1、 Collection of SANS standards in electronic format (PDF) 1. Copyright This standard is available to staff members of companies that have subscribed to the complete collection of SANS standards in accordance with a formal copyright agreement. This document may reside on a CENTRAL FILE SERVER or INTRA
2、NET SYSTEM only. Unless specific permission has been granted, this document MAY NOT be sent or given to staff members from other companies or organizations. Doing so would constitute a VIOLATION of SABS copyright rules. 2. Indemnity The South African Bureau of Standards accepts no liability for any
3、damage whatsoever than may result from the use of this material or the information contain therein, irrespective of the cause and quantum thereof. ISBN 978-0-626-21173-8 SANS 1360-7:2008Edition 1.1Any reference to SABS 1360-7 is deemedto be a reference to this standard(Government Notice No. 1373 of
4、8 November 2002)SOUTH AFRICAN NATIONAL STANDARD Size designation of clothes Part 7: Womens and girls underwear, nightwear, foundation garments and shirts Published by Standards South Africa 1 dr lategan road groenkloof private bag x191 pretoria 0001 tel: 012 428 7911 fax: 012 344 1568 international
5、code + 27 12 www.stansa.co.za Standards South Africa SANS 1360-7:2008 Edition 1.1 Table of changes Change No. Date Scope Amdt 1 2008 Amended to change the designation of SABS standards to SANS standards, with no technical changes. Foreword This South African standard was approved by National Committ
6、ee StanSA SC 5110.05A, Clothing and made-up articles Clothing, in accordance with procedures of Standards South Africa, in compliance with annex 3 of the WTO/TBT agreement. This document was published in March 2008. This document supersedes SABS 1360-7:1985 (edition 1). Preface This part of the spec
7、ification has been prepared under the direction of the SABS Clothing Committee. It is, in technical content, identical with ISO 4416. This part of the specification is one of a series which deals essentially with the size designation of clothes, and is not directly concerned with sizing systems as s
8、uch. The primary aim of this part of the specification is, as in the other specifications in the series, to establish a size designation system that is based on body measurements, and that indicates (in a simple, direct and meaningful manner) the body size of the person that a garment is intended to
9、 fit. Provided that the shape of the persons body (as indicated by the appropriate dimensions) has been accurately determined, this system will facilitate the choice of garments that fit. Choice of garment measurements is normally left to the designer and the manufacturers, who are concerned with th
10、e style, cut and other fashion elements. SANS 1360-7:2008 Edition 1.1 1 Contents Page Foreword Preface 1 Scope . 3 2 Definitions 3 3 Control dimensions 4 4 Size designation . 5 5 Labelling . 5 Figures 1-3 . 6-8 Appendix A Applicable standards 9 Appendix B Examples of relevant garments . 9 SANS 1360-
11、7:2008 Edition 1.1 2 This page is intentionally left blank SANS 1360-7:2008 Edition 1.1 3 Size designation of clothes Part 7: Womens and girls underwear, nightwear, foundation garments and shirts 1 Scope 1.1 This part of the specification establishes a system of designating the sizes of womens and g
12、irls underwear garments (including nightwear, foundation garments and shirts) that are classified as a) covering the upper or the whole body, or b) covering the lower body only, and applies to both civilian and uniform garments. Both the control dimensions on which the size designation system is bas
13、ed, and the method of indicating the size designation on a garment label, are specified. NOTE a) The standards referred to in this part of the specification are listed in appendix A. b) Examples of garments covered by this part of the specification are given in appendix B. 2 Definitions 2.1 For the
14、purposes of this part of the specification the relevant definitions given in SANS 10184 and the following definitions shall apply: girl a female person whose growth in height is not yet complete woman a female person whose growth in height is complete standard pictogram a pictogram symbol used to in
15、dicate the position on the body of the relevant control dimensions (see figure 1) SANS 1360-7:2008 Edition 1.1 4 3 Control dimensions 3.1 The control dimensions shall be as follows: a) Womens garments covering the upper body only: Foundation garments Other than foundation garments 1) Underbust girth
16、 Bust girth 2) Bust girth b) Girls garments covering the upper body only: Foundation garments Other than foundation garments 1) Underbust girth Bust girth 2) Bust girth Height c) Womens garments covering the whole body: Foundation garments Other than foundation garments and nightwear 1) Underbust gi
17、rth Bust girth 2) Bust girth Height Nightwear 1-piece garments 2-piece garments 1) Bust girth Bust girth 2) Height Hip girth 3) Height d) Girls garments covering the whole body: Other than foundation garments 1) Bust girth 2) Hip girth 3) Height e) Womens garments covering the lower body only: Found
18、ation garments Other than foundation garments 1) Waist girth Hip girth 2) Hip girth SANS 1360-7:2008 Edition 1.1 5 f) Girls garments covering the lower body only: Foundation garments Other than foundation garments 1) Waist girth Hip girth 2) Hip girth Height 4 Size designation 4.1 General The size d
19、esignation of each garment shall comprise the appropriate control dimensions (see 3.1), in centimetres, of the intended wearer of that garment. Where practicable, the standard pictogram shall be used as a means of indicating the size designation. Where it is not practicable to use the standard picto
20、gram, the numerical values of the control dimensions shall be given together with the appropriate descriptive words such as height, hip girth, etc., in the order in which they are given in 3.1. NOTE The above requirements shall not preclude the use, in exceptional instances, of a) size designations
21、comprising only one or two of the applicable control dimensions; b) size designations shown as a range by stating the minimum and maximum control dimensions separated by an oblique stroke or a hyphen. 4.2 Use of the standard pictogram 4.2.1 The minimum size of the pictogram is not specified but it s
22、hall be large enough to convey immediate understanding, and to allow the use of readily legible numerals. NOTE The recommended type for use on pictograms is UNIVERS No. U-59. 4.2.2 Girth measurements shall be shown on the left-hand side and length measurements on the right-hand side of the pictogram
23、. 4.3 Garment measurements Garment measurements shall not be incorporated in the size designation but, where considered of value, they may be indicated separately (see 5.3). 5 Labelling 5.1 Method The size designation of each garment shall be indicated clearly, conspicuously and in plainly legible f
24、orm on a label or on a swing ticket or on both. 5.2 Attachment The label or swing ticket shall be securely attached to the garment in a position where it is easily readable. SANS 1360-7:2008 Edition 1.1 6 5.3 Additional information Information additional to the size designation may be separately ind
25、icated on the label or on the swing ticket or on both, provided that it does not in any way reduce the prominence and conspicuousness of the size designation. Such additional information may include a size code number, body measurement(s) or garment measurement(s) considered to constitute useful inf
26、ormation. 5.4 Examples of labels The examples of labels given in figure 2 and figure 3 illustrate methods of labelling that range from the simple indication on the standard pictogram of the relevant control dimensions to more elaborate forms that provide additional information, such as a garment mea
27、surement or a size code number. Where the size designation is supplemented by a size code number, separation of the two, as illustrated, renders the size code number readily recognizable as being part of a system of size designation adopted for a limited population group only. Figure 1 Standard pict
28、ogram SANS 1360-7:2008 Edition 1.1 7 a) Womans brassiere Underbust girth 80 Bust girth 95 or Size code1)80B b) Womans pyjamas Burst girth 88 92Hip girth 96 100or Height 158 164c) Womans girdle Waist girth 76 Hip girth 100 or d) Womans sport shirt Bust girth 104 Size code 181)or Figure 2 Examples of
29、labels for womens wear garments 1) Examples of additional information included in accordance with 5.3. SANS 1360-7:2008 Edition 1.1 8 a) Girls T-shirt Bust girth 76 80 Height 148 or b) Girls gym suit Bust girth 68 Hip girth 78 or Height 128 Waist girth 601)c) Girls panties Bust girth 80 Height 140 o
30、r d) Girls uniform shirt Bust girth 64 Height 122 or Neck girth 281)Figure 3 Examples of labels for girls wear garments 1) Examples of additional information included in accordance with 5.3. SANS 1360-7:2008 Edition 1.1 9 Appendix A2)Applicable standards Reference is made to the latest issues of the
31、 following standards: ISO 4416, Size designation of clothes Womens and girls underwear, nightwear, foundation garments and shirts. SANS 10184 (SABS 0184), Definitions for and measurement of body dimensions. Appendix B Examples of relevant garments B.1 Garments covering the upper body only a) Shirts.
32、 b) Sports shirts, casual shirts, T-shirts. c) Vests. d) Foundation garments (brassieres). B.2 Garments covering the whole body a) Bodysuits, gym suits. b) Slips. c) Foundation garments (corselets). d) Nightwear (nightdresses, nightgowns, pyjamas). B.3 Garments covering the lower body only. a) Knickers, panties, drawers, leg briefs. b) Half-slips. c) Foundation garments (corsets, girdles). Standards South Africa 2) The information in the appendices is additional to that in this part of the specification and has been included purely for amplification and guidance.
