SAE J 3024-2014 Product Safety Signs for Ready Mixed Concrete Trucks《预拌混凝土卡车的产品安全标志》.pdf
《SAE J 3024-2014 Product Safety Signs for Ready Mixed Concrete Trucks《预拌混凝土卡车的产品安全标志》.pdf》由会员分享,可在线阅读,更多相关《SAE J 3024-2014 Product Safety Signs for Ready Mixed Concrete Trucks《预拌混凝土卡车的产品安全标志》.pdf(11页珍藏版)》请在麦多课文档分享上搜索。
1、_SAE Technical Standards Board Rules provide that: “This report is published by SAE to advance the state of technical and engineering sciences. The use of this report is entirely voluntary, and its applicability and suitability for any particular use, including any patent infringement arising theref
2、rom, is the sole responsibility of the user.”SAE reviews each technical report at least every five years at which time it may be revised, reaffirmed, stabilized, or cancelled. SAE invites your written comments and suggestions.Copyright 2014 SAE InternationalAll rights reserved. No part of this publi
3、cation may be reproduced, stored in a retrieval system or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of SAE.TO PLACE A DOCUMENT ORDER: Tel: 877-606-7323 (inside USA and Canada)Tel: +1 724-776-4970 (out
4、side USA)Fax: 724-776-0790Email: CustomerServicesae.orgSAE WEB ADDRESS: http:/www.sae.orgSAE values your input. To provide feedbackon this Technical Report, please visithttp:/www.sae.org/technical/standards/J3024_201408SURFACE VEHICLERECOMMENDED PRACTICEJ3024 AUG2014Issued 2014-08Product Safety Sign
5、s for Ready Mixed Concrete TrucksRATIONALECommon safety signs recommended by this standard will improve safety by establishing common signs to be used by all manufacturers of ready mixed concrete trucks. Common signs will benefit operators by establishing recognizable reminders of hazards that will
6、be the same no matter who manufactures the product. FOREWORDThis document presents safety signs for use on ready mixed concrete trucks.TABLE OF CONTENTS1. SCOPE 12. REFERENCES 13. DEFINITIONS . 24. GENERAL . 25. SAFETY SIGN TEXT AND ARTWORK 36. NOTES 111. SCOPEThis document presents a catalog of saf
7、ety sign text and artwork that can be used by any ready mixed concrete truck manufacturer to warn of common hazards. 2. REFERENCES2.1 Applicable PublicationsThe following publications form a part of this specification to the extent specified herein. 2.1.1 SAE PublicationAvailable from SAE Internatio
8、nal, 400 Commonwealth Drive, Warrendale, PA 15096-0001, Tel: 877-606-7323 (inside USA and Canada) or 724-776-4970 (outside USA), www.sae.org.SAE J2967 Ready Mixed Concrete Truck Recommended PracticeSAE INTERNATIONAL J3024 Issued AUG2014 Page 2 of 112.1.2 ISO PublicationsAvailable from American Natio
9、nal Standards Institute, 25 West 43rd Street, New York, NY 10036-8002, Tel: 212-642-4900, www.ansi.org.ISO 9244 Earth-moving machinery Machine safety labels General PrinciplesISO 7010 Graphical symbols Safety colours and safety signs Registered safety signs2.1.3 Other PublicationsANSI Z535.4 America
10、n National Standard for Product Safety Signs and labelsANSI Z535.6 American National Standard for Product Safety Information in Product Manuals, instructions, and Other Collateral Materials3. DEFINITIONS3.1 Product Safety SignSign, label, or decal affixed to a product that provides safety informatio
11、n concerning the hazard, the degree or level of hazard seriousness, the probable consequence of involvement with the hazard, and how the hazard can be avoided.4. GENERAL4.1 The product safety signs shown in this document are designed for sufficiency of text and graphic size with respect to e ach haz
12、ard. 4.2 Limitations inherent in some reproduction and display technologies may require increased line thickness or other minor modifications of symbols. Such modifications are acceptable provided the symbol is unchanged in its basic graphical elements and remains easily discernible by the operator.
13、4.3 To improve the appearance and perceptibility of a safety sign, or to coordinate with the design of the equipment to which the sign is applied, it may be necessary to change the line thickness or round the corners of a symbol. The graphic designer is free to make such changes, provided that the e
14、ssential perceptual characteristics of the symbol are maintained.4.4 Some of the product safety signs included in this document are provided with “textless” two-panel versions developed using the guidelines found in ISO 7010. These versions may be used in place of the ANSI Z535.4 signs at the option
15、 of the manufacturer.4.5 Symbols on controls and displays shall have good contrast to their background. Pictorials may use either a light symbol on a dark background or a dark symbol on a light background at the manufacturers discretion. When a pictorial image is reversed (for example, from black-on
16、-white to white-on-black and vice versa), it shall be done for the entire pictorial.4.6 Product safety signs should be located as close as practical to the recommended locations.4.7 Reference numbers are provided as a convenience to the organization of this document and need not appear on the final
17、product.4.8 All standard ISO version signs are 6.65 in. tall by 3.35 in. wide.4.9 Font sizes are based on using Microsoft Sans Serif.4.10 All required signs, instruction plates, and labels shall be permanent in nature and securely attached.SAE INTERNATIONAL J3024 Issued AUG2014 Page 3 of 114.11 The
18、signs shall have resistance to damage from UV radiation, temperatures between 30F and 176F (35C and 80C) and exposure to cleaning fluids, oil, fuel, water, hydraulic fluids, or other fluids used on the vehicle.4.12 Text for required signs, instruction plates, and labels shall be provided in the prim
- 1.请仔细阅读文档,确保文档完整性,对于不预览、不比对内容而直接下载带来的问题本站不予受理。
- 2.下载的文档,不会出现我们的网址水印。
- 3、该文档所得收入(下载+内容+预览)归上传者、原创作者;如果您是本文档原作者,请点此认领!既往收益都归您。
本资源只提供5页预览,全部文档请下载后查看!喜欢就下载吧,查找使用更方便
10000 积分 0人已下载
下载 | 加入VIP,交流精品资源 |
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- SAEJ30242014PRODUCTSAFETYSIGNSFORREADYMIXEDCONCRETETRUCKS 混凝土 卡车 产品 安全标志 PDF
链接地址:http://www.mydoc123.com/p-1027772.html