SEMI M3 7-1991 Standard for 125 mm sapphire substrates.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

BS EN ISO 17830-2016 Solid biofuels Particle size distribution of disintegrated pellets《固体生物燃料 分解碎块的粒度分布》.pdf

BS EN ISO 17834-2003 Thermal spraying - Coatings for protection against corrosion and oxidation at elevated temperatures《热喷涂 高温腐蚀和氧化防护涂层》.pdf

BS EN ISO 17852-2006 Water quality - Determination of mercury - Method using a combined preservation and digestion step followed by atomic fluorescence spectrometry《水质 汞测定 原子荧光光谱法的.pdf

BS EN ISO 17855-1-2014 Plastics Polyethylene (PE) moulding and extrusion materials Designation system and basis for specifications《塑料 聚乙烯 (PE) 模塑和挤塑材料 命名系统和基本规格》.pdf

BS EN ISO 17855-2-2016 Plastics Polyethylene (PE) moulding and extrusion materials Preparation of test specimens and determination of properties《塑料 聚乙烯(PE)模塑和挤塑材料 试样制备和性能测定》.pdf

BS EN ISO 17864-2006 Corrosion of metals and alloys - Determination of the critical pitting temperature under potientiostatic control《金属和合金的腐蚀 静电位控制下的临界点蚀温度测定》.pdf

BS EN ISO 17871-2015 Gas cylinders Quick-release cylinder valves Specification and type testing《气瓶 快速释放的气瓶阀 规格和型式试验》.pdf

BS EN ISO 17872-2007 Paints and varnishes - Guidelines for the introduction of scribe marks through coatings on metallic panels for corrosion testing《涂料和清漆 腐蚀试验用金属板涂层画线器标记的入门指南》.pdf

BS EN ISO 17879-2017 Gas cylinders Self-closing cylinder valves Specification and type testing《气瓶 自动关闭的钢瓶阀门 规格和型式试验》.pdf