SANS 6016-2005 Transverse tensile (internal bond) strength of wood-based panels《木基壁板的横向抗拉（内部连结）强度》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

GOST 23409 0-1978 Moulding sands moulding and core sand mixtures General requirements for test methods《型砂、造型及型芯用的混合物 试样方法一般要求》.pdf

GOST 23409 1-1978 Moulding sands moulding and core sand mixtures Method for determination of calcium and magnesium oxides content《型砂、造型及型芯用的混合物 氧化钾含量测定法》.pdf

GOST 23409 10-1978 Moulding and core sand mixtures Method for determination of hygroscopicity《造型及型芯用的混合物 吸湿性测定法》.pdf

GOST 23409 12-1978 Moulding and core sand mixtures Method for determination of gas formation《造型及型芯用的混合物 充气二极管测定法》.pdf

GOST 23409 13-1978 Moulding sand mixtures Method for determination of compactibility and bulk density《造型用混合物 压实性及填实性测定法》.pdf

GOST 23409 14-1978 Moulding sand mixtures Accelerated method for determination of active bentonite content《造型用混合物 活性混凝土含量测定法》.pdf

GOST 23409 15-1978 Moulding sand mixtures Method for determination of mouldability《造型用混合物 成型性能测定法》.pdf

GOST 23409 16-1978 Moulding sand mixtures Method for determination of tensile strength limit in moisture condensation zone《造型用混合物 水分冷凝部分抗拉强度极测定法》.pdf

GOST 23409 17-1978 Moulding sand mixtures Method for determination of flowability under static load《造型用混合物 静力压实条件下流动性测定法》.pdf