SANS 13909-7-2001 Hard coal and coke - Mechanical sampling Part 7 Methods for determining the precision of sampling sample preparation and testing《硬煤和焦炭 机械取样 第7部分：取样精度测定方法，样品制备方法及试.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASD-STAN PREN 3453-1995 Aerospace Series Titanium TI-P99003 not Heat Treated Grade 2 Forging Stock for Annealed Forgings a or D Less Than or Equal to 300 mm (Edition P 2)《航空航天系列 a或.pdf

ASD-STAN PREN 3454-1995 Aerospace Series Titanium Alloy TI-P19001 not Heat Treated Grade 2 Forging Stock for Annealed Forgings a or D Less Than or Equal to 300 mm (Edition P2)《航空航天.pdf

ASD-STAN PREN 3455-1995 Aerospace Series Titanium Alloy TI-P19001 not Heat Treated Grade 2 Forging Stock for Solution Treated and Aged Forgings a or D Less Than or Equal to 300 mm .pdf

ASD-STAN PREN 3456-2010 Aerospace series Titanium alloy TI-P64001 (Ti-6Al-4V) Annealed Sheet and strip hot rolled a less than or equal to 6 mm (Edition P 3)《航空航天系列 a≤6mm的钛合金TI-P640.pdf

ASD-STAN PREN 3460-1996 Aerospace Series Titanium TI-P99002 Annealed Bar for Machining a or D Less Than or Equal to 150 mm Rm Greater Than or Equal to 390 MPa (Edition P 2)《航空航天系列 .pdf

ASD-STAN PREN 3461-1994 Aerospace Series Titanium TI-P99003 Annealed Bar for Machining D Less Than or Equal to 150 mm 540 MPa Less Than or Equal to Rm Less Than or Equal to 740 MPa.pdf

ASD-STAN PREN 3462-1994 Aerospace Series Titanium Alloy TI-P19001 Annealed Bar for Machining D Less Than or Equal to 150 mm (Edition P 2)《航空航天系列 D≤150mm的切削加工用钛合金TI-P19001退火棒材 第P2版》.pdf

ASD-STAN PREN 3463-1994 Aerospace Series Titanium Alloy TI-P19001 Solution Heat Treated and Aged Bar for Machining D Less Than or Equal to 75 mm (Edition P 2)《航空航天系列 D≤75mm的切削加工用钛合.pdf

ASD-STAN PREN 3465-1995 Aerospace Series Titanium Alloy TI-P63001 not Heat Treated Grade 2 Forging Stock for Solution Treated and Aged Forgings a or D Less Than or Equal to 360 mm .pdf