SFS 2180-1979 《单法兰和柱螺栓法兰轴肩 定额压力PN10》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

SAE AMS 3638G-2012 Tubing Irradiated Polyolefin Plastic Electrical Insulation Pigmented Semi-Rigid Heat-Shrinkable 2 to 1 Shrink Ratio《热收缩比为2 1的热收缩半刚性电气绝缘着色散热聚烯烃塑料管》.pdf

SAE AMS 3639G-2012 Tubing Irradiated Polyolefin Plastic Electrical Insulation Clear Semi-Rigid Heat-Shrinkable 2 to 1 Shrink Ratio《电绝缘、洁净、半刚性、2 1收缩率热可收缩的经辐照聚烯烃塑料管》.pdf

SAE AMS 3642E-2012 Plastic Moldings Laminated Thermosetting Resin Glass Cloth Reinforced Heat Resistant《耐热的玻璃织物增强的热固树脂叠层塑料模制品》.pdf

SAE AMS 3643C-2011 Plastic Moldings Silicone Thermosetting Glass Roving Filled Heat Resistant《热固化玻璃纤维无捻粗纱填充的有机硅塑料耐热模制品》.pdf

SAE AMS 3644G-2006 Plastic Polyimide For Molded Rod Bar and Tube Plaque and Formed Parts《成型的聚酰亚胺棍才、棒材、管材、薄板材和成形部件》.pdf

SAE AMS 3645D-2012 Polychlorotrifluoroethylene Compression Molded-Heavy Sections Unplasticized《未增塑的聚氯三氟乙烯压缩模塑大型材》.pdf

SAE AMS 3646D-2012 Sheet Polychlorotrifluoroethylene (PCTFE) Molded Unplasticized《未增塑的聚氯三氟乙烯模塑薄板》.pdf

SAE AMS 3648C-2012 Tubing Polychlorotrifluoroethylene (PCTFE) Unplasticized《未增塑的聚氯三氟乙烯管》.pdf

SAE AMS 3649D-2012 Film Polychlorotrifluoroethylene (PCTFE) Unplasticized《未增塑的聚氯三氟乙烯薄膜》.pdf