SANS 1700-18-7-2004 Fasteners Part 18 Rivets Section 7 Closed end blind rivets with break pull mandrel and protruding head - St St《紧固件 第18部分：铆钉 第7节：封闭型盘头抽芯盲铆钉 St St》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

GB T 8910.3-2004 手持便携式动力工具 手柄振动测量方法 第3部分;凿岩机和回转锤.pdf

GB T 8910.4-2008 手持便携式动力工具.手柄振动测量方法.第4部分 砂轮机.pdf

GB T 8910.5-2008 手持便携式动力工具.手柄振动测量方法.第5部分 建筑工程用路面破碎机和镐.pdf

GB T 8910.6-2006 手持便携式动力工具.手柄振动测量方法.第6部分 冲击钻.pdf

GB T 8911-1988 居住区大气中一氧化碳卫生标准检验方法汞置换法.pdf

GB T 8912-1988 居住区大气中砷化物卫生标准检验方法二乙氨基二硫代甲酸银分光光度法.pdf

GB T 8913-1988 居住区大气中二氧化硫卫生标准检验方法四氯汞盐盐酸副玫瑰苯胺分光光度法.pdf

GB T 8914-1988 居住区大气中汞卫生标准检验方法金汞齐富集 原子吸收法.pdf

GB T 8923.1-2011 涂覆涂料前钢材表面处理.表面清洁度的目视评定.第1部分：未涂覆过的钢材表面和全面清除原有涂层后的钢材表面的锈蚀等级和处理等级.pdf