SANS 5908-1979 Pyrometric cone equivalent (refractoriness) of refractory bricks and materials《耐火砖和耐火材料相应测温锥（耐火度）》.pdf

相关资源

JIS R2212-1-2006 耐火产品的化学分析方法.第1部分粘土耐火材料.pdf

JIS R2011-2007 含碳和或碳化硅耐火材料的化学分析法.pdf

JIS R2212-2-2006 耐火产品的化学分析方法.第2部分硅质耐火材料.pdf

JIS R2212-5-2006 耐火产品的化学分析方法.第5部分铬氧化镁耐火材料.pdf

AQ 2023-2008 耐火材料生产安全规程.pdf

DL T 777-2012 火力发电厂锅炉耐火材料.pdf

DL T 902-2004 耐磨耐火材料技术条件与检验方法.pdf

DL T 777-2001 火力发电厂锅炉耐火材料技术条件（一）.pdf

JC T 2196-2013 水泥回转窑用耐火材料使用规程.pdf

YB 4077-1991 铝碳质耐火材料化学分析方法 EDTA容量法测定氧化铝量.pdf

猜你喜欢

FORD WSS-M99P39-A3-2007 PERFORMANCE STEEL SHEET BORON TREATED ALUMINIZED HIGH STRENGTH (NORTH AMERICA APPLICATIONS) 1550 MPa MINIMUM ULTIMATE TENSILE STRENGTH - TO BE USED WITH FO.pdf

FORD WSS-M99P39-A3-2016 PERFORMANCE STEEL SHEET BORON TREATED ALUMINIZED HIGH STRENGTH 1550 MPa MINIMUM ULTIMATE TENSILE STRENGTH TO BE USED WITH FORD WSS-M99P1111-A (Shown on FO.pdf

FORD WSS-M99P39-A4-2007 PERFORMANCE STEEL SHEET BORON TREATED ALUMINIZED HIGH STRENGTH (NORTH AMERICA APPLICATIONS) 1600 MPa TYPICAL ULTIMATE TENSILE STRENGTH - TO BE USED WITH FO.pdf

FORD WSS-M99P39-A4-2016 PERFORMANCE STEEL SHEET BORON TREATED ALUMINIZED HIGH STRENGTH ULTIMATE TENSILE STRENGTH DEFINED ON PRINT TO BE USED WITH FORD WSS-M99P1111-A (Shown on FO.pdf

FORD WSS-M99P40-A-2009 SPRAYABLE BED LINER TWO COMPONENT POLYOL TO BE USED WITH FORD WSS-M99P1111-A 《可喷施的两组分多元醇厢衬 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD WSS-M99P40-A2-2009 SPRAYABLE BEDLINER TWO COMPONENT ISOCYANATE TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD WSS-M99P40-A)《可喷施的异氰酸酯两组分厢衬 与标准FORD WSS-M99P1111-A一起使用 列于.pdf

FORD WSS-M99P40-A3-2015 SPRAYABLE WEAR RESISTANT COATING TWO COMPONENT POLYOL NON-VISIBLE APPLICATIONS TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M99P40-A4-2015 SPRAYABLE WEAR RESISTANT COATING TWO COMPONENT ISOCYANATE NON-VISIBLE APPLICATIONS TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD WSS-M99P40-A3).pdf

FORD WSS-M99P41-A10-2014 LABEL PERFORMANCE NO ADHESIVE TO BE USED WITH FORD WSS-M99P1111-A .pdf