SANS 6193-2006 Corrugated fibreboard - Determination of thickness《瓦楞纤维板 厚度的测定》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM F2706-2008 Standard Test Methods for Occipital-Cervical and Occipital-Cervical-Thoracic Spinal Implant Constructs in a Vertebrectomy Model《在椎骨切除术模型中枕颈和枕颈-胸椎植入构造的标准试验方法》.pdf

ASTM F2706-2008(2014) Standard Test Methods for Occipital-Cervical and Occipital-Cervical-Thoracic Spinal Implant Constructs in a Vertebrectomy Model《椎骨切除术模型中枕颈和枕颈-胸椎脊骨植入结构的标准试验方法》.pdf

ASTM F2706-2017 Standard Test Methods for Occipital-Cervical and Occipital-Cervical-Thoracic Spinal Implant Constructs in a Vertebrectomy Model《椎骨切除术模型中枕颈和枕颈-胸椎脊骨植入结构的标准试验方法》.pdf

ASTM F2706-2018 Standard Test Methods for Occipital-Cervical and Occipital-Cervical-Thoracic Spinal Implant Constructs in a Vertebrectomy Model.pdf

ASTM F2707-2010 Standard Safety Performance Specification for Safe Design and Installation of Field Fabricated Suction-Limiting Vent Systems for Suction Entrapment Prevention in Sw.pdf

ASTM F2707-2010(2018)e1 Standard Safety Performance Specification for Safe Design and Installation of Field Fabricated Suction-Limiting Vent Systems for Suction Entrapment Preventio.pdf

ASTM F2709-2008 Standard Test Method for Determining Nameplate Recovery Rate of Stationary Oil Skimmer Systems《测定固定油水分离设备的铭牌回收率的标准试验方法》.pdf

ASTM F2709-2015 Standard Test Method for Determining a Measured Nameplate Recovery Rate of Stationary Oil Skimmer Systems《测定固定式撇油器系统测定的铭牌回收率的标准试验方法》.pdf

ASTM F2710-2008 Standard Consumer Safety Performance Specification for Commercial Cribs《商业婴儿床的标准消费者安全性能规范》.pdf