1、 Collection of SANS standards in electronic format (PDF) 1. Copyright This standard is available to staff members of companies that have subscribed to the complete collection of SANS standards in accordance with a formal copyright agreement. This document may reside on a CENTRAL FILE SERVER or INTRA
2、NET SYSTEM only. Unless specific permission has been granted, this document MAY NOT be sent or given to staff members from other companies or organizations. Doing so would constitute a VIOLATION of SABS copyright rules. 2. Indemnity The South African Bureau of Standards accepts no liability for any
3、damage whatsoever than may result from the use of this material or the information contain therein, irrespective of the cause and quantum thereof. ISBN 978-0-626-21149-3 SANS 50358:2008Edition 2EN 358:1999Edition 2SOUTH AFRICAN NATIONAL STANDARD Personal protective equipment for work positioning and
4、 prevention of falls from a height Belts for work positioning and restraint and work positioning lanyards This national standard is the identical implementation of EN 358:1999 and is adopted with the permission of CEN, rue de Stassart 36, B-1050 Brussels. Published by Standards South Africa 1 dr lat
5、egan road groenkloof private bag x191 pretoria 0001 tel: 012 428 7911 fax: 012 344 1568 international code + 27 12 www.stansa.co.za Standards South Africa SANS 50358:2008 Edition 2 EN 358:1999 Edition 2 Table of changes Change No. Date Scope National foreword This South African standard was approved
6、 by National Committee StanSA SC 5120.11A, Personal protective equipment Industrial safety belts, fall arrest systems and industrial rope access, in accordance with procedures of Standards South Africa, in compliance with annex 3 of the WTO/TBT agreement. This SANS document was published in June 200
7、8. This SANS document supersedes SABS EN 358:1992 (first edition). EUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN 358December 1999ICS 13.340.99 Supersedes EN 358:1992English versionPersonal protective equipment for work positioning andprevention of falls from a height - Belts for work positioning
8、 andrestraint and work positioning lanyardsEquipement de protection individuelle de maintien au travailet de prvention des chutes de hauteur - Ceintures demaintien au travail et de retenue et longes de maintien autravailPersnliche Schutzausrstung fr Haltefunktionen und zurVerhinderung von Abstrzen -
9、 Haltegurte undVerbindungsmittel fr HaltegurteThis European Standard was approved by CEN on 27 October 1999.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alterati
10、on. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
11、under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Lux
12、embourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGCentral Secretariat: rue de Stassart, 36 B-1050 Brussels 1999 CEN All rights of exploitation in any form and by any
13、means reservedworldwide for CEN national Members.Ref. No. EN 358:1999 EPage 2EN 358:1999ContensPageForeword .2Introduction .31 Scope .32 Normative references 33 Definitions 44 Requirements 45 Testing.66 Information supplied by the manufacturer, marking and packing 9Annex ZA (informativ) Clauses of t
14、his European Standard addressing essential requirementsor other provisions of EU Directives 11ForewordThis European Standard has been prepared by Technical Committee CEN/TC 160 “Protection against falls fromheight including working belts“, the secretariat of which is held by DIN.This European Standa
15、rd supersedes EN 358:1992.This European Standard shall be given the status of a national standard, either by publication of an identical text orby endorsement, at the latest by June 2000, and conflicting national standards shall be withdrawn at the latest byJune 2000.This European Standard has been
16、prepared under a mandate given to CEN by the European Commission and theEuropean Free Trade Association, and supports essential requirements of EU Directive(s).For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this standard.According to the CEN/CENELEC Int
17、ernal Regulations, the national standards organizations of the followingcountries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland,France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden,Switzerland a
18、nd the United Kingdom.Page 3EN 358:1999IntroductionWhen work undertaken at a height is of short duration, or for technical reasons the provision of a working platform,suitable barriers and other similar safeguards is impracticable, then the prevention from falling from a height whilstperforming corr
19、ectly the related work activity can be achieved by the use of personal protective equipment.Equipment when manufactured according to this standard is designed to either secure the user safely in position atthe point of work (work positioning); or, prevent the user from reaching a position where a fa
20、ll can occur (restraint).It is essential to note that such personal equipment by design does not meet the requirements necessary for thepurposes of fall arrest, it may be necessary to supplement it with collective or personal means of protection againstfalls from a height, and its safe use, in pract
21、ice, relies upon the effective training and instruction of the user.1 ScopeThis European standard applies to belts and lanyards intended for the purpose of work positioning or restraint. Itspecifies the requirements, testing, marking and information supplied by the manufacturer.2 Normative reference
22、sThis European Standard incorporates by dated or undated reference, provisions from other publications. Thesenormative references are cited at the appropriate places in the text and the publications are listed hereafter. Fordated references, subsequent amendments to or revisions of any of these publ
23、ications apply to this EuropeanStandard only when incorporated in it by amendment or revision. For undated references the latest edition of thepublication referred to applies .EN 137 : 1993Respiratory protective devices; self-contained open-circuit compressed air breathing apparatus; requirements,te
24、sting, markingEN 354Personal protective equipment against falls from a height - LanyardsEN 361Personal protective equipment against falls from a height - Full body harnessesEN 362Personal protective equipment against falls from a height - ConnectorsEN 363Personal protective equipment against falls f
25、rom a height - Fall arrest systemsEN 364 : 1992Personal protective equipment against falls from a height - Test methodsEN 365Personal protective equipment against falls from a height - General requirements for instructions for use andmarkingEN 892Mountaineering equipment - Dynamic mountaineering rop
26、es - Safety requirements and test methodsEN 12277 : 1998Mountaineering equipment - Harnesses - Safety requirements and test methodsISO 9227Corrosion tests in artificial atmospheres - Salt spray test3 DefinitionsFor the purposes of this standard the following definitions apply.3.1 Attachment elementA
27、 load bearing element provided for the connection of other components.Page 4EN 358:19993.2 ComponentA part of a system at a point of sale by the manufacturer, supplied with packaging, marking and information suppliedby the manufacturer. Body supports (including waist belts) and lanyards are examples
28、 of components of systems.(see EN 363)3.3 ElementA part of a component or a sub-system. Ropes, webbing, attachment elements, fittings and anchorage lines areexamples of elements.3.4 RestraintA technique whereby a person is prevented by means of personal protective equipment from reaching zones where
29、the risk of a fall from a height exists.3.5 Waist beltA body support that encircles the body at the waist.3.6 Work positioningA technique that enables a person to work supported by personal protective equipment in tension in such a way thata fall is prevented.3.7 Work positioning lanyardA component
30、used to connect a waist belt to an anchor point, or to a structure by encircling it, as a means ofsupport. 4 Requirements4.1 Design and construction4.1.1 Waist belt4.1.1.1 A waist belt shall be designed to enable the wearer to perform his work without undue discomfort andremain secure against the ha
31、zard of a fall from a height. Essential fastening and adjustment elements shall remainaccessible to the wearer and shall operate effectively when manipulated by hand.4.1.1.2 A waist belt shall be not less than 43 mm wide and shall be capable of adjustment to fit the wearer. Thewaist belt shall have
32、at least one attachment element intended for the connection of load bearing components. Thewaist belt shall meet the performance requirements specified in 4.2.4.1.1.3 The fastening and adjustment elements of a waist belt shall be designed and constructed so that whencorrectly fastened, involuntary r
33、elease or opening of the element cannot occur. When fastening or adjustmentelements can be secured in more than one manner, then the waist belt shall comply with the performancerequirements of this standard when the elements are secured in each available manner.4.1.1.4 It shall be possible to carry
34、out a visual inspection of the waist belt and all its attachments even when thebelt is incorporated into a garment or if it is a component in a full body harness.4.1.1.5 A waist belt not fitted with a back support and intended for work positioning purposes shall be not less than80 mm wide.4.1.1.6 A
35、back support when fitted to a waist belt shall be designed to give physical support to the wearer withoutinhibiting either arm or leg movements. The minimum length of the back support shall be 50 mm longer than half thecircumference of the belt when adjusted to the maximum radial length (waist size)
36、 specified by the manufacturer.The minimum width of the back support shall be 100 mm for a length of 200 mm centred on the spine of the wearerand shall be a minimum of 60 mm elsewhere.4.1.1.7 When a waist belt is equipped with shoulder or leg straps they shall not impair use of the waist belt in any
37、way. No attachment element shall be connected to a shoulder or leg strap. Page 5EN 358:19994.1.1.8 When a waist belt is incorporated into other equipment e.g. a full body harness (see EN 361), then the waistbelt shall meet the performance requirements specified in 4.2.4.1.2 Work positioning lanyard4
38、1.2.1 A work positioning lanyard of fixed length shall meet the requirements of EN 354. It shall be intended for aspecific purpose which shall be detailed by the manufacturer. The length of such a work positioning lanyard shall bethe minimum length to achieve its specified purpose.4.1.2.2 A work po
39、sitioning lanyard equipped with a length adjustment element shall be capable of adjustment to theminimum length which enables freedom to work and prevents the wearer from falling when the lanyard isincorporated into a specified work positioning system.4.1.2.3 Every work positioning lanyard shall be
40、so constructed that involuntary release of the lanyard whenconnected to a waist belt is prevented. The material of the work positioning lanyard shall be terminated in such away that a length adjuster when fitted cannot be released from the lanyard involuntarily. When a work positioninglanyard can be
41、 assembled in more than one manner then the lanyard shall meet the performance requirementswhen tested with each method of assembly.4.1.2.4 A work positioning lanyard equipped with a length adjustment element shall be either:a) permanently attached to the waist belt at one end and have a connector c
42、ompatible with an attachmentelement fitted to the waist belt at the other end;b) detachable, in which case there shall be a connector at each end compatible with the attachmentelement(s) of the waist belt; or,c) detachable (and independent), whereby at least one end of the work positioning lanyard s
43、hall be capableof attachment to a suitable anchor point; and, the length adjustment element shall be capable of connectionto the waist belt attachment element either directly, or via a detachable lanyard of maximum length 0,5 m.4.1.2.5 The work positioning lanyards described in 4.1.2.4 a) and b) sha
44、ll have a maximum length of 2 m. The workpositioning lanyard described in 4.1.2.4 c) shall be assigned a length of 2 m for the purpose of testing but shall nothave a specified maximum length unless a limit is specified by the manufacturer.4.1.2.6 It shall be possible to carry out a visual inspection
45、 of all the elements incorporated into the work positioninglanyard.4.1.2.7 A work positioning lanyard shall meet the performance requirements of 4.2 when tested with a waist belt ofa type with which it is intended to be used.4.1.3 Materials4.1.3.1 Webbing and yarns shall be made from virgin filament
46、 or multifilament synthetic fibres suitable for the useintended. The breaking tenacity of the synthetic fibre shall be known to be at least 0,6 N/tex.4.1.3.2 Threads used for sewing shall be physically compatible with the webbing and of a quality comparable withthat of the webbing. They shall be of
47、a contrasting colour or shade in order to facilitate visual inspection.4.1.3.3 When a work positioning lanyard is intended for a special application then the material appropriate for thatspecification (e. g. chain or wire rope) shall be specified by the manufacturer.4.1.3.4 The material used in the
48、manufacture of a work positioning lanyard shall be known to have a minimumbreaking force of 22 kN.4.1.4 ConnectorsConnectors shall comply with EN 362.4.1.5 Thermal resilienceEquipment which is claimed to be suitable for use in high temperature environments (e. g. fire-fighting exposure)shall be test
49、ed in accordance with 6.3.1.4 of EN 137 : 1993 and shall not continue to burn for more than 5 s afterremoval from the test flame. Page 6EN 358:19994.2 Performance4.2.1 Static strength4.2.1.1 A waist belt shall be subjected to the static strength test described in 5.2.1 and shall withstand a force of15 kN for 3 min without releasing the cylinder.4.2.1.2 A waist belt with an integral work positioning lanyard shall be subjected to the static strength test describedin 5.2.2 and shall withstand a force of 15 kN for 3 min without releasing the cylinder.4.2.1.3 A work positioning
