃纤维增强的聚丙烯(PP)平布  与标准FORD WSS-M99P1111-A一起使用 》.pdf FORD WSB-M4D818-A2-2010 POLYPROPYLENE (PP) SHEET 40% LONG GLASS FIBER REINFORCED TO BE USED WITH FORD WSS-M99P1111-A 《40%长玻璃纤维增强的聚丙烯(PP)平布 与标准FORD WSS-M99P1111-A一起使用 》.pdf
  • FORD WSB-M4D821-A-2006 ACETAL (POM) COPOLYMER 25 % GLASS BEAD FILLED MOLDING COMPOUND  TO BE USED WITH FORD WSS-M99P1111-A  《25%玻璃珠填充的乙缩醛共聚物(POM)成型料  与标准FORD WSS-M99P1111-A一起使用 》.pdf FORD WSB-M4D821-A-2006 ACETAL (POM) COPOLYMER 25 % GLASS BEAD FILLED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《25%玻璃珠填充的乙缩醛共聚物(POM)成型料 与标准FORD WSS-M99P1111-A一起使用 》.pdf
  • FORD WSB-M4D824-A-2010 POLYPHENYLENE ETHER + POLYSTYRENE BLEND (PPE+PS) FOAM RIGID  TO BE USED WITH FORD WSS-M99P1111-A  《刚性聚苯醚+聚苯乙烯(PPE+PS)泡沫  与标准FORD WSS-M99P1111-A一起使用 》.pdf FORD WSB-M4D824-A-2010 POLYPHENYLENE ETHER + POLYSTYRENE BLEND (PPE+PS) FOAM RIGID TO BE USED WITH FORD WSS-M99P1111-A 《刚性聚苯醚+聚苯乙烯(PPE+PS)泡沫 与标准FORD WSS-M99P1111-A一起使用 》.pdf
  • FORD WSB-M4D825-A-2010 POLYPROPYLENE (PP) COPOLYMER 7% MINERAL FILLED COLOR PIGMENTED LOW GLOSS MOLDING COMPOUND INTERIOR  TO BE USED WITH FORD WSS-M99P1111-A  《汽车内部用低光泽、着色型7%矿物填充的.pdf FORD WSB-M4D825-A-2010 POLYPROPYLENE (PP) COPOLYMER 7% MINERAL FILLED COLOR PIGMENTED LOW GLOSS MOLDING COMPOUND INTERIOR TO BE USED WITH FORD WSS-M99P1111-A 《汽车内部用低光泽、着色型7%矿物填充的.pdf
  • FORD WSB-M4D828-A-2006 POLYAMIDE 6 (PA6) MODIFIED FLEXIBLE EXTRUSION MOLDING COMPOUND (Use WSS-M4D933-A1 06 07 1995)《软质聚酰胺6改性挤塑成型料 使用WSS-M4D933-A1 06 07 1995》.pdf FORD WSB-M4D828-A-2006 POLYAMIDE 6 (PA6) MODIFIED FLEXIBLE EXTRUSION MOLDING COMPOUND (Use WSS-M4D933-A1 06 07 1995)《软质聚酰胺6改性挤塑成型料 使用WSS-M4D933-A1 06 07 1995》.pdf
  • 相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > 其他

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1