SANS 15945-2002 Information technology - Security techniques - Specification of TTP services to support the application of digital signatures《信息技术 安全技术 支持数字签名应用的TTP服务规范》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM D2555-2017a Standard Practice for Establishing Clear Wood Strength Values《用于确定清晰的木材强度值的标准实施规程》.pdf

ASTM D2556-1993a(2005) Standard Test Method for Apparent Viscosity of Adhesives Having Shear-Rate-Dependent Flow Properties《具有切变速率决定其流速性能的胶粘剂的表观粘度的标准试验方法》.pdf

ASTM D2556-2011 Standard Test Method for Apparent Viscosity of Adhesives Having Shear-Rate-Dependent Flow Properties 《用切变速率决定其流动性能的胶粘剂的表观粘度的标准试验方法》.pdf

ASTM D2556-2014 Standard Test Method for Apparent Viscosity of Adhesives Having Shear-Rate-Dependent Flow Properties Using Rotational Viscometry《用切变速率决定其流动性能的胶粘剂的表观粘度的标准试验方法》.pdf

ASTM D2557-1998(2004) Standard Test Method for Tensile-Shear Strength of Adhesives in the Subzero Temperature Range from -267 8 to -55&176C (-450 to -67&176F)《温度为-267 8至-55℃(-450至-.pdf

ASTM D2557-1998(2010)e1 Standard Test Method for Tensile-Shear Strength of Adhesives in the Subzero Temperature Range from -267 8 to -55&176C (-450 to -67&176F)《温度为-267 8至-55176C(-.pdf

ASTM D2559-2004 Standard Specification for Adhesives for Structural Laminated Wood Products for Use Under Exterior (Wet Use) Exposure Conditions《室外潮湿环境中层压结构木制品用胶粘剂的标准规范》.pdf

ASTM D2559-2009 Standard Specification for Adhesives for Structural Laminated Wood Products for Use Under Exterior (Wet Use) Exposure Conditions.pdf

ASTM D2559-2010 Standard Specification for Adhesives for Structural Laminated Wood Products for Use Under Exterior (Wet Use) Exposure Conditions《室外潮湿条件下用结构层压木材制品用胶粘剂标准规范》.pdf