1、 _ SAE Technical Standards Board Rules provide that: “This report is published by SAE to advance the state of technical and engineering sciences. The use of this report is entirely voluntary, and its applicability and suitability for any particular use, including any patent infringement arising ther
2、efrom, is the sole responsibility of the user.” SAE reviews each technical report at least every five years at which time it may be revised, reaffirmed, stabilized, or cancelled. SAE invites your written comments and suggestions. Copyright 2015 SAE International All rights reserved. No part of this
3、publication may be reproduced, stored in a retrieval system or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of SAE. TO PLACE A DOCUMENT ORDER: Tel: 877-606-7323 (inside USA and Canada) Tel: +1 724-776-49
4、70 (outside USA) Fax: 724-776-0790 Email: CustomerServicesae.org SAE WEB ADDRESS: http:/www.sae.org SAE values your input. To provide feedback on this Technical Report, please visit http:/www.sae.org/technical/standards/J2931/6_201508 SURFACE VEHICLE INFORMATION REPORT J2931/6 AUG2015 Issued 2015-08
5、 Signaling Communication for Wirelessly Charged Electric Vehicles RATIONALE The requirements described here identify the equipment (system elements) and interactions to support wireless charging protocol for plug-in vehicles, as described in J2847. Key system elements include the vehicles rechargeab
6、le energy storage system (RESS), power conversion equipment (on-board and off-board), utility meter, optional advisory sub-meter (EUMD), load management system (LMS), and equipment for control, monitoring, and communication. System elements may be optionally packaged in various ways (either separate
7、ly or in combination) to deliver implementations tailored to a given environment, such as a residential, public or commercial charging location. Implementations may also vary in relation to the vehicle itself. The charging control technology will reside on the vehicle and premises. TABLE OF CONTENTS
8、 1. SCOPE . 2 1.1 Purpose 2 2. REFERENCES . 2 2.1 Applicable Documents . 2 2.2 Related Publications 2 2.3 Other Publications 3 3. DEFINITIONS 3 4. TECHNICAL REQUIREMENTS . 3 4.1 System Definition . 4 4.2 Security 4 5. NETWORK NAMING CONVENTIONS (Informative) 4 6. NOTES . 5 6.1 Revision Indicator . 5
9、 SAE INTERNATIONAL J2931/6 AUG2015 Page 2 of 5 1. SCOPE This SAE Information Report J2931/6 establishes the requirements for physical and data link layer communications between Plug-in Electric Vehicles (PEV) and the Electric Vehicle Supply Equipment (EVSE). 1.1 Purpose The purpose of J2931/6 is to
10、complement J2954 and J2847/6 as it describes the physical layer communication between the EVSE and the PEV. The use cases for communications between a PEV and the utility are described in J2836/6 with the message details included in J2847/6. This document is intended to describe the issues with PEV
11、association, interoperability with various PEVs and EVSE suppliers, utilities, etc. as multiple manufacturers introduce their products. Several scenarios are encountered as the customers determine their home application to PEV energy needs that also includes the Home Area Network (HAN) that interfac
12、es with home appliances and the utility. Some customers will interface with the utility using multifamily dwellings, street parking, energy transfer at work, businesses and these all have their variations on how the PEV communicates. 2. REFERENCES 2.1 Applicable Documents The following publications
13、form a part of this specification to the extent specified herein. Unless otherwise indicated, the latest issue of SAE publications shall apply. 2.1.1 SAE Publications Available from SAE International, 400 Commonwealth Drive, Warrendale, PA 15096-0001, Tel: 877-606-7323 (inside USA and Canada) or +1
14、724-776-4970 (outside USA), www.sae.org. SAE J2836/6 Use Cases for Wireless Charging Communication for Plug-in Electric Vehicles SAE J2847/6 Communication between Wireless Charged Vehicles and Wireless EV Chargers 2.2 Related Publications The following publications are provided for information purpo
15、ses only and are not a required part of this SAE Technical Report. 2.2.1 SAE Publications Available from SAE International, 400 Commonwealth Drive, Warrendale, PA 15096-0001, Tel: 877-606-7323 (inside USA and Canada) or +1 724-776-4970 (outside USA), www.sae.org. SAE J2836/1 Use Cases for Wireless C
16、harging Communication for Plug-in Electric Vehicles SAE J2836/2 Use Cases for Communication between Plug-in Vehicles and Off-Board DC Charger SAE J2836/3 PEV Communicating as a Distributed Energy Resource SAE J2836/5 Use Cases for Customer Communication for Plug-in Electric Vehicles SAE J2847/1 Comm
17、unication for Smart Charging of Plug-in Electric Vehicles using Smart Energy Profile 2.0 SAE J2847/2 Communication Between Plug-In Vehicles and Off-Board DC Chargers SAE J2894/1 Power Quality Requirements for Plug-In Electric Vehicle Chargers SAE INTERNATIONAL J2931/6 AUG2015 Page 3 of 5 2.3 Other P
18、ublications 2.3.1 IEEE Publications Available from IEEE Operations Center, 445 Hoes Lane, Piscataway, NJ 08854-4141, Tel: 732-981-0060, www.ieee.org. IEEE, 802.11-2012 3. DEFINITIONS 3.1 ACCESS POINT An entity that contains one station (STA) and provides access to the distribution services, via the
19、wireless medium (WM) for associated STAs. 3.2 BROADCAST ADDRESS A unique group address that specifies all stations. 3.3 COMMUNICATION CHANNEL In this document, the communication channel is the 802.11 link. 3.4 DATA LINK LAYER Protocol layer used to link the physical layer to the network layer. It en
20、capsulates the MAC sub-layer. 3.5 MEDIUM ACCESS CONTROL (MAC) A sub-layer of the data link layer, the MAC is a set of algorithms used for managing the access to the communication channel and mechanics to protect the integrity of transferred data. 3.6 MULTICAST ADDRESS A medium access control (MAC) a
21、ddress that has the group bit equal to 1. 3.7 PHYSICAL LAYER (PHY) Set of specifications for the electrical signals used to convey information. The PHY specification defines the frequencies, amplitudes, bit rate and synchronization methods supported by a transceiver. 3.8 STATION (STA) A logical enti
22、ty that is a singly addressable instance of a medium access control (MAC) and physical layer (PHY) interface to the wireless medium (WM). 4. TECHNICAL REQUIREMENTS Wireless power transfer enables the charging of the EV without the handling of a power cord and connector. The communications medium use
23、d therefore is also wireless. Communication between a Wirelessly Charged Electric Vehicle (PEV) and a Wireless EV Charger (EVSE) takes place over one of the 802.11 PHY layers, as described in IEEE 802.11-2012. The architecture is shown in J2836/6. The messages for wireless energy transfer between th
24、e PEV and the off-board charger in the EVSE are described in J2847/6. The association of the PEV to the EVSE is described in J2931/6. Association use cases are described in J2836/6 with the actual messages in J2847/6. In general J2836 is the series for Use cases and general information, J2847 is the
25、 corresponding message details and J2931 describes requirements and protocol. SAE INTERNATIONAL J2931/6 AUG2015 Page 4 of 5 The following paragraphs identify the detail of wireless communication for electric vehicle charging: 4.1 System Definition 4.1.1 EVSE Requirements 4.1.1.1 Stationary Charging
26、Environment For the power transfer to a parked vehicle x The EVSE shall support the 802.11n PHY/MAC and may optionally also support 802.11ac and/or 802.11p.The PEV shall support the 802.11n PHY/MAC; it may optionally also support 802.11ac and/or 802.11p. NOTE: The choice of 802.11n allows home WPT s
27、ystems and other WPT systems designed to only charge stationary EVs to take advantage of the stable and mature 802.11n technology while avoiding any licensing requirements that may apply to 802.11p infrastructure (roadside) equipment. 4.1.1.2 Dynamic Charging Environment For the power transfer to mo
28、ving vehicles x The EVSE shall support the 802.11p PHY/MAC. x The PEV shall support the 802.11p PHY/MAC. 4.1.2 General Requirements The EVSE shall act as an Access Point. The EVSE should support multicast capability in order to support the beacon message (optional) defined in J2847/6. Possible SSID
29、naming conventions are in section 5. 4.2 Security For 802.11n / 802.11ac, the access level security shall use WPA2 (also known as IEEE 802.11i). For 802.11p, the access level security shall use the default security for WAVE/DSRC. For further information on security, refer to J2931/7.(WIP). NOTE: J29
30、31/7 may override the requirements in this section. 5. NETWORK NAMING CONVENTIONS (INFORMATIVE) The first four letters of the SSID of the network may be set to “WPT”. Revision History Version No. Description Date 0.0 First rough draft for discussion 05/30/2014 0.1 Revised during web conference. 03/2
31、7/2015 0.2 Changed WCEV to PEV. Added informative section for network names. 04/17/2015 0,3 Minor editorial corrections 05/28/2015 SAE INTERNATIONAL J2931/6 AUG2015 Page 5 of 5 6. NOTES 6.1 Revision Indicator A change bar (l) located in the left margin is for the convenience of the user in locating
32、areas where technical revisions, not editorial changes, have been made to the previous issue of this document. An (R) symbol to the left of the document title indicates a complete revision of the document, including technical revisions. Change bars and (R) are not used in original publications, nor in documents that contain editorial changes only. PREPARED BY THE SAE HYBRID - EV COMMITTEE
