SANS 1700-17-14-1998 Fasteners Part 17 Pins Section 14 Grooved pins - One-third-length centre grooved《紧固件 第17部分：销 第14节：槽销 中部槽长为1 3全长》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

HB Z 15-1987 模线晒相.pdf

HB Z 150-1989 模体组合冲模组装.pdf

HB Z 151-1989 航空发动机燃油与控制系统柱塞式燃油泵设计指南.pdf

HB Z 152-1989 航空发动机燃油与控制系统喷嘴.挡板液压元件设计指南.pdf

HB Z 153-1989 航空发动机燃油与控制系统圆截面定值节流嘴设计指南.pdf

HB Z 154-1989 航空用钢及高温合金熔炼和成材工艺认可规范.pdf

HB Z 155-1989 航空用钢及高温合金供应厂工程认可规范.pdf

HB Z 156-1989 航空用钢及高温合金锻件生产工艺认可规范.pdf

HB Z 157-1990 民机用金属材料供应厂认可规范.pdf