1、 AEROSPACE STANDARD STUD, STRAIGHT - 2.5 DIA ENGAGEMENT, A286, MJ METRIC 7 X 1 - 7 X 1 MA3380Copyright 2013 SAE International All rights reserved. No part of this publication may be reproduced, stored in a retrieval system or transmitted, in any form or by any means, electronic, mechanical, photocop
2、ying, recording, or otherwise, without the prior written permission of SAE. TO PLACE A DOCUMENT ORDER: Tel: 877-606-7323 (inside USA and Canada) Tel: +1 724-776-4970 (outside USA) Fax: 724-776-0790 Email: CustomerServicesae.org SAE WEB ADDRESS: http:/www.sae.org ISSUED 1988-01REAFFIRMED 2013-10THIRD
3、 ANGLE PROJECTION CUSTODIAN: E-25 FEDERAL SUPPLY CLASS 5307 MA3380 SHEET 1 OF 3 PROCUREMENT SPECIFICATION: MA3375SAE Technical Standards Board Rules provide that: “This report ispublishedby SAE toadvance thestate of technicalandengineering sciences. Theuse ofthis report is entirely voluntary, andits
4、 applicability and suitability forany particular use,including any patent infringement arising therefrom, isthe soleresponsibilityofthe user.”SAE reviews eachtechnicalreport at least every five years at which time itmay berevised, reaffirmed, stabilized, orcancelled. SAE invites yourwrittencomments
5、andsuggestions. SAE values your input. To provide feedbackon this Technical Report, please visit http:/www.sae.org/technical/standards/MA3380 RATIONALE MA3380 HAS BEEN REAFFIRMED TO COMPLY WITH THE SAE FIVE-YEAR REVIEW POLICY. FIGURE 1 AEROSPACE STANDARD MA3380 SHEET 2 OF 3 STUD, STRAIGHT - 2.5 DIA
6、ENGAGEMENT, A286, MJ METRIC 7 X 1 - 7 X 1 FIGURE 2 AEROSPACE STANDARD MA3380 SHEET 3 OF 3 STUD, STRAIGHT - 2.5 DIA ENGAGEMENT, A286, MJ METRIC 7 X 1 - 7 X 1 NOTES:1. MATERIAL: CORROSION AND HEAT RESISTANT STEEL, AMS 5731, AMS 5732, AMS 5734, OR AMS 5737.2. COATING: NONE.3. PROCUREMENT SPECIFICATION:
7、 MA33754. FLUORESCENT PENETRANT INSPECTION PER AMS 2645.5. SURFACE TEXTURE: SYMBOLS PER ANSI Y14.36-1978, REQUIREMENTS PER ANSI B46.1-1978. UNLESS OTHERWISE SPECIFIED, SURFACES TO BE 3.2 MICROMETRES Ra.6. DIMENSIONING AND TOLERANCING: ANSI Y14.5M-1982.7. DIMENSIONS IN MILLIMETRES UNLESS OTHERWISE SPECIFIED.8. DO NOT USE UNASSIGNED PART NUMBERS.
