SANS 61429-1995 Marking of secondary cells and batteries with the international recycling symbol ISO 7000-1135《带国际再循环利用符号ISO 7000-1135的二次电池和蓄电池的标记》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

HB 3541-1985 手用铰刀d=3~50mm.pdf

HB 3542-1985 手用铰刀技术条件.pdf

HB 3543-1985 单齿铰刀d=0.5~095mm.pdf

HB 3544-1985 单棱铰刀d=0.5~0.95mm.pdf

HB 3545-1985 三棱铰刀d=0.5~0.95mm.pdf

HB 3546-1985 四棱铰刀d=0.5~0.95mm.pdf

HB 3547-1985 圆柱形铰刀（直径小于1毫米的）技术条件.pdf

HB 3548-1985 套装式端面锪钻、锥面锪钻用刀杆d=6~8mm.pdf

HB 3549-1985 套装式端面锪钻、锥面锪钻用刀杆d=8~11mm.pdf