1、 Collection of SANS standards in electronic format (PDF) 1. Copyright This standard is available to staff members of companies that have subscribed to the complete collection of SANS standards in accordance with a formal copyright agreement. This document may reside on a CENTRAL FILE SERVER or INTRA
2、NET SYSTEM only. Unless specific permission has been granted, this document MAY NOT be sent or given to staff members from other companies or organizations. Doing so would constitute a VIOLATION of SABS copyright rules. 2. Indemnity The South African Bureau of Standards accepts no liability for any
3、damage whatsoever than may result from the use of this material or the information contain therein, irrespective of the cause and quantum thereof. ISBN 978-0-626-21160-8 SANS 1118-7:2008Edition 3.3Any reference to SABS 1118-7 is deemedto be a reference to this standard(Government Notice No. 1373 of
4、8 November 2002)SOUTH AFRICAN NATIONAL STANDARD School clothing Part 7: Girls slacks and skirts Published by Standards South Africa 1 dr lategan road groenkloof private bag x191 pretoria 0001 tel: 012 428 7911 fax: 012 344 1568 international code + 27 12 www.stansa.co.za Standards South Africa SANS
5、1118-7:2008 Edition 3.3 Table of changes Change No. Date Scope Amdt 1 2000 Amended to delete a reference and to align this part of SABS 1118 with the latest edition of SABS 1118-1. Amdt 2 2001 Amended to accommodate the age of the wearer (on sizes to fit wearers up to twelve years) as well as the Im
6、perial sizes (for sizes to fit wearers older than twelve years). Amdt 3 2008 Amended to change the designation of SABS standards to SANS standards, with no technical changes. Foreword This South African standard was approved by National Committee StanSA SC 5110.05B, Clothing and made-up articles Sch
7、ool clothing, in accordance with procedures of Standards South Africa, in compliance with annex 3 of the WTO/TBT agreement. This document was published in February 2008. This document supersedes SABS 1118-7:2001 (edition 3.2). Annex A forms an integral part of this document. SANS 1118 consists of th
8、e following parts under the general title School clothing: Part 1: General requirements for school clothing. Part 2: Blazers. Part 3: Trousers and shorts. Part 4: Shirts. Part 5: Deleted by amendment No. 1. Part 6: Dresses, tunics and gyms. Part 7: Girls slacks and skirts. Part 9: Knee-high stocking
9、s and ankle socks. Part 10: Jerseys and cardigans. Part 11: Briefs. Part 12: Tracksuits. Part 13: Athletic wear. SANS 1118-7:2008 Edition 3.3 1 Contents Page Foreword 1 Scope . 3 2 Normative reference 3 3 Definitions 3 4 Materials . 3 5 Style, size and make 4 6 Packing, care-labelling and marking 7
10、7 Inspection . 7 Annex A (normative) Notes to purchasers 8 SANS 1118-7:2008 Edition 3.3 2 This page is intentionally left blank SANS 1118-7:2008 Edition 3.3 3 School clothing Part 7: Girls slacks and skirts 1 Scope This part of SANS 1118 specifies the materials, cut, make and trim of girls slacks an
11、d skirts. 2 Normative references The following standard contains provisions which, through reference in this text, constitute provisions of this part of SANS 1118. All standards are subject to revision and, since any reference to a standard is deemed to be a reference to the latest edition of that s
12、tandard, parties to agreements based on this part of SANS 1118 are encouraged to take steps to ensure the use of the most recent edition of the standard indicated below. Information on currently valid national and international standards can be obtained from Standards South Africa. SANS 1118-1, Scho
13、ol clothing Part 1: General requirements for school clothing. 3 Definitions For the purposes of this part of SANS 1118, the definitions given in SANS 1118-1 and the following definition apply: size designation the age (for sizes to fit intended wearers up to twelve years), or the Imperial size (for
14、sizes to fit intended wearers older than twelve years) as well as the numerical value, in centimetres, of the waist and hip girth of the intended wearer Amdt 2 4 Materials 4.1 Outer material The outer material, as required, shall be of a fabric that complies with the relevant requirements given in t
15、able 1 of SANS 1118-1. (The note to 4.1 of SANS 1118-1 shall also apply.) The colour(s) of the dyed fabric shall be an acceptable match to the required colour(s), as agreed upon between the purchaser and the supplier. Amdt 1 SANS 1118-7:2008 Edition 3.3 4 4.2 Supplementary materials and components T
16、he supplementary materials and components shall comply with the relevant requirements given in 4.2 of SANS 1118-1. Amdt 1 5 Style, size and make 5.1 Style The style shall be as required. Skirts and slacks shall have a plain or an elasticized waistband. 5.2 Size The slacks and skirts shall be supplie
17、d in one (or more) of the size designations given in columns 1 to 3 of table 1, as required, and their measurements, determined in accordance with 6.2 of SANS 1118-1, shall conform to the appropriate values given in columns 4 to 7. The skirt length shall be as agreed upon between the purchaser and t
18、he manufacturer. Amdt 1 SANS 1118-7:2008 Edition 3.3 5 Table 1 Size range for girls slacks and skirts Dimensions in centimetres1 2 3 4 5 6 7 8 Size designation Finished garment measurements Age (years) and waist girth (cm) Height Hip girth Hip1)Waist2)Body rise3)Outside leg length3)Distance between
19、waistline seam and position of hip measurement3)4 55 102 62 67 56 18 60 12,5 5-6 56 106 64 69 57 19 64 12,5 6-7 57 57 110 116 65 66 70 71 58 58 20 21 68 72 13,5 13,5 7-8 59 122 69 74 60 22 76 14,0 8-9 59 128 71 76 60 23 80 14,0 9-10 61 61 134 140 74 76 79 81 62 62 24 25 86 89 15,5 15,5 11 63 63 146
20、152 80 84 85 89 64 64 26 27 93 96 16,0 16,0 12 65 65 158 164 88 92 93 97 66 66 28 28 100 103 16,5 16,5 28 57 170 82 93 57 27 103 17,0 30 62 170 87 98 62 28 104 17,5 32 67 170 92 103 67 28 105 18,0 34 72 170 97 108 72 29 106 18,0 36 77 170 102 113 77 29 107 18,0 38 82 170 107 118 82 30 108 18,0 40 87
21、 170 112 123 87 30 109 18,0 42 92 170 117 128 92 30 110 18,0 1) Measured at the position specified in column 8. 2) In the case of elasticized waistbands, the mean of the stretched and relaxed circumferences of the waist of the garment. 3) These values are given for guidance only and apply only to gi
22、rls slacks. The difference between the outside leg length and the body rise of the slacks (which does not include the width of the waistband) is an indication of the inside leg length of girls slacks. Amdt 2SANS 1118-7:2008 Edition 3.3 6 5.3 Make 5.3.1 General The relevant requirements for garments
23、given in 4.3 of SANS 1118-1 shall apply. Amdt 1 5.3.2 Waistband The type of waistband, i.e. plain or elasticized, shall be as required. A plain waistband shall be lined with outer material and interlined with an appropriate interlining (see 4.2.1 of SANS 1118-1). Amdt 1 5.3.3 Openings and waistband
24、closures The lower end of each opening, whether fitted with a slide fastener or not, shall be secured with a bar tack. The waistband shall be closed by means of a hook and bar (see 4.2.6 of SANS 1118-1) or by means of a button and buttonhole (see 4.2.5 of SANS 1118-1). Amdt 1 5.3.4 Pockets Each end
25、of the mouth of each pocket shall be bar-tacked. 5.3.5 Bottoms of slacks The width of the finished hem of bottoms shall be at least 50 mm. The edges shall be overlocked, turned up and blindstitched. 5.3.6 Hems of skirts In the case of a skirt that has permanent (heat-set) pleats, the finished width
26、of the hem shall be at least 20 mm. In all other cases, the finished width of hems shall be at least 25 mm. The edges shall be overlocked, or turned in and blindstitched. 5.3.7 Buttonholes All buttonholes shall be of one of the following types, as appropriate to the outer material: a) the shirt type
27、 (with a bar at each end); or b) the type having an eye and that is barred or fish-tailed and may be gimped. The length of a buttonhole shall be such as to acceptably accommodate the relevant button. 5.3.8 Seams Unless otherwise required, seams shall be at least 9 mm wide and shall be as follows: a)
28、 side seams of skirts, and outside leg seams and seat seams of slacks shall be at least 20 mm wide, overlocked, and pressed open. Alternatively, a 9 mm safety stitch seam may be used; b) seat seams of slacks shall be sewn with stitch type 401 (see SANS 10101); c) all exposed edges shall be overlocke
29、d, or bound, or turned in and stitched. SANS 1118-7:2008 Edition 3.3 7 6 Packing, care-labelling and marking The requirements of clause 5 of SANS 1118-1 shall apply. Amdt 1 7 Inspection Inspection shall be done in accordance with clause 6 of SANS 1118-1. Amdt 1 SANS 1118-7:2008 Edition 3.3 8 Annex A
30、 (normative) Notes to purchasers A.1 The following requirements shall be specified in tender invitations and in each order or contract: a) the type and colour(s) of the outer material (see 4.1); b) the style (see 5.1); c) the size designation(s) required (see 5.2); d) the type of waistband (see 5.3.2); and e) the type of seams required (see 5.3.8). A.2 The following requirement shall be agreed upon between the supplier and the purchaser: the length of skirts (see 5.2). Standards South Africa
