1、 Collection of SANS standards in electronic format (PDF) 1. Copyright This standard is available to staff members of companies that have subscribed to the complete collection of SANS standards in accordance with a formal copyright agreement. This document may reside on a CENTRAL FILE SERVER or INTRA
2、NET SYSTEM only. Unless specific permission has been granted, this document MAY NOT be sent or given to staff members from other companies or organizations. Doing so would constitute a VIOLATION of SABS copyright rules. 2. Indemnity The South African Bureau of Standards accepts no liability for any
3、damage whatsoever than may result from the use of this material or the information contain therein, irrespective of the cause and quantum thereof. ICS 33.060.30 ISBN 0-626-17394-9 SANS 301213-1:2005Edition 1 ETSI EN 301213-1:2002Edition V1.1.2SOUTH AFRICAN NATIONAL STANDARD Fixed Radio Systems; Poin
4、t-to-multipoint equipment; Point-to-multipoint digital radio systems in frequency bands in the range 24,25 GHz to 29,5 GHz using different access methods Part 1: Basic parameters This national standard is the identical implementation of ETSI EN 301213-1:2002 and is adopted with the permission of the
5、 European Telecommunications Standards Institute. Published by Standards South Africa 1 dr lategan road groenkloof private bag x191 pretoria 0001 tel: 012 428 7911 fax: 012 344 1568 international code + 27 12 www.stansa.co.za Standards South Africa SANS 301213-1:2005 Edition 1 ETSI EN 301213-1:2002
6、Edition V1.1.2 Table of changes Change No. Date Scope Abstract Specifies the minimum requirements for system parameters of Point-to-Multipoint (P-MP) Radio and Multipoint-to-Multipoint (MP-MP) Systems in the terrestrial Fixed Services (FS) operating in the bands 24,5 GHz to 29,5 GHz. Keywords DRRS,
7、multipoint, radio, RLL, transmission. National foreword This South African standard was approved by National Committee StanSA TC 74, Communication technology, in accordance with procedures of Standards South Africa, in compliance with annex 3 of the WTO/TBT agreement. In South Africa, spectrum band
8、plans are regulated by the Independent Communications Authority of South Africa (ICASA). The South African Table of Frequency Allocations is obligatory for South Africa and will override any reference to frequency ranges as mentioned in this part of SANS 301213. ETSI EN 301 213-1 1.1.2(2002-02) Euro
9、pean Standard (Telecommunications series) Fixed Radio Systems; Point-to-multipoint equipment; Point-to-multipoint digital radio systems in frequency bands in the range 24,25 GHz to 29,5 GHz using different access methods; Part 1 : Basic parameters ETSl EN 301 213-1 V1.1.2 (2002-02) Reference RENITM-
10、04124 Keywords DRRS, multipoint, radio, RLL, transmission ETSl 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.:+33492944200 Fax: +334936547 16 Siret No 348 623 562 00017 - NAF 742 C Association a but non lucratif enregistree a la Sous-Prefecture de Grasse (06) No 7803188 Importan
11、t notice Individual copies of the present document can be downloaded from: :l/www.etsi.org The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the reference version is the Porta
12、ble Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSl Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information
13、 on the current status of this and other ETSl documents is available at http:/lportal.etsi.orqltblstatuslstatus.asp If you find errors in the present document, send your comment to: editoretsi.fr Covriaht Notification No part may be reproduced except as authorized by written permission. The copyrigh
14、t and the foregoing restriction extend to reproduction in all media. O European Telecommunications Standards Institute 2002. All rights reserved. 3 ETSl EN 301 213-1 V1.1.2 (2002-02) Contents Intellectual Property Rights 5 Foreword . 5 Introduction 6 1 Scope 7 2 References 8 3 Definitions. symbols a
15、nd abbreviations 11 3.1 Definitions 11 3.2 Symbols 11 3.3 . . Abbreviations . 11 General characteristics . 13 . General system architecture 13 Frequency bands and channel arrangements 14 Channel plan . 14 Channel arrangements . 14 Compatibility requirements 14 Environmental conditions . 14 Equipment
16、 within weather protected locations (indoor locations) 14 Equipment for non-weather protected locations (outdoor locations) 15 Power supply 15 Electromagnetic compatibility conditions 15 TMN interfaces 15 Synchronization of interface bit rates 15 Branchinglfeederlantenna requirements 15 Wave guide f
17、langes . 16 Return loss 16 Intermodulation products . 16 5 System parameters 16 5.1 System capacity 16 5.2 Round trip delay 16 5.3 Transparency 17 5.4 Voice coding methods 17 5.5 Transmitter characteristics 17 . 5.5.1 Transmitter output power 17 5.5.2 Transmitter nominal output power 18 5.5.3 Transm
18、it power and frequency control . 18 5.5.3.1 Automatic Transmit Power Control (ATPC) 18 5.5.3.2 Remote Transmit Power Control (RTPC) . 18 5.5.3.3 Remote Frequency Control (RFC) 18 5.5.4 RF spectrum mask 18 5.5.5 Tx Local Oscillator frequency arrangements 18 5.5.6 Spurious emissions (external) . 19 5.
19、5.7 Radio frequency tolerance . 19 . . 5.6 Receiver characteristics 19 5.6.1 Rx Local Oscillator frequency arrangements . 19 5.6.2 Spurious emissions . 19 5.6.3 Receiver IF . 19 5.7 System performance 19 5.7.1 Dynamic level range 19 5.7.2 BER as a function of Receiver input Signal Level (RSL) . 19 5
20、.7.3 Equipment Background BER . 19 5.7.4 Interference sensitivity 20 5.7.4.1 Co-channel interference sensitivity (external) 20 5.7.4.2 Adjacent channel interference . 20 ETSl 4 ETSl EN 301 213-1 V1.1.2 (2002-02) 5.7.4.3 Continuous Wave (CW) interference 20 . 5.7.5 Distortion sensitivity 20 6 Types o
21、f interfaces at the subscriber equipment and the network exchange 21 Annex A (informative): Bibliography . 22 History 23 ETSl Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPR
22、s, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notlJied to ETSI in respect of ETSIstandards“, which is available from the ETSI Secretariat. Latest updates are avai
23、lable on the ETSI Web server (http:/webapp.etsi.org/IPRhome.asp). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 3 14 (or the updates on the ETSI Web se
24、rver) which are, or may be, or may become, essential to the present document. Foreword This European Standard (Telecommunications series) has been produced by ETSI Technical Committee Transmission and Multiplexing (TM). The present document contains the minimum technical requirements to ensure compa
25、tibility of products and conformance with radio regulations across ETSI member states. Radio equipment from different manufacturers are not required to interwork at radio frequency (i.e. no common air interface). The present document defines the requirements for radio-relay equipment and associated
26、interfaces. The present document is intended to cover a variety of systems designed for a variety of services, applications, performance objectives and deployment conditions. Therefore it is necessary if applicable to include in the present document different sets of system parameters. In the presen
27、t document these sets of parameters are referred to as “system types“. The present document is part 1 of a multipart deliverable covering the Point-to-multipoint equipment; Point-to-multipoint digital radio systems in frequency bands in the range 24,25 GHz to 29,5 GHz using different access methods,
28、 as identified below: Part 1: “Basic parameters“; Part 2: “Frequency Division Multiple Access (FDMA) methods“; Part 3: “Time Division Multiple Access (TDMA) methods“; Part 4: “Direct Sequence Code Division Multiple Access (DS-CDMA) methods“; Part 5: “Multi-Carrier Time Division Multiple Access (MC-T
29、DMA) methods“. Parts 2, 3, 4 and 5 are intended to be used in conjunction with the present document, describing the basic parameters common to all access methods. References in EN 301 213 parts 2 4, 3 5, 4 6 and 5 7 to technical parameters for P-MP systems apply equally to MP-MP systems. A basic des
30、cription of the different access methods and a comparison among them are provided in TR 101 274 8. The present version differs from the previous one for editorial up-dating consequent to the publication of new ERC Recommendations for FWA in these bands, to publication of EN 30 1 2 13-4 6 and EN 301
31、2 13-5 7 and to recent terminology used in the other parts of the present document. Moreover, alignment to the recent status of EMC ENS harmonized under R - concentration; - transparency. Radio is often the ideal way of obtaining communications at low cost and almost independent of distance, and dif
32、ficult topography. Moreover, a small number of sites are required for these installations, thus facilitating rapid implementation and minimizing maintenance requirements of the systems. Concentration means that m subscribers can share n radio channels (m being larger than n), allowing a better use t
33、o be made of the available frequency spectrum and at a lower equipment cost. The term “multi-access“ derives from the fact that every subscriber has access to every channel (instead of a fixed assignment as in most multiplex systems). When a call is initiated one of the available channels is allocat
34、ed to it. When the call is terminated, the channel is released for another call. Concentration requires the use of distributed intelligent control which in turn allows many other operations and maintenance functions to be added. Transparency means that the exchange (service node) and the subscriber
35、equipment communicate with each other without being aware of the radio link. Scope The present document specifies the minimum requirements for system parameters of Point-to-Multipoint (P-MP) Radio and Multipoint-to-Multipoint (MP-MP) Systems in the terrestrial Fixed Services (FS) operating in the ba
36、nds 24,s GHz to 29,5 GHz. Multipoint (MP) Radio-Relay Systems use in principle three different access methods, taking into account the basic physical parameters of the frequency, the code and the time. This leads to the three basic access methods of: - Frequency Division Multiple Access (FDMA); - Co
37、de Division Multiple Access (CDMA); - Time Division Multiple Access (TDMA). In addition, in particular for wide-band applications, a multi-carrier transmission implementation may be applied, where each sub-carrier uses one of the above access methodologies. It should be noted that MP-MP systems diff
38、er from P-MP systems in that Terminal Stations may be connected directly to one another in a series of short links and generally act as repeaters for traffic carried on to other stations. The arrangement of links varies over time to accommodate changes in propagation characteristics and changes in t
39、he subscriber base. The MP system in the band 24,s GHz to 29,s GHz (ERCIREC TR 13-02 I) will provide access to both public and private networks (PSTN, PDN, etc.) by means of the various standardized network interfaces (e.g. 2-wire loop and ISDN ranging from basic rate to n x 2 Mbitls as well as loca
40、l area to wide area data networks interfaces). The system may be applied to build new access networks by means of a multi cellular architecture, covering urban and suburban areas. MP systems are generally configured as Pre-Assigned Multiple Access (PAMA) or as Demand Assigned Multiple Access (DAMA)
41、Radio Systems. The present document covers the following MP applications: - voice; - fax; - voice band data: - telex; related to analogue interfaces; and - 64 kbitls; - ISDN; - digital video; - digital audio; - Internet access; related to digital interfaces; - further applications like ATM, Frame Re
42、lay, LAN; WAN may also be provided. The equipment covered by EN 301 213 should be designed to be able to meet the network performance requirements foreseen by ITU-R Recommendations F.696-2 9 and F.697-2 lo, for medium and local grade portion or ITU-R Recommendation F. 11 89-1 1 11 for the national p
43、ortion (access or short haul) of the digital connection following the criteria defined in ITU-T Recommendation(s) G.82 1 12 andlor G.826 13. The availability requirements are under further study by the relevant bodies. Network operators may choose different performance and availability requirements
44、in order to extend the possible area of application thus fitting to their network needs. Radio terminals from different manufacturers are not intended to interwork at radio frequency (i.e. no common air interface). Regulatory bodies should take into account the inband coexistence between MP systems
45、using differing access methods. The present document defines the requirements of radio terminal and radio-relay equipment including the interfaces. The requirements for multiplex, network management and antennalfeeder equipment may be addressed elsewhere. References The following documents contain p
46、rovisions which, through reference in this text, constitute provisions of the present document. References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For a specific reference, subsequent revisions do not apply. For a non-specific
47、reference, the latest version applies. I ERCIREC TIR 13-02, annex B and annex C: “Preferred channel arrangements for fixed services in the range 22,O - 29,5 GHz“. 21 ERCIREC 00-05: “Use of the band 24.5 - 26.5 GHz for fixed wireless access“. PI ERCIREC 01-03: “Use of parts of the band 27.5 - 29.5 GH
48、z for Fixed Wireless Access (FWA)“. 41 ETSI EN 301 213-2: “Fixed Radio Systems; Point-to-multipoint equipment; Point-to-multipoint digital radio systems in frequency bands in the range 24,25 GHz to 29,5 GHz using different access methods; Part 2: Frequency Division Multiple Access (FDMA) methods“. 5
49、1 ETSI EN 30 1 2 13-3 : “Fixed Radio Systems; Point-to-multipoint equipment; Point-to-multipoint digital radio systems in frequency bands in the range 24,25 GHz to 29,5 GHz using different access methods; Part 3: Time Division Multiple Access (TDMA) methods“. 61 ETSI EN 301 213-4: “Fixed Radio Systems; Point-to-multipoint equipment; Point-to-multipoint digital radio systems in frequency bands in the range 24,25 GHz to 29,5 GHz using different access methods; Part 4: Direct Sequence Code Division Multiple Access (DS-CDMA) methods“. ETSI EN 301 213-5: “Fi
