1、 Collection of SANS standards in electronic format (PDF) 1. Copyright This standard is available to staff members of companies that have subscribed to the complete collection of SANS standards in accordance with a formal copyright agreement. This document may reside on a CENTRAL FILE SERVER or INTRA
2、NET SYSTEM only. Unless specific permission has been granted, this document MAY NOT be sent or given to staff members from other companies or organizations. Doing so would constitute a VIOLATION of SABS copyright rules. 2. Indemnity The South African Bureau of Standards accepts no liability for any
3、damage whatsoever than may result from the use of this material or the information contain therein, irrespective of the cause and quantum thereof. SCHEDULE: SAHS 0120 : Pert. 4 Secticjn MY,-1983 Kerbing and channn1lj.n PART 4 : TYPICAL SCHEDIJLES OE QUANTlTIES SECTION MK CONTEl4TS Page Number SECTIO
4、N : KERBTNG AND CHANNELLING 1 9 November 1383 Approved by the COUNCIL OF THE SOUTH AFRTCAN BUREAU OF STANDARDS SABS 0120 : Part 4 Scction MK-l983 Kerbing and channelling SABS 1200 MK : KERBING AND CHANNELLING NOTE: See Clause 5 of Section O. Iten: NO. .l .1.1 -1.2 -1.3 .1.4 .1.5 .2 -2.1 “2.2 .2.3 .3
5、 .3.1 .3.2 .3.3 .3.4 .3.5 .3.6 .3.7 Payment refers Short Description SECTTON : KERBING AN11 -CtiANNELLING CONCRETE KCKI3ING AND CHANNELZING Type half-battered, Fig. 3 kerb; and Type tapered, Fig. 14 channel (SkBS 927) Variation of tests on extruded kerbitiq a) Transverse strength test (Prov.) b) Set
6、 of 3 cubes (Prov.) C) Set oE 3 cores (Prov.) Depressed kerbs . CHUTES to Dwg. on slope of a) Cuts b) Fills Concrete scrred below chute, where and as ordered only ANCILLARIES -.W- OPEN DRAINS TO DWG. a) Trim excavations in soft and intermediate material b) Sprayed bitumen emulsion primer c) Concrete, speciiied strength 20 MP* d) Formwork 1) internal face only 2) ends of slabs e) Sealed joints INLETS AND OUTLETS a) Inlets to Dwg. b) Outlets to Dwg. Unit m No. NO. NO. m m m m 3 m 2 2 2 n m2 m NO. NO. puan- tity Amount iabs ota
