SANS 1636-2007 Manually operated chain lever hoists《手动链式杠杆起重机》.pdf

相关资源

GB T 30561-2014 起重机 刚性 桥式和门式起重机.pdf

GB T 17909.2-2010 起重机 起重机操作手册 第2部分：流动式起重机.pdf

JIS D6301-2001 汽车起重机、轮式起重机和履带式起重机的结构和性能标准.pdf

BS EN 13000-2010 Cranes - Mobile cranes《起重机 移动式起重机》.pdf

GB T 6974.5-2008 起重机.术语.第5部分 桥式和门式起重机.pdf

ASME B30 4-2003 Portal Tower and Pedestal Cranes (B30 4 - 2003)《龙门式起重机、塔式起重机和基座式起重机》.pdf

STAS SR ISO 8306-1985 Cranes - Overhead travelling cranes and portal bridge cranes -Tolerances for cranes and tracks《起重机 桥式起重机和门式起重机，起重机和轨道的公差 》.pdf

GB T 6974.2-2017 起重机 术语 第2部分：流动式起重机.pdf

GB T 20863.2-2016 起重机 分级 第2部分：流动式起重机.pdf

猜你喜欢

STAS SR ISO 3049-1996 Gypsum plasters - Determination of physical properties of powder《石膏膏药．粉末的物理性质测定 》.pdf

STAS SR ISO 3057-1993 Non-destructive testing Metallographic replica techniques of surface examination《非破坏性试验．表面检查的金相复制技术》.pdf

STAS SR ISO 3058-1993 Non-destructive testing Aids to visual inspection Selection of low-power magnifiers《非破坏性试验．目视检查的辅助手段．低功率放大器的选择》.pdf

STAS SR ISO 3069-1995 End-suction centrifugal pumps Dimensions of cavities for mechanical seals and for soft packing.《末端抽吸离心泵．机械密封和软包装的腔洞尺寸 》.pdf

STAS SR ISO 3070-0-1982 Acceptance conditions for boring and milling machines with horizontal spindle - Testing of the accuracy -Part 0 General introduction《卧式镗铣床检验条件．精度检验．第0部分：总论.pdf

STAS SR ISO 3070-3-1982 Acceptance conditions for boring and milling machines - Testing of the accuracy - Part 3 Planer type machines with movable column《镗铣床检验条件．精度检验．第3部分：带移动立柱的台.pdf

STAS SR ISO 3071-1995 Textiles - Determination of pH of the aqueous extract《纺织品．水提物的PH值测定 》.pdf

STAS SR ISO 3072-1996 Wool - Determination of solubility in alkali《羊毛．在碱中溶解度的测定 》.pdf

STAS SR ISO 3073-1996 Wool - Determination of acid content《羊毛．酸含量的测定 》.pdf