1、 Collection of SANS standards in electronic format (PDF) 1. Copyright This standard is available to staff members of companies that have subscribed to the complete collection of SANS standards in accordance with a formal copyright agreement. This document may reside on a CENTRAL FILE SERVER or INTRA
2、NET SYSTEM only. Unless specific permission has been granted, this document MAY NOT be sent or given to staff members from other companies or organizations. Doing so would constitute a VIOLATION of SABS copyright rules. 2. Indemnity The South African Bureau of Standards accepts no liability for any
3、damage whatsoever than may result from the use of this material or the information contain therein, irrespective of the cause and quantum thereof. SABS644Edition 11977ICS 61.060ISBN 0-626-13856-6(As amended 1979)SOUTH AFRICAN STANDARDSpecificationBoot and shoe sizing and markingSABS 644(Mondopoint s
4、ystem)Reprint 1981Published byTHE SOUTH AFRICAN BUREAU OF STANDARDSGr 9SABS 644Ed. 1ICS 61.060 SABS 644Ed. 1(As amended 1979)SOUTH AFRICAN BUREAU OF STANDARDSSPECIFICATIONBOOT AND SHOE SIZING AND MARKING(MONDOPOINT SYSTEM)Obtainable from the South African Bureau of Standards Private Bag X191 Pretori
5、a Republic of South Africa 0001 Telephone : (012) 428-7911Fax : (012) 344-1568E-mail : salessabs.co.zaWebsite : http:/www.sabs.co.zaCOPYRIGHT RESERVED Printed in the Republic of South Africa by theSouth African Bureau of StandardsSABS 644Ed. 12NoticeThis standard was approved in accordance with SABS
6、 procedures on 24 August 1977.NOTE 1 In terms of the Standards Act, 1993 (Act 29 of 1993), no person shall claim or declare that he or any otherperson complied with an SABS standard unlessa) such claim or declaration is true and accurate in all material respects, andb) the identity of the person on
7、whose authority such claim or declaration is made, is clear.NOTE 2 It is recommended that authorities who wish to incorporate any part of this standard into any legislation in themanner intended by section 31 of the Act consult the SABS regarding the implications.This standard will be revised when n
8、ecessary in order to keep abreast of progress. Comment will bewelcome and will be considered when the standard is revised.PrefaceThe Metrication Committee of the Footwear Industry appointed a select committee (known as theImplementation Committee) to introduce the Mondopoint shoe sizing system into
9、South Africa assmoothly as possible. The composition of this committee is given on page 4.The standard incorporates all ISO requirements and tables with suggested width intervals for use inSouth Africa are given in Appendix B and are intended to serve as a guide for the South AfricanFootwear Industr
10、y.The method of calculating the Mondopoint length of lasts is based on formulae developed by the Shoeand Allied Trades Research Association. The committee considered these to be the best available atthe time. (See also Appendix A.)Reprint incorporating Amendment No. 1 : 6 June 1979ISBN 0-626-13856-6
