1、 AEROSPACE STANDARD FERRULE, SLEEVE, BUTT WELD, THREADLESS, COUPLING, FLEXIBLE, FIXED CAVITY, SELF-BONDING,METRIC MA2262Copyright 2015 SAE International All rights reserved. No part of this publication may be reproduced, stored in a retrieval system or transmitted, in any form or by any means, elect
2、ronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of SAE. TO PLACE A DOCUMENT ORDER: Tel: 877-606-7323 (inside USA and Canada) Tel: +1 724-776-4970 (outside USA) Fax: 724-776-0790 Email: CustomerServicesae.org SAE WEB ADDRESS: http:/www.sae.org ISSUED 199
3、3-11REAFFIRMED2015-04THIRD ANGLE PROJECTION CUSTODIAN: G-3/G-3A FEDERAL SUPPLY CLASS 4730MA2262 SHEET 1 OF 2 PROCUREMENT SPECIFICATION: MA2241 /3/SAE Technical Standards Board Rules provide that: “This report ispublished by SAE toadvance thestate of technicalandengineering sciences. Theuse ofthisrep
4、ort is entirelyvoluntary, andits applicability and suitability forany particularuse,including any patent infringement arising therefrom, isthe soleresponsibilityofthe user.”SAE reviews eachtechnicalreport at least every five years at which time itmay berevised,reaffirmed, stabilized, orcancelled. SA
5、E invites yourwrittencomments andsuggestions. SAE values your input. To provide feedbackon this Technical Report, please visit http:/www.sae.org/technical/standards/MA2262 RATIONALE MA2262 HAS BEEN REAFFIRMED TO COMPLY WITH THE SAE FIVE-YEAR REVIEW POLICY. FIGURE 1 - SLEEVE FERRULE BUTT WELDEDTABLE
6、1 - FERRULE DIMENSIONS IN MM AND WEIGHTS IN KGAEROSPACE STANDARD MA2262 SHEET 2 OF 2 FERRULE, SLEEVE, BUTT WELD, THREADLESS, COUPLING, FLEXIBLE, FIXED CAVITY, SELF-BONDING, METRIC NOTES:/1/ MATERIAL: a. CODE “A” - 6061-T6 ALUMINUM ALLOY PER QQ-A-225/8b. CODE “C” - 321 OR 347 CORROSION RESISTING STEE
7、L PER QQ-S-763c. CODE “T” - CP-70 COMMERCIALLY PURE TITANIUM PER MIL-T-90472. FINISH: a. MATERIAL CODE “A” - NONEb. MATERIAL CODE “C” - PASSIVATE PER QQ-P-35c. MATERIAL CODE “T” - NONE/3/ THIS PART SHALL BE QUALIFIED TO THE PROCUREMENT SPECIFICATION IN A COMPLETE ASSEMBLY (SEE MA2242). USERS OF THIS
8、 STANDARD ARE ADVISED TO CONTROL SOURCE APPROVAL(S) BY STANDARD PAGE SUPPLEMENT SHEET OR SIMILAR MEANS./4/ IDENTIFICATION: INK STAMP, 1.58 mm OR LARGER LETTERS, WITH THE FOLLOWING MINIMUM INFORMATION: MANUFACTUERS NAME, TRADEMARK OR CAGE NUMBER, COMPLETE “MA” NUMBER, AND DATE OF MANUFACTURE IN QUART
9、ERS (1Q91 - FIRST QUARTER 1991). SIZES 18 AND SMALLER MAY BE INDIVIDUALLY BAGGED WITH A TAG CONTAINING THE ABOVE INFORMATION.5. RATED OPERATING CHARACTERISTICS: SEE MA2241./6/ SPECIFIC DIMENSIONS AND TOLERANCES ARE SPECIFIED AND CONTROLLED BY THE SUPPLIER. THE SUPPLIER IS REPONSIBLE TO ENSURE COMPAT
10、IBILITY WITH THE ASSEMBLY AND COMPLIANCE WITH THE REQUIREMENTS OF THE PROCUREMENT SPECIFICATION.7. TUBING SIZES ARE PER ISO 2964-1974 EXCEPT AS NOTED./8/ THESE FERRULES FIT COUPLING ASSEMBLIES THAT USE NONSTANDARD TUBING DIAMETERS.9. SURFACE TEXTURE: SYMBOLS PER ANSI Y14.36; REQUIREMENTS PER ANSI/AS
11、ME B46.1. UNLESS OTHERWISE SPECIFIED, MACHIND SURFACES TO BE 3.2 m Ra.10. BREAK EDGES 0.08 TO 0.38 UNLESS OTHERWISE SPECIFIED.11. DIMENSIONING AND TOLERANCING: ANSI Y14.5M.12. DIMENSIONS IN MILLIMETERS, UNLESS OTHERWISE SPECIFIED, TOLERANCES: LINEAR DIMENSIONS 0.13, ANGULAR DIMENSIONS 0.5.13. EXAMPLE OF PART NUMBER:
