1、 Collection of SANS standards in electronic format (PDF) 1. Copyright This standard is available to staff members of companies that have subscribed to the complete collection of SANS standards in accordance with a formal copyright agreement. This document may reside on a CENTRAL FILE SERVER or INTRA
2、NET SYSTEM only. Unless specific permission has been granted, this document MAY NOT be sent or given to staff members from other companies or organizations. Doing so would constitute a VIOLATION of SABS copyright rules. 2. Indemnity The South African Bureau of Standards accepts no liability for any
3、damage whatsoever than may result from the use of this material or the information contain therein, irrespective of the cause and quantum thereof. ISBN 978-0-626-20898-1 SANS 2374:2008Edition 1ISO 2374:1983Edition 1SOUTH AFRICAN NATIONAL STANDARD Lifting appliances Range of maximum capacities for ba
4、sic models This national standard is the identical implementation of ISO 2374:1983 and is adopted with the permission of the International Organization for Standardization. Published by Standards South Africa 1 dr lategan road groenkloof private bag x191 pretoria 0001 tel: 012 428 7911 fax: 012 344
5、1568 international code +27 12 www.stansa.co.za Standards South Africa SANS 2374:2008 Edition 1 ISO 2374:1983 Edition 1 Table of changes Change No. Date Scope National foreword This South African standard was approved by National Committee StanSA TC 5120.59, Cranes, in accordance with procedures of
6、Standards South Africa, in compliance with annex 3 of the WTO/TBT agreement. This SANS document was published in January 2008. Gi - International Standard INTERNATIONAL ORGANIZATION FOR STANDARDIZATIONWMEIKAYHAPOL1HAR OPTAHM3AUHR fl0 CTAHAPTl43ALWlORGANISATION INTERNATIONALE DE NORMALISATION Lifting
7、 appliances - Range of maximum capacities for basic models Appareils de levage - Gamme des charges nominales pour les modeles de base First edition - 1983-11-15 UDC 621.873/.877 : 62-18 Ref. No. ISO 2374-1983 (EI Descriptors : Iifting equipment, cranes (hoists), ratings, nominal capacity. 0 E Price
8、based on 1 page SANS 2374:2008This s tandard may only be used and printed by approved subscription and freemailing clients of the SABS .Foreword ISO (the International Organization for Standardization) is a worldwide federation of national Standards bodies (ISO member bedies). The work of developing
9、 International Standards is carried out through ISO technical committees. Every member body interested in a subject for which a technical committee has been authorized has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with I
10、SO, also take part in the work. Draft International Standards adopted by the technical committees are circulated to the member bodies for approval before their acceptance as International Standards by the ISO Council. International Standard 2374 was developed by Technical Committee ISO/TC 96, Cranes
11、, lifting appliances and related eguipment, and was circulated to the member bodies in February 1983. lt has been approved by the member bodies of the following countries: Australia Fin land Austria France Belgium Germany, F. R. Brazil India China Israel Czechoslovakia Italy Egypt, Arab Rep. of Kore
12、a, Dem. P. Rep. of Netherlands Norway Poland United Kingdom USSR No member body expressed disapproval sf the document. 0 International Organkation for Standardkation, 1983 Printed in Switzerland SANS 2374:2008This s tandard may only be used and printed by approved subscription and freemailing client
13、s of the SABS .IINTERNATIONAL STANDARD ISO 2374-1983 (E) Lifting appliances - Range of maximum capacities for basic models 1 Scope and field of application This International Standard sets forth the recommended range of maximum capacities of cranes from 0,l to 1 000 t. This International Standard ap
14、plies to all types of cranes. 2 Definitions For the purpose of this International Standard, the foilowing definitions apply. 2.1 maximum capacity; safe working load: The maxi- mum load to be suspended from the lifting appliance as defined for the particular types of cranes and for the specified cond
15、i- tions with regard to the group classification. For jib-type appliances, the maximum capacity is taken at minimum permissible jib length and radius for the working con- figuration. NOTE - Maximum capacity has many Synonyms such as safe working load, lifting capacity ; however, maximum capacity is
16、preferred. 2.2 basic model: The main version on the basis of which further Versions (modifications) of lifting appliances tan be developed, differing in length of jib and/or tower, type of run- ning gear, rope fall of reeving System, etc., whose maximum capacity is determined by the design calculati
17、on. 3 Range of maximum capacities for basic models The range of maximum capacities should conform to that listed in the following table. Ta ble - Maximum capacities for basic models Values in tonnes 61 1 10 100 1000 - - (11,2) (112) 0,125 1,25 12,5 125 - - (14) (140) 0,16 13 16 160 - - (18) (180) 02
18、 2 20 200 - - (22,5) (225) 0,25 2,5 25 250 - - (28) (280) 0,32 32 32 320 - - (36) (360) 0,4 4 40 400 - - (45) (450) 0,5 5 50 500 - - (56) (560) o,a 6,3 63 630 - - (71) (710) W3 8 80 800 - - (90) (900) NOTE - Use of the values of maximum capacities shown in paren- theses should be avoided. SANS 2374:2008 Standards South AfricaThis s tandard may only be used and printed by approved subscription and freemailing clients of the SABS .
