1、 Collection of SANS standards in electronic format (PDF) 1. Copyright This standard is available to staff members of companies that have subscribed to the complete collection of SANS standards in accordance with a formal copyright agreement. This document may reside on a CENTRAL FILE SERVER or INTRA
2、NET SYSTEM only. Unless specific permission has been granted, this document MAY NOT be sent or given to staff members from other companies or organizations. Doing so would constitute a VIOLATION of SABS copyright rules. 2. Indemnity The South African Bureau of Standards accepts no liability for any
3、damage whatsoever than may result from the use of this material or the information contain therein, irrespective of the cause and quantum thereof. ISBN 978-0-626-21240-7 SANS 7240-16:2008Edition 1ISO 7240-16:2007Edition 1SOUTH AFRICAN NATIONAL STANDARD Fire detection and alarm systems Part 16: Sound
4、 system control and indicating equipment This national standard is the identical implementation of ISO 7240-16:2007 and is adopted with the permission of the International Organization for Standardization. Published by Standards South Africa 1 dr lategan road groenkloof private bag x191 pretoria 000
5、1 tel: 012 428 7911 fax: 012 344 1568 international code +27 12 www.stansa.co.za Standards South Africa SANS 7240-16:2008 Edition 1 ISO 7240-16:2007 Edition 1 Table of changes Change No. Date Scope National foreword This South African standard was approved by National Committee StanSA SC 5120.06C, F
6、ire safety Fixed fire detection and extinguishing systems, in accordance with procedures of Standards South Africa, in compliance with annex 3 of the WTO/TBT agreement. This document was published in July 2008. Reference numberISO 7240-16:2007(E)ISO 2007INTERNATIONAL STANDARD ISO7240-16First edition
7、2007-07-01Fire detection and alarm systems Part 16: Sound system control and indicating equipment Systmes de dtection et dalarme dincendie Partie 16: quipement de contrle et de signalisation des systmes sonores SANS 7240-16:2008This s tandard may only be used and printed by approved subscription and
8、 freemailing clients of the SABS .ISO 7240-16:2007(E) PDF disclaimer This PDF file may contain embedded typefaces. In accordance with Adobes licensing policy, this file may be printed or viewed but shall not be edited unless the typefaces which are embedded are licensed to and installed on the compu
9、ter performing the editing. In downloading this file, parties accept therein the responsibility of not infringing Adobes licensing policy. The ISO Central Secretariat accepts no liability in this area. Adobe is a trademark of Adobe Systems Incorporated. Details of the software products used to creat
10、e this PDF file can be found in the General Info relative to the file; the PDF-creation parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event that a problem relating to it is found, please inform the
11、Central Secretariat at the address given below. COPYRIGHT PROTECTED DOCUMENT ISO 2007 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permis
12、sion in writing from either ISO at the address below or ISOs member body in the country of the requester. ISO copyright office Case postale 56 CH-1211 Geneva 20 Tel. + 41 22 749 01 11 Fax + 41 22 749 09 47 E-mail copyrightiso.org Web www.iso.org Published in Switzerland ii ISO 2007 All rights reserv
13、edSANS 7240-16:2008This s tandard may only be used and printed by approved subscription and freemailing clients of the SABS .ISO 7240-16:2007(E) ISO 2007 All rights reserved iiiContents Page Foreword vi Introduction . viii 1 Scope . 1 2 Normative references . 1 3 Terms, definitions and abbreviated t
14、erms . 3 3.1 Terms and definitions. 3 3.2 Abbreviations 4 4 General requirements. 4 4.1 General. 4 4.2 Combined s.s.c.i.e. and c.i.e 4 4.3 Power supply. 4 5 General requirements for indications. 4 5.1 Display of functional conditions . 4 5.2 Display of indications. 5 5.3 Indications on alphanumeric
15、displays 5 5.4 Indication of the supply of power . 5 5.5 Additional indications 5 6 Quiescent condition . 5 7 Voice-alarm condition 6 7.1 Reception and processing of alarm signal 6 7.2 Alert signal Optional function 6 7.3 Evacuate signal. 6 7.4 Indication of the voice-alarm condition 6 7.5 Audible w
16、arning Optional function 7 7.6 Delay before entering the voice-alarm condition Optional function 7 7.7 Phased evacuation Optional function . 7 7.8 Silencing the voice-alarm condition . 8 7.9 Reset of the voice-alarm condition. 8 7.10 Output to alarm devices Optional function.8 7.11 Voice-alarm condi
17、tion output signal Optional function. 8 8 Fault-warning condition . 9 8.1 Reception and processing of fault signals 9 8.2 Indication of faults in specified functions 9 8.3 System fault. 10 8.4 Audible indication. 10 8.5 Reset of fault indications . 11 8.6 Fault-warning condition output signal . 11 9
18、 Disabled condition Optional function 11 9.1 General. 11 9.2 Indication of the disabled condition . 11 9.3 Indication of specific disablements 11 9.4 Disablement condition output Optional function. 12 10 Test condition Optional function . 12 10.1 General. 12 10.2 Indication of the test condition . 1
19、2 10.3 Indication of specific emergency loudspeaker zones in the test state. 12 SANS 7240-16:2008This s tandard may only be used and printed by approved subscription and freemailing clients of the SABS .ISO 7240-16:2007(E) iv ISO 2007 All rights reserved11 Manual mode control Optional function 12 11
20、.1 General . 12 11.2 Indications of emergency loudspeaker zones in the voice-alarm condition 13 11.3 Indication of emergency loudspeaker zones in the fault-warning condition Optional function 13 11.4 Indication of emergency loudspeaker zones in the disabled condition Optional function . 13 12 Interf
21、ace to external control device(s) Optional function 13 13 Emergency microphone Optional function . 14 13.1 General . 14 13.2 Microphone priority Optional function 14 13.3 Microphone emergency loudspeaker zone control Optional function. 14 14 Design requirements 14 14.1 General requirements and manuf
22、acturers declarations 14 14.2 Documentation 15 14.3 Mechanical design requirements 15 14.4 Electrical and other design requirements 16 14.5 Integrity of transmission paths 16 14.6 Accessibility of indications and controls . 16 14.7 Indications by means of light-emitting indicators. 17 14.8 Indicatio
23、ns on alphanumeric displays 17 14.9 Colours of indications 18 14.10 Audible indications . 18 14.11 Testing of indicators. 18 14.12 Audio performance . 18 14.13 Message store . 20 14.14 Redundant power amplifiers Optional function 20 15 Additional design requirements for software-controlled s.s.c.i.e
24、 21 15.1 General requirements and manufacturers declarations 21 15.2 Software documentation 21 15.3 Software design 22 15.4 Program monitoring 22 15.5 The storage of programs and data 22 15.6 Monitoring of memory contents 23 16 Marking. 23 17 Tests. 23 17.1 General . 23 17.2 Functional test. 24 17.3
25、 Test schedule 27 17.4 Output power. 28 17.5 Signal-to-noise ratio . 29 17.6 Frequency response of s.s.c.i.e. without microphone(s) . 30 17.7 Frequency response of s.s.c.i.e. with microphone(s) . 31 17.8 Cold (operational) . 32 17.9 Damp heat, steady state (operational) 33 17.10 Damp heat, steady st
26、ate (endurance) . 34 17.11 Impact (operational) 35 17.12 Vibration, sinusoidal (operational) 36 17.13 Vibration, sinusoidal (endurance) . 37 17.14 Supply voltage variation (operational) 38 17.15 Electromagnetic compatibility (EMC), immunity tests (operational). 39 18 Test report 40 Annex A (informat
27、ive) Use of optional functions 41 Annex B (informative) Common indications, controls and outputs when the s.s.c.i.e. and the c.i.e. are combined. 43 Annex C (informative) Interface between the s.s.c.i.e. and the emergency-detection system. 44 SANS 7240-16:2008This s tandard may only be used and prin
28、ted by approved subscription and freemailing clients of the SABS .ISO 7240-16:2007(E) ISO 2007 All rights reserved vAnnex D (informative) Explanation of access levels 45 Annex E (informative) Design requirements for software-controlled s.s.c.i.e. 47 SANS 7240-16:2008This s tandard may only be used a
29、nd printed by approved subscription and freemailing clients of the SABS .ISO 7240-16:2007(E) vi ISO 2007 All rights reservedForeword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing Internationa
30、l Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO,
31、also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical commi
32、ttees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the po
33、ssibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 7240-16 was prepared by Technical Committee ISO/TC 21, Equipment for fire protection and fire fighting, Subcommittee SC 3, Fi
34、re detection and alarm systems. This first edition of ISO 7240-16 together with ISO 7240-19 cancels and replaces IEC 60849:1998, which has been technically revised. ISO 7240 consists of the following parts, under the general title Fire detection and alarm systems: Part 1: General and definitions Par
35、t 2: Control and indicating equipment Part 4: Power supply equipment Part 5: Point-type heat detectors Part 6: Carbon monoxide fire detectors using electro-chemical cells Part 7: Point-type smoke detectors using scattered light, transmitted light or ionization Part 8: Carbon monoxide fire detectors
36、using an electro-chemical cell in combination with a heat sensor Part 9: Test fires for fire detectors (Technical Specification) Part 10: Point-type flame detectors Part 11: Manual call points Part 12: Line type smoke detectors using a transmitted optical beam Part 13: Compatibility assessment of sy
37、stem components Part 14: Guidelines for drafting codes of practice for design, installation and use of fire detection and fire alarm systems in and around buildings (Technical Report) SANS 7240-16:2008This s tandard may only be used and printed by approved subscription and freemailing clients of the
38、 SABS .ISO 7240-16:2007(E) ISO 2007 All rights reserved vii Part 15: Point type fire detectors using scattered light, transmitted light or ionization sensors in combination with a heat sensor Part 16: Sound system control and indicating equipment Part 19: Design, installation, commissioning and serv
39、ice of sound systems for emergency purposes Part 21: Routing equipment Part 22: Smoke-detection equipment for ducts Part 27: Point-type fire detectors using a scattered-light, transmitted-light or ionization smoke sensor, an electrochemical-cell carbon-monoxide sensor and a heat sensor A part 26 dea
40、ling with oil mist detectors and a part 28 dealing with fire protection control equipment are under development. SANS 7240-16:2008This s tandard may only be used and printed by approved subscription and freemailing clients of the SABS .ISO 7240-16:2007(E) viii ISO 2007 All rights reservedIntroductio
41、n Sound system control and indicating equipment (s.s.c.i.e.) forms part of a sound system for emergency purposes (s.s.e.p.). An s.s.e.p. operates automatically or manually in a building or structure to alert occupants to a hazard which may require their evacuation in a safe and orderly manner. Equip
42、ment to warn occupants is therefore required to function after the hazard has been detected. Fire in a building is a common hazard which is often detected by an automatic fire detection and alarm system. An s.s.e.p. may operate as part of a fire detection and alarm system or may function in conjunct
43、ion with other emergency detection systems, such as those for storms, earthquakes and bomb threats. The s.s.c.i.e. may be a separate unit or may be physically combined with the fire detection control and indicating equipment (see ISO 7240-2). This part of ISO 7240 has been prepared by Subcommittee I
44、SO/TC 21/SC 3 and is based on IEC 60849:1998, Sound systems for emergency purposes, prepared by the International Electrotechnical Commission IEC/TC 100, Audio, video and multimedia systems and equipment. This part of ISO 7240 follows the format of, and has similar requirements to, ISO 7240-2 and is
45、 drafted on the basis of mandatory functions which are to be provided on all s.s.c.i.e. and optional functions (with requirements) which may be provided. Each optional function is included as a separate entity, with its own set of associated requirements, in order for s.s.c.i.e. with different combi
46、nations of functions to comply with this part of ISO 7240. It is intended that the options be used for specific applications, as recommended in ISO 7240-19 and the emergency management plan. Other functions associated with an s.s.e.p. may also be provided, even if they are not specified in this part
47、 of ISO 7240. This part of ISO 7240 contains specific tests that subject the equipment to conditions likely to be met in practice, such as corrosion, vibration, direct impact, indirect shock and electromagnetic interference. Some tests specified are intended to assess the performance of the s.s.c.i.
48、e. under such conditions. The performance of the s.s.c.i.e. is assessed from the results obtained in specific tests. This part of ISO 7240 is not intended to place any other restrictions on the design and construction of such equipment. SANS 7240-16:2008This s tandard may only be used and printed by
49、 approved subscription and freemailing clients of the SABS .INTERNATIONAL STANDARD ISO 7240-16:2007(E) ISO 2007 All rights reserved 1Fire detection and alarm systems Part 16: Sound system control and indicating equipment 1 Scope This part of ISO 7240 specifies the requirements, test methods and performance criteria for sound system control and indicating equipment (s.s.c.i.e.) for use in buildings and structures as part of a sound system for emergency purposes (s.
