SANS 1700-4-1-2003 Fasteners Part 4 Tolerances Section 1 Tolerances for fasteners - Bolts screws studs and nuts - Product grades A B and C《紧固件 第4部分：公差第1节：紧固件公差 螺栓；螺钉；螺柱和螺母 产品等级A，B和.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

CB-Z 106-1968 铝合金船体结构铆接分类及质量检验要求.pdf

CB-Z 120-1986 604、607钢铸件缺陷补焊技术条件.pdf

CB-Z 120-2008 604、607钢铸件缺陷补焊.pdf

CB-Z 121-1998 舰艇用921A等钢板缺陷补焊技术要求.pdf

CB-Z 124-1998 潜艇921A等钢结构焊接技术要求.pdf

CB-Z 125-1998 潜艇船体结构焊接质量检验规则.pdf

CB-Z 126-1998 潜艇耐压船体可拆板切割、装配和焊接技术要求.pdf

CB-Z 127-2004 潜艇电气设备安装工艺.pdf

CB-Z 128-1998 舰船电气设备保养工艺.pdf