SANS 6055-2006 Water - Orthophosphate content《水 正磷酸盐含量》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

DIN EN 61183-1994 Electroacoustics - Random-incidence and diffuse-field calibration of sound level meters (IEC 61183 1994) German version EN 61183 1994《电声学 声级计无规入射声场及扩散声场校正》.pdf

DIN EN 61187-1995 Electrical and electronic measuring equipment - Documentation (IEC 61187 1993 modified) German version EN 61187 1994《电气和电子测量仪 随机文件》.pdf

DIN EN 61188-1-1-1998 Printed boards and printed board assemblies - Design and use - Part 1-1 Generic requirements flatness considerations for electronic assemblies (IEC 61188-1-1 .pdf

DIN EN 61188-1-2-1999 Printed boards and printed board assemblies - Design and use - Part 1-2 Generic requirements controlled impedance (IEC 61188-1-2 1998) German version EN 61188.pdf

DIN EN 61188-5-1-2003 Printed boards and printed board assemblies - Design and use - Part 5-1 Attachment (land joint) considerations - Generic requirements (IEC 61188-5-1 2002) Ger.pdf

DIN EN 61188-5-2-2004 Printed boards and printed board assemblies - Design and use - Part 5-2 Attachment (land joint) considerations - Discrete components (IEC 61188-5-2 2003) Germ.pdf

DIN EN 61188-5-3-2008 Printed boards and printed board assemblies - Design and use - Part 5-3 Attachment (land joint) considerations - Components with gull-wing leads on two sides .pdf

DIN EN 61188-5-4-2008 Printed boards and printed board assemblies - Design and use - Part 5-4 Attachment (land joint) considerations - Components with J leads on two sides (IEC 611.pdf

DIN EN 61188-5-5-2008 Printed boards and printed board assemblies - Design and use - Part 5-5 Attachment (land joint) considerations - Components with gull-wing leads on four sides.pdf