SANS 60060-3-2006 High-voltage test techniques Part 3 Definitions and requirements for on-site testing《高压试验技术 第3部分：现场测试的定义和要求》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD WSS-M2D476-A3-2016 THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO) 50% MINIMUM RECYCLED CONTENT HARDNESS 60 DUROMETER A TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M2D476-A4-2004 THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO) 50% MINIMUM RECYCLED CONTENT HARDNESS 70 DUROMETER A TO BE USED WITH FORD WSS-M99P1111-A (Shown on WSS-M2D476-A3).pdf

FORD WSS-M2D476-A4-2016 THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO) 50% MINIMUM RECYCLED CONTENT HARDNESS 70 DUROMETER A TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD WSS-M2D47.pdf

FORD WSS-M2D476-A5-2004 THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO) 50% MINIMUM RECYCLED CONTENT HARDNESS 80 DUROMETER A TO BE USED WITH FORD WSS-M99P1111-A (Shown on WSS-M2D476-A3).pdf

FORD WSS-M2D476-A5-2016 THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO) 50% MINIMUM RECYCLED CONTENT HARDNESS 80 DUROMETER A TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD WSS-M2D47.pdf

FORD WSS-M2D476-A6-2004 THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO) 50% MINIMUM RECYCLED CONTENT HARDNESS 90 DUROMETER A TO BE USED WITH FORD WSS-M99P1111-A (Shown on WSS-M2D476-A3).pdf

FORD WSS-M2D476-A6-2016 THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO) 50% MINIMUM RECYCLED CONTENT HARDNESS 90 DUROMETER A TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD WSS-M2D47.pdf

FORD WSS-M2D476-A7-2004 THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO) 100% RECYCLED RUBBER MODIFIED TO BE USED WITH FORD WSS-M99P1111-A (Shown on WSS-M2D476-A2)《100%再生橡胶改性的热塑性聚烯径弹性体 .pdf

FORD WSS-M2D476-A7-2016 THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO) 100% RECYCLED RUBBER MODIFIED TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD WSS-M2D476-A2).pdf