1、w The Engineering Society A E R OS PAC E For Advancing Mobi/ity Land Sea Air and Space M AT E R I A L INTERNATIONAL 400 Commonwealth Drive. Warrendale, PA 15096-0001 SPECIFICATION Submitted for recognition as an American National Standard MAM 7211 C Issued 15 JUL 1980 Revised 1 OCT 1993 Superseding
2、MAM 72116 COTTER PINS, METRIC Corrosion and Heat Resistant Steel 18Cr - 10.5Ni - 0.40Ti UNS S32100 This specification has been designated as “SUPERSEDEO“ by the Aerospace Materials Division, SAE, as of July 1992. The requirements of this specification are embodied in the latest issue of MA7211, Pin,
3、 Cotter, Steel, Corrosion and Heat Resistant, 18Cr - 10.5Ni - 0.40Ti, Procurement Specification for. The requirements of the latest issue of MA7211 shall be fulfilled whenever reference is made to MAM 7211. By above action, jurisdiction of subject specification is transferred from AMS Committee “F“
4、to SAE Committee E-25. CAUTION: The applicable AS specification may present different technical requirements than the superseded AMS specification. r PREPARED UNDER THE JURISDICTION OF AMS COMMITTEE “F“ SAE Technical Standards Board Rules provide that: This repot is published by SAE to advance the s
5、tate of technical and engineering sciences. The use of this report is entirely voluntary, and its applicability and suitability for any particufar use, including any patent infringement F arising therefrom, is the sole responsibility of the user. SAE reviews each technical report at least every five years at which time it may be reaffirtned, revised, or cancelled. SAE invites your wntten comments and suggestions. Copyright 1993 Society of Automotive Engineers, Inc. All rights reserved. Pnnted in U.S.A.
