SANS 7592-1983 Calibrated round steel link lifting chains - Guidelines to proper use and maintenance《经校准的圆钢链起重链 适当使用和维护指南》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD WSS-M33J3-D4-2012 ENAMEL COMPLIANCE VOC HIGH SOLIDS THERMOSET BASECOAT BASECOAT CLEAR COAT WET-ON-WET PROCESS REDUCED VISCOSITY EXTERIOR TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M33J3-D5-2012 ENAMEL COMPLIANCE VOC HIGH SOLIDS THERMOSET CLEARCOAT BASECOAT CLEARCOAT WET-ON-WET PROCESS REDUCED VISCOSITY EXTERIOR TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M33J3-E1-2012 ENAMEL COMPLIANCE VOC HIGH SOLIDS THERMOSET CLEARCOAT BASECOAT CLEARCOAT WET-ON-WET PROCESS WITH WSS-M33J3-D1 ETCH RESISTANT EXTERIOR TO BE USED WITH FORD W.pdf

FORD WSS-M33J3-E2-2012 ENAMEL COMPLIANCE VOC HIGH SOLIDS THERMOSET BASECOAT BASECOAT CLEARCOAT WET-ON-WET PROCESS WITH WSS-M33J3-E3 ETCH RESISTANT EXTERIOR TO BE USED WITH FORD WS.pdf

FORD WSS-M33J3-E3-2012 ENAMEL COMPLIANCE VOC HIGH SOLIDS THERMOSET CLEARCOAT BASECOAT CLEARCOAT WET-ON-WET PROCESS WITH WSS-M33J3-E2 ETCH RESISTANT EXTERIOR TO BE USED WITH FORD W.pdf

FORD WSS-M33J3-F1-2012 ENAMEL COMPLIANCE VOC HIGH SOLIDS THERMOSET TINTED CLEARCOAT BASECOAT CLEARCOAT WET-ON-WET PROCESS EXTERIOR TO BE USED WITH FORD WSS-M99P1111-A (Shown on F.pdf

FORD WSS-M33J3-F2-2002 ENAMEL COMPLIANCE VOC HIGH SOLIDS THERMOSET TINTED CLEARCOAT WET-ON-WET WITH TWO-COMPONENT URETHANE BASECOAT CLEARCOAT SYSTEMS (Shown on WSS-M33J3-D1)《与两组分氨基.pdf

FORD WSS-M33J3-F3-2012 ENAMEL COMPLIANCE VOC HIGH SOLIDS THERMOSET TINTED CLEARCOAT BASECOAT CLEARCOAT WET-ON-WET PROCESS REDUCED VISCOSITY EXTERIOR TO BE USED WITH FORD WSS-M99P1.pdf

FORD WSS-M33J3-F4-2002 ENAMEL COMPLIANCE VOC HIGH SOLIDS THERMOSET TINTED CLEARCOAT BASECOAT CLEARCOAT WET-ON-WET PROCESS WITH WSS-M33J3-D1 ETCH RESISTANT EXTERIOR (Shown on WSS-M3.pdf